Advertisement

Software Solutions: Building Blocks for FDA Compliance

December 5, 2006 10:48 am | Product Releases | Comments

Many medical device manufacturers have discovered that their choice of ERP

LISTED UNDER: Compliance Software | Injection Molding | Medical Device Testing

Injecting Design Into the Molding Process

November 10, 2006 10:24 am | Product Releases | Comments

There are a number of factors medical device manufacturers need to consider when using injection molded parts in their device. If they don’t, they may be caught by surprise when they think they are ready to move into full production on a part.

LISTED UNDER: Injection Molding | Injection Molding | Thermoplastics Molding

Innovations Series Presents: Scoping New Technologies

November 10, 2006 10:24 am | Product Releases | Comments

On the cover: Smith & Nephew's Condor System functions as a command center for the Digital OR. It offers voice-activated control. (Photo: Smith & Nephew)   Minimally invasive procedures offer tremendous advantages over more traditional techniques.

LISTED UNDER: Product Design
Advertisement

Micro-Abrasive Blasting

November 6, 2006 11:11 am | Product Releases | Comments

Micro-abrasive blasting is a simple, yet highly effective, method to clean, cut, deburr, or texture a wide variety of surfaces.

LISTED UNDER: Surface Modification | Micro Molding

Liquid Injection Molding

November 6, 2006 5:02 am | Product Releases | Comments

Limfast Liquid Injection Molding is a service offered for molding custom medical liquid silicone rubber components and bonded Silicone to metal or plastic components, delivered in prototype quantities within 10 working days.

LISTED UNDER: Injection Molding | Injection Molding | Silicon Molding

I.V. Drug Delivery Takes Another Evolutionary Step

October 13, 2006 9:50 am | Product Releases | Comments

I.V. containers have not experienced significant change since the introduction of plastic to replace glass in the 70s. This I.V. bag offers a variety of features that address many concerns healthcare providers have with today’s more traditional options. Hospira Inc.

LISTED UNDER: Transfer Devices | Full Service Contract Manufacturing

Plasma Processing System

October 13, 2006 9:46 am | Product Releases | Comments

The Flextrak Plasma Processing System improves the reliability and quality of medical devices through surface modification and ultra-cleaning. The plasma processes improve the bond uniformity and adhesion between dissimilar materials, enhancing the performance of end products, such as stents.

LISTED UNDER: Surface Modification | Surface Modification

Designing Devices for Patients on the Run

October 13, 2006 8:15 am | Product Releases | Comments

Medical monitoring devices are moving out of the hospital and into the hands of consumers, driving a shift to a platform approach for designing medical electronics.

LISTED UNDER: Design Services | Medical Device Testing | Component Testing
Advertisement

The Combination Products Event for 2007

October 11, 2006 8:48 am | Product Releases | Comments

Reed Life Sciences is excited to announce PharmaMedDevice—the only comprehensive forum that fully illuminates the convergence of the medical device, pharmaceutical, and biologic industries. The inaugural event will be co-located with Interphex, April 24-26, 2007, at the Jacob K.

LISTED UNDER: Business Planning | Microbiology/Chemical Testing | Medical Device Testing

Cutting Through the Red Tape of Combination Product Approvals

October 11, 2006 8:47 am | Product Releases | Comments

As the development and use of combination products increases, the FDA realizes it needs to establish specific guidelines to oversee this technology. This article explores some of the pivotal issues pertaining to how a combination drug-device, drug-biologic, or device-biologic is regulated.

LISTED UNDER: Regulatory Affairs

Innovation Plus Collaboration Equals a Successful Combination

October 11, 2006 7:37 am | Product Releases | Comments

Companies need to move rapidly to take advantage of developing trends in healthcare treatment modalities. This article examines many of the factors combination product manufacturers need to consider to accelerate their product’s time to market.

LISTED UNDER: Product Design | Microbiology/Chemical Testing | Wire and Cable

Helping Hand From Computer Giant Enhances Drug Delivery

October 11, 2006 7:37 am | Product Releases | Comments

This article describes how a design-centered company leveraged its innovative consumer design expertise from the audio-visual world and transferred this knowledge to its drug delivery device affiliate, while receiving the collaborative assistance from a computer technology leader.

LISTED UNDER: Design Services

Films That Dissolve Diagnostics Manufacturers' Needs

October 10, 2006 6:15 am | Product Releases | Comments

Dissolvable films are currently used in a variety of applications such as consumer breath freshener products and as vehicles for over-the-counter drug delivery. Manufacturers are also exploring the technology’s unique characteristics for use with in vitro diagnostic devices.

LISTED UNDER: Films | Product Design

Assembling the Perfect Design Team

October 10, 2006 6:15 am | Product Releases | Comments

Since most manufacturers do not staff experts in every area of technology they may need to create a finished medical device, collaborating with professionals who are can be the ideal formula for success.

LISTED UNDER: Design Services | Product Design

Fabricating Components . . . Rapidly

October 10, 2006 6:15 am | Product Releases | Comments

Medical device manufacturers require device components to be produced quickly to ensure their products are available to the marketplace as soon as possible. However, quality cannot be sacrificed in this effort. Rapid prototype tooling is a unique option that satisfies both of these two criteria.

LISTED UNDER: Rapid Prototyping | Prototyping | Rapid Prototyping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading