Advertisement

Electronics Contract Manufacturing Services

May 18, 2012 9:58 am | Product Releases | Comments

Benchmark provided award-winning engineering and manufacturing services for the two devices above. Pictured left is AccuVein's non-invasive medical device used to locate difficult-to-find veins.

LISTED UNDER: Electromedical Contract Manufacturing | Full Service Contract Manufacturing | Full Service Contract Manufacturing

Connector Series Features Top or Bottom Contact Points

May 7, 2012 8:10 am | Product Releases | Comments

Hirose, a leader in the development of connector solutions, has developed a new series of FPC connectors that can be mated by utilizing either its top or bottom contact points...

LISTED UNDER: Product Design

Tight Tolerance Springs and Stamping Capabilities

April 5, 2012 6:24 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | Comments

Connecticut Spring & Stamping (CSS), a manufacturer of precision parts for the medical, aerospace, firearms and defense industries worldwide, announces that it will showcase...

LISTED UNDER: Stamping | Prototyping | Springs
Advertisement

Outer Member Rotating BLDC Motor Featuring Proprietary Hall Commutation Circuit

March 28, 2012 7:15 am | Product Releases | Comments

BEI Kimco Magnetics, a brand of Custom Sensors & Technologies (CST), Inc., has introduced the DXH15 Series Outer Member Rotating BLDC Motor to meet the high accuracy...

LISTED UNDER: Product Design

Cast Urethane Molding

March 16, 2012 5:58 am | Product Releases | Comments

RedEye On Demand, a rapid prototyping and direct digital manufacturing service provider, and business unit of Stratasys Inc., today announced it has added cast urethane molding...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Tape and Reel Packaged SMT Pin

March 2, 2012 5:23 am | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max is pleased to introduce a new SMT pin for use as a test point or for low profile board-to-board connections. These pins are available packaged on tape & reel for...

LISTED UNDER: Tapes | Prototyping

Impact-Modified PLA Compounds

February 10, 2012 6:54 am | Product Releases | Comments

Global custom engineered thermoplastics compounder RTP Company has expanded its line of polylactic acid (PLA) bioplastic compounds to include impact modified grades suitable...

LISTED UNDER: Product Design

Gently Removing and Long-Term Wear Adhesives

February 8, 2012 9:39 am | Product Releases | Comments

Adhesives Research, a leading developer and manufacturer of adhesive products, invites OEMs and product designers to learn about its newest adhesive technology for wound care and medical device products...

LISTED UNDER: Hydrophilic Coating | Product Design
Advertisement

Small Two-Phase Stepping Motor

January 30, 2012 6:50 am | Product Releases | Comments

Sanyo Denki America, Inc. has expanded on its successful compact and lightweight F2 Series with the addition of the industry's smallest 2-Phase Bipolar Stepping Motor.

LISTED UNDER: Cylinders | Product Design

Plug-and-Play Sensor Prototype Kit

January 25, 2012 6:27 am | Product Releases | Comments

Cal Sensors announces the global launch of a new Sensor Prototype Kit, a plug-and-play tool deigned to dramatically accelerate prototyping, validation and product development...

LISTED UNDER: Caps and Plugs | Plugs and Receptacles | Sensors

Multi-output Regulators Include Supervisory and Watchdog Timers

January 23, 2012 7:27 am | Analog Devices, Inc. | Product Releases | Comments

Analog Devices, Inc. introduced its ADP5041 and ADP5040 multi-output regulators. The regulators meet the increasing demand for greater power density by combining a high-efficiency, 3-MHz, 1.2-A buck regulator and two 300-mA LDOs (low dropout regulators)

LISTED UNDER: Timers and Controllers | Power Supplies | Product Design

SmartCamera Developer’s Kit with Precision Autofocus

January 18, 2012 6:23 am | Product Releases | Comments

D3 Engineering, New Scale Technologies and Sunex have teamed up to create a new OEM SmartCamera Developer’s Kit with precision autofocus in a compact size...

LISTED UNDER: Camera | Camera | Prototyping

Accelerate Product Innovation with Modular Technology Platform

January 9, 2012 6:57 am | Product Releases | Comments

Logic PD, offering a smarter way to innovate for all phases of a product’s lifecycle, is making rapid development using sophisticated technologies possible for leading-edge products.

LISTED UNDER: Product Design

Twin Power Solenoid Valve Technology

January 9, 2012 6:19 am | Product Releases | Comments

The Type 6624 microfluidic valve from Burkert Life Science combines the industry-proven rocker principle of Burkert’s Type 127 valve with a highly innovative new actuator.

LISTED UNDER: Solenoids | Solenoid Valve | Prototyping

CNC Bending of Wire and Tube for Medical Devices

January 4, 2012 6:05 am | Product Releases | Comments

Medical designers needing a source for custom 2D and 3D tubular and wire components will find Marshall Manufacturing’s capabilities of interest.When developing medical devices...

LISTED UNDER: Prototyping | CNC Machining | Laser Welding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading