Advertisement

Clean Room Assembly

June 4, 2013 4:37 pm | Coastal Life Technologies | Products

ISO Class 8 Clean Room Assembly

LISTED UNDER: Cleanroom Assembly | Custom Assembly
Advertisement

Full service contract manufacturing

June 4, 2013 4:36 pm | Coastal Life Technologies | Products

Full service contract manufacturing

LISTED UNDER: Full Service Contract Manufacturing

Parylene conformal coatings

June 4, 2013 2:57 pm | Specialty Coating Systems | Products

With 11 locations around the world, SCS is the leader in ultra-thin, biocompatible Parylene conformal coating services and technologies and is pleased to announce SCS microRESIST™ Antimicrobial Parylene Technology.

LISTED UNDER: Device Coating | Surface Modification | Antimicrobial

GW/GR - GW Plastics Global Reach

June 3, 2013 4:08 pm | GW Silicones | Products

With world-class contract manufacturing locations located in the United States, Mexico, and China; GW/GR™ offers an efficient and standardized manufacturing platform. Our ISO-certified, environmentally controlled and highly standardized facilities are designed to operate interchangeably, and by maintaining manufacturing locations across the globe, GW Plastics is never far from our customers.

LISTED UNDER: Process Validation/QC | Supply Chain Management | Asia

GW/CM - GW Plastics Contract Manufacturing

June 3, 2013 4:04 pm | GW Silicones | Products

The world's market-leading companies turn to GW Plastics as a natural extension to their own production capabilities to injection mold and assemble their products. In addition to our precision plastic injection molding and tooling expertise, we provide turnkey contract assembly support with a lean manufacturing approach. We support a full range of secondary processes including automated and manual assembly, testing, decoration, packaging and fulfillment services in the United States with lower cost alternatives in China, Costa Rica and Mexico. Coupled with industry leading lean manufacturing innovation and a dedication to the rigorous disciplines of quality assurance, GW Plastics is a full service partner.

LISTED UNDER: Cleanroom Assembly | Custom Assembly | Full Service Contract Manufacturing

GW/PD - GW Plastics Product Development

June 3, 2013 3:58 pm | GW Silicones | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

GW/GR - GW Plastics Global Reach

June 3, 2013 3:19 pm | GW Plastics, Inc. | Products

With world-class contract manufacturing locations located in the United States, Mexico, and China; GW/GR™ offers an efficient and standardized manufacturing platform. Our ISO-certified, environmentally controlled and highly standardized facilities are designed to operate interchangeably, and by maintaining manufacturing locations across the globe, GW Plastics is never far from our customers.

LISTED UNDER: FDA-Registered | Supply Chain Management | Asia

GW/CM - GW Plastics Contract Manufacturing

June 3, 2013 3:17 pm | GW Plastics, Inc. | Products

The world's market-leading companies turn to GW Plastics as a natural extension to their own production capabilities to injection mold and assemble their products. In addition to our precision plastic injection molding and tooling expertise, we provide turnkey contract assembly support with a lean manufacturing approach. We support a full range of secondary processes including automated and manual assembly, testing, decoration, packaging and fulfillment services in the United States with lower cost alternatives in China, Costa Rica and Mexico. Coupled with industry leading lean manufacturing innovation and a dedication to the rigorous disciplines of quality assurance, GW Plastics is a full service partner.

LISTED UNDER: Injection Molding | Silicon Molding | Cleanroom Assembly

GW/PD - GW Plastics Product Development

June 3, 2013 2:25 pm | GW Plastics, Inc. | Products

GW Plastics recognizes that many companies have limited resources and budget constraints for developing new products. Additionally, some have limited plastics injection molding and tooling experience. This is where GW/PD™ can fill the gap. GW Plastics excels at Product Development and Design for Manufacturability (DFM) support. We are strong believers that early supplier involvement is critical to successful new product introductions. The goal of GW/PD™ (Product Development) is to reduce customer product cost and time-to-market.

LISTED UNDER: Design Services | Product Design | Product R&D

Packaging Consultants

May 9, 2013 10:35 am | Robert C. Vincek Design Associates | Products

Providing a full complement of packaging design, development, engineering, project management, troubleshooting and strategic planning support to fortune 500 and start-up businesses since 1996. We'll bring you the benefit of over 30 years of hands-on experience for maximum project impact and economies.

LISTED UNDER: Design Services | Consulting/Design | Labeling

Engineering Services

April 30, 2013 1:18 pm | Specialty Silicone Fabricators | Products

SSF’s engineering resources support production and engineering services. For production projects our engineering staff is intimately involved in process design, process development, material selection and validation. Our engineering staff has years of experience and familiarity with the processes ensuring that you receive both high value and consistent high quality output. If you are in the early phases of product realization or in the early stages of the Design Control process then Engineering Services is an option where SSF can provide valuable assistance in: Product design ● Design for manufacturability ● Feasibility testing ● Design confirmation testing ● Rapid prototype builds ● Material testing ● Performance testing.

LISTED UNDER: Design Services | Product Design | Product R&D

Contract Manufacturing

April 26, 2013 3:16 pm | Specialty Silicone Fabricators | Products

SSF can support all stages of manufacturing operations: from manual assembly to fully automated device and product manufacturing. We employ highly skilled operators and offer high precision manual manufacturing operations. SSF follows Lean Methods providing you with continual improvement in cost and yield. SSF can help in all aspects of your product development and production. In our manufacturing process we provide traceability of all components and materials. We have microbial control monitoring including product bioburden, pyrogen testing monitoring capabilities. We manufacture in an ISO Class 7 (Class 10,000) clean rooms, ISO Class 8 (Class 100,000) clean rooms and clean rooms.

LISTED UNDER: Full Service Contract Manufacturing | Design Services | Product Design

Medical Device Drug Combination Products

April 26, 2013 2:51 pm | Specialty Silicone Fabricators | Products

SSF is unique among medical contract manufacturers in that we collaborate daily with both device and pharmaceutical businesses. Recent projects include the assembly of multi-electrode neurological implants, the manufacture of ocular shunts made from biologically derived polymers, and thin film casting of drug eluting, bioresorbable orthopedic implants. SSF is appropriately licensed and registered for both device and drug manufacturing. Our business model, quality system, and facility layout are all designed for flexibility to meet the requirements of our clients. SSF’s Engineering and Quality Departments assist our drug-device clients in design, feasibility, prototyping, clinical builds and commercial release.

LISTED UNDER: Full Service Contract Manufacturing | Conceptual Design & Visualization | Design Services

Extrusion

April 26, 2013 1:28 pm | Specialty Silicone Fabricators | Products

At SSF, our extrusion process is unrivaled. We can vary the inside and outside to your exact specifications. Nothing is too small, too fine or too complicated for our engineers and designers. We are able to layer cross sections from many types of materials to create a product with unique features. Our processes can create a myriad of designs – thin walled, thick walled, ribbed, perforated or split. And we can design any profile of formed extrusions including bends, coils, or pigtails in single or multiple planes. We’ve even developed close tolerance multi-lumen silicone tubing with inner lumens that spiral or twist to a desired pitch. We fabricate to your personal specifications.

LISTED UNDER: Extrusion | Full Service Contract Manufacturing | Design Services

LED-Optimized Medical Electronics Coating Offers Operating Cost Savings

April 17, 2013 3:59 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

Dymax has introduced MD 1901-M, a flexible, high-performance, LED-curable coating for medical micro circuits typically used in hearing aids, wound-care devices, and medical pumps. 1901-M, developed to be tack free immediately after curing, helps prevent potential defects that could occur as a result of components being handled too soon.

LISTED UNDER: Device Coating | Flexible Circuits

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading