Advertisement

Magnetostrictive Position Sensor Designed for Cylinder Applications

April 7, 2008 10:14 am | Mts Systems Corp. | Product Releases | Comments

The redesigned Temposonics MT sensor is a magnetostrictive position sensor specifically designed to be embedded in welded and tierod style cylinders or any space-limited cylinder application with its diameter of 48 mm, reduced from the original MT sensor’s diameter of 58 mm.

LISTED UNDER: Others | Cylinders
Advertisement

Thermal Transfer Bar Code Label Printers

March 11, 2008 10:05 am | Tharo Systems, Inc. | Product Releases | Comments

The PA2000t label printer/applicator is a cost-effective accessory for the H-400/H-600 Series of thermal/thermal transfer bar code label printers.

LISTED UNDER: Labeling | Cylinders

Direct Acting Valve Rated for Mobile Voltage Operation

March 11, 2008 7:18 am | Product Releases | Comments

The XM Series inline valve is offered for multiple industrial applications in a variety of pneumatic markets. XM Series direct acting valves are available in both 3-way and 4-way versions.

LISTED UNDER: Other | Cylinders | Control

Ball Bushings (4589)

December 10, 2007 9:53 am | Misumi Usa, Inc | Product Releases | Comments

Round, square, and compact flange style single or double linear ball bushings are offered for a variety of industrial applications.

LISTED UNDER: Bearings | Cylinders

Twin Rod Air Cylinders

May 8, 2007 11:29 am | Humphrey Products Company | Product Releases | Comments

These twin rod air cylinders are a cost-effective means of achieving precise, non-rotating linear motion. The twin rod design has less than 1/3 of a degree of rotation, allowing precise rod alignment and virtually eliminating rod endplay for guided linear motion.

LISTED UNDER: Cylinders | Cylinders

Lifting Columns

February 7, 2007 9:41 am | Skf Linear Motion & Precision Technologies | Product Releases | Comments

Telemag TFG lifting columns offer compact, fast, and powerful solutions to deliver push or pull force for loads up to 2,500 N.

LISTED UNDER: Cylinders

Etching a Thermal Solution

November 10, 2006 10:24 am | Thermal Circuits, Inc. | Product Releases | Comments

The Project: Replace a wire heating system that was creating multiple problems, including system failure, in a hybridization oven. The Solution: Utilize etched foil elements to enable an efficient and effective heating solution. By Kevin Mooney Stovall Life Science Inc.

LISTED UNDER: Heating Elements | Cylinders | Heating Elements

Adhesive Cartridge System

November 6, 2006 5:02 am | Tah Industries, Inc. | Product Releases | Comments

These 200 through 600 ml adhesive cartridges offer an economical choice. The robust uni-body design has a rugged connection between the cylinders and offers a generous lead-in for ease of piston insertion.

LISTED UNDER: Adhesive Dispensers | Cylinders

Facing Double Jeopardy in the Testing of Combination Products

October 13, 2006 9:50 am | Microtest Laboratories, Inc. | Product Releases | Comments

Combination products can cause twice as many problems for companies in the testing of these devices since they require expertise in two highly regulated specialties—medical devices and pharmaceuticals. This article offers a number of areas manufacturers of these devices will have to consider.

LISTED UNDER: Medical Device Testing | Cylinders | Biocompatibility Testing

Pneumatic Products Catalog

September 7, 2006 5:12 am | Product Releases | Comments

MFD Pneumatics offers this 20-page pneumatic products catalog, focusing on product lines specific to the OEM’s low cost, quality component requirements.

LISTED UNDER: Cylinders | Control

Aluminum Gas Cylinders

August 25, 2006 6:15 am | Cyl-Tec, Inc. | Product Releases | Comments

Aluminum gas cylinders are available for medical O2 applications. The aluminum cylinders are as much as 50% lighter than traditional steel cylinders, making them easier to carry and handle.

LISTED UNDER: Other Supplies | Cylinders | Gas Valve

Cartridge Needle Valve

August 8, 2006 12:51 pm | Beswick Engineering Co., Inc. | Product Releases | Comments

This miniature cartridge needle valve is offered for precise flow adjustment in an extremely compact package. The product can be used to control mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications.

LISTED UNDER: Needle | Cylinders | Miniature Valve

Pneumatic Products Website

August 8, 2006 12:50 pm | Product Releases | Comments

A new website offers product and engineering information focusing on the specific needs of OEM’s in today’s highly cost competitive marketplace for pneumatic products.

LISTED UNDER: Cylinders | Component Testing

Rodless Band Cylinder

March 9, 2006 12:10 pm | Bimba Manufacturing Company | Product Releases | Comments

The Ultran Band rodless band cylinder addresses the unique sealing challenge of a mechanical piston/yoke connection and can be used in a variety of applications. It is available in a large variety of bore sizes, in both inch and metric versions and with a standard stroke length of up to 10 ft.

LISTED UNDER: Cylinders | Cylinders

Valves Website

August 31, 2005 9:19 am | Product Releases | Comments

Mead Fluid Dynamics, a leader in the field of pneumatic components, has redesigned and re-launched its website. The new site has been designed for easy navigation and provides technical information on control valves, cylinders, specialty valves, and production devices.

LISTED UNDER: Cylinders | Control

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading