Advertisement

Injecting Design Into the Molding Process

November 10, 2006 10:24 am | Product Releases | Comments

There are a number of factors medical device manufacturers need to consider when using injection molded parts in their device. If they don’t, they may be caught by surprise when they think they are ready to move into full production on a part.

LISTED UNDER: Injection Molding | Injection Molding | Thermoplastics Molding

Innovations Series Presents: Scoping New Technologies

November 10, 2006 10:24 am | Product Releases | Comments

On the cover: Smith & Nephew's Condor System functions as a command center for the Digital OR. It offers voice-activated control. (Photo: Smith & Nephew)   Minimally invasive procedures offer tremendous advantages over more traditional techniques.

LISTED UNDER: Product Design

Liquid Injection Molding

November 6, 2006 5:02 am | Product Releases | Comments

Limfast Liquid Injection Molding is a service offered for molding custom medical liquid silicone rubber components and bonded Silicone to metal or plastic components, delivered in prototype quantities within 10 working days.

LISTED UNDER: Injection Molding | Injection Molding | Silicon Molding
Advertisement

Designing Devices for Patients on the Run

October 13, 2006 8:15 am | Product Releases | Comments

Medical monitoring devices are moving out of the hospital and into the hands of consumers, driving a shift to a platform approach for designing medical electronics.

LISTED UNDER: Design Services | Medical Device Testing | Component Testing

The Combination Products Event for 2007

October 11, 2006 8:48 am | Product Releases | Comments

Reed Life Sciences is excited to announce PharmaMedDevice—the only comprehensive forum that fully illuminates the convergence of the medical device, pharmaceutical, and biologic industries. The inaugural event will be co-located with Interphex, April 24-26, 2007, at the Jacob K.

LISTED UNDER: Business Planning | Microbiology/Chemical Testing | Medical Device Testing

Innovation Plus Collaboration Equals a Successful Combination

October 11, 2006 7:37 am | Product Releases | Comments

Companies need to move rapidly to take advantage of developing trends in healthcare treatment modalities. This article examines many of the factors combination product manufacturers need to consider to accelerate their product’s time to market.

LISTED UNDER: Product Design | Microbiology/Chemical Testing | Wire and Cable

Helping Hand From Computer Giant Enhances Drug Delivery

October 11, 2006 7:37 am | Product Releases | Comments

This article describes how a design-centered company leveraged its innovative consumer design expertise from the audio-visual world and transferred this knowledge to its drug delivery device affiliate, while receiving the collaborative assistance from a computer technology leader.

LISTED UNDER: Design Services

Films That Dissolve Diagnostics Manufacturers' Needs

October 10, 2006 6:15 am | Product Releases | Comments

Dissolvable films are currently used in a variety of applications such as consumer breath freshener products and as vehicles for over-the-counter drug delivery. Manufacturers are also exploring the technology’s unique characteristics for use with in vitro diagnostic devices.

LISTED UNDER: Films | Product Design
Advertisement

Fabricating Components . . . Rapidly

October 10, 2006 6:15 am | Product Releases | Comments

Medical device manufacturers require device components to be produced quickly to ensure their products are available to the marketplace as soon as possible. However, quality cannot be sacrificed in this effort. Rapid prototype tooling is a unique option that satisfies both of these two criteria.

LISTED UNDER: Rapid Prototyping | Prototyping | Rapid Prototyping

Assembling the Perfect Design Team

October 10, 2006 6:15 am | Product Releases | Comments

Since most manufacturers do not staff experts in every area of technology they may need to create a finished medical device, collaborating with professionals who are can be the ideal formula for success.

LISTED UNDER: Design Services | Product Design

Manufacturing Capabilities Brochure

September 7, 2006 5:12 am | Product Releases | Comments

Gauthier Biomedical, a leading provider of orthopedic and spinal instrumentation, has introduced a new brochure featuring the company’s capabilities, manufacturing and prototyping services, and ISO certification.

LISTED UNDER: Prototyping

The Art and Science of Rapid Prototyping

September 5, 2006 7:16 am | Product Releases | Comments

Speed is the name of the game in getting a product to market before the competition. One technique medical device manufacturers are employing to help achieve faster design cycles for their products is rapid prototyping.

LISTED UNDER: Rapid Prototyping | Prototyping | Rapid Prototyping

Critical Questions of Outsourcing

September 1, 2006 4:56 am | Product Releases | Comments

Medical device manufacturers’ interest in outsourcing is growing and with it come many misconceptions and questions.

LISTED UNDER: Full Service Contract Manufacturing | Prototyping | Rapid Prototyping

19 W External Power Family

August 8, 2006 12:51 pm | Product Releases | Comments

A 19-watt family of external switch-mode power supplies are the first in a family of power devices that meets with the requirements of the EPA’s Energy Star program. The PW148 series is available in desktop or wall plug-in styles with a single output of 15 to 19.

LISTED UNDER: Power Supplies | Product Design

Miniature Medical Connectors (3233)

August 8, 2006 12:50 pm | Omnetics Connector Corp. | Product Releases | Comments

Medical connectors need to be small, lightweight, and comfortable in use, but built for rugged handling and extended performance and reliability. These miniature medical interconnects suit those needs. Standard and custom designs and shapes have been applied to catheters, probes, and instruments.

LISTED UNDER: Connectors | Prototyping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading