Advertisement

Pneumatic Servo Dispense System Delivers Flow Control

September 1, 2011 5:50 am | Product Releases | Comments

Sealant Equipment & Engineering, Inc.’s new Pneumatic Servo Dispensing (PSD) system is a positive rod displacement metering system that combines the cost efficiency of a pneumatic drive motor...

LISTED UNDER: Cylinders | Control | Flow

Diaphragm Valves Developed for Reactive Fluids

August 27, 2010 7:10 am | Product Releases | Comments

The Tridak Model 475 Series diaphragm valves are designed to be used with low-to-medium viscosity fluids. The internal design of these dispensing valves prevent fluid contact with the actuating components...

LISTED UNDER: Diaphragm | Cylinders | Control

Clippard Instrument Laboratory offers a 356-page catalog

August 18, 2010 11:22 am | Product Releases | Comments

Clippard Instrument Laboratory, manufacturer of miniature fluid power products, offers a 356-page catalog.

LISTED UNDER: Cylinders | Miniature Valve | Control
Advertisement

Pumps Provide Clean Air-Flow

August 17, 2010 7:23 am | Product Releases | Comments

Series 660/680 WOB-L Piston pumps from Thomas incorporate a package of features to provide clean air-flow, long life, excellent efficiency, low noise, and low vibration.

LISTED UNDER: Vacuum | Cylinders | Flow

Valve Actuator Improves Dispense Valve Speed and Accuracy

July 6, 2010 7:29 am | Product Releases | Comments

Nordson EFD’s Backpack Valve Actuator can help companies produce more products in less time by cycling select EFD dispense valves two to three times faster than previously possible.

LISTED UNDER: Actuators | Dispense | Cylinders

Diaphragm Valves for Reactive Fluids

June 17, 2010 7:29 am | Product Releases | Comments

The internal design of these dispensing valves prevent fluid contact with the actuating components, making them ideal for use with reactive fluids, such as cyanoacrylates and solvent-based adhesives and coatings.

LISTED UNDER: Diaphragm | Cylinders | Control

Compact Proximity And Cylinder Position Sensors Resist Weld Slag

June 7, 2010 6:33 am | Product Releases | Comments

TURCK announces that the company’s BIM-UNR, BIM-UNT, and Q-pak sensors are now equipped with WeldGuard protection, making them impervious to weld slag and spatter often present in MIG and TIG welding environments.

LISTED UNDER: Cylinders | Sensors | Cylinders

Pump Combines Long Life With High Efficiency

May 17, 2010 7:16 am | Product Releases | Comments

The Thomas Model 2250 pressure/vacuum pump provides unprecedented levels of mobility and efficiency, combined with long life, in applications such as medical, analytical, and air sampling equipment and office machines.

LISTED UNDER: Vacuum | Cylinders | Air Pump
Advertisement

Speed Regulator Provides Long Stroke in Compact Length

April 6, 2010 5:08 am | Product Releases | Comments

In order to provide a wide variety of motion control solutions, the Super-K Model Kinechek is being offered with a long 4 or 6 in. stroke unit within a short overall length. These leak proof Kinechek models can handle loads of up to 1,200 lbs.

LISTED UNDER: Motor Speed Controllers | Cylinders

High Speed, Low Noise Ball Screws Designed to Increase Speed

March 23, 2010 9:58 am | Product Releases | Comments

With a small shaft diameter (ø 6.0 mm, ø 8.0 mm) to reduce the load on motors, and

LISTED UNDER: Ball and Lead Screws | Cylinders

Compact Electric Cylinders Offer Improved Performance

March 23, 2010 9:58 am | Product Releases | Comments

Electric cylinders are a cost effective, high-performance linear positioning alternative to pneumatic and hydraulic systems in applications requiring continuous thrust of ≤150 lb.

LISTED UNDER: Cylinders | Cylinders

Guided Motion Air Cylinders Feature Compact Design

March 23, 2010 9:58 am | Product Releases | Comments

A family of compact guided motion air cylinders features extended load carrying capabilities. Twin guide shafts provide precision, non-rotating positioning. Customers have the option of sleeve or ball bearings as well as four mounting methods. Dowel pin holes on mounting surfaces provide accuracy.

LISTED UNDER: Cylinders | Cylinders

Automated Machines Designed for Two to Three Component Processes

April 2, 2009 5:33 am | Product Releases | Comments

This line of automated assembly and inspection machines designed for two to three component assembly, test, and checks. These systems include two to three feeder bowls typically rated at 30 ppm each.

LISTED UNDER: Automation Equipment | Cylinders

Pneumatic Cylinder Calibrated for Precise 0 to 10 Volt DC Output

December 5, 2008 7:04 am | Bimba Manufacturing Company | Product Releases | Comments

Unlike traditional pneumatic feedback technology, these non-contact pneumatic position feedback cylinders are resistant to the effects of moisture, oil, airborne debris, and dust. In addition, each cylinder is factory calibrated for precise 0 to 10 volt DC output.

LISTED UNDER: Cylinders | Cylinders

Scanning Technology Delivers Throughput Gains

August 12, 2008 8:14 am | Renishaw, Inc. | Product Releases | Comments

Renscan5 motion control software delivers gains in coordinate measuring machine (CMM) inspection of critical and complex parts. Early adopters report 680% improvement on automotive cylinders heads and 922% faster processing of jet engine blisks.

LISTED UNDER: Software | Cylinders

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading