Advertisement
Gears and Gearing

Planetary Gearhead Ideal for High Torque Applications

February 7, 2014 4:15 pm | by MDT Staff | Product Releases | Comments

Thanks to the sturdy construction, the Faulhaber metal Planetary Gearheads are ideal for applications which demand the highest torque. The new 17/1 gearhead is the latest addition to the Faulhaber gearhead product line in the 16 to 20 mm diameter range... 

LISTED UNDER: Gears and Gearing

High-Precision Gears and Mechanical Components at MD&M West

December 16, 2013 4:07 pm | by MDT Staff | Product Releases | Comments

Precipart will be exhibiting at MD&M West, February 11-13, 2014 in Anaheim, CA, with a wide range of high-precision machined parts, molded and assembled components used in medical devices.

LISTED UNDER: Gears and Gearing

Configurable DC Motors and Gearheads

November 25, 2013 2:57 pm | by MDT Staff | Maxon Precision Motors, Inc. | Product Releases | Comments

maxon motor’s  DCX series is being expanded with two new DC motors. The GPX 22 gearhead is now also available in a version with reduced noise level and with ceramic axes.

LISTED UNDER: DC Servo Motors | Gears and Gearing
Advertisement

One of the Few 1000:1 Ratios in the Industry

October 10, 2013 5:05 pm | by MDT Staff | Groschopp, Inc. | Product Releases | Comments

Groschopp has announced the release of an additional five ratios to their standard PL7300 planetary gearbox product line. In addition to our current robust design, we have nearly doubled our yield torque creating a longer life and use in a wider range of applications.

LISTED UNDER: Gears and Gearing

32 mm Planetary Gearhead for High Radial Loads

August 1, 2013 11:56 am | by MDT Staff | Maxon Precision Motors, Inc. | Product Releases | Comments

maxon motor has added two new gearheads to the already successful GP 32 program. Significant improvements have been made to the single-stage planetary gearhead: The planetary carrier has been reinforced, the bearings have been repositioned, and a ceramic version is now available.

LISTED UNDER: Gears and Gearing

4.0-mm Micro Motor and Gearhead

April 3, 2013 10:36 am | by MDT Staff | Maxon Precision Motors, Inc. | Product Releases | Comments

maxon motor introduces the EC4, a 4 mm diameter brushless DC motor and gearhead. The typical issue found with micro drives of this size is the output power is too low for the application requirements because of the physical limitations.

LISTED UNDER: Brushless DC Motors | Gears and Gearing

Cost-Effective, High-Performance Gear Reducer

February 22, 2013 10:43 am | by MDT Staff | Servo2Go.Com Ltd. | Product Releases | Comments

The new Able VRB Gear Reducer is an excellent alternative for OEMs that need a cost-effective, high-performance gear reducer. The high-precision and torque handling capabilities are an ideal fit for medical equipment.

LISTED UNDER: Gears and Gearing | Motor Speed Controllers

New Precision Gear & Dial Hubs from SI Designed To Fit Hubs with Limited Hub O.D., Eliminates Keys

July 2, 2012 1:49 pm | Product Releases | Comments

A new series of precision gear & dial hubs from Sterling Instrument are designed to fit gears or dials, plus eliminate keys or splines.

LISTED UNDER: Gears and Gearing
Advertisement

Family of 16 mm Metal Gear Motors

December 5, 2011 5:43 am | Product Releases | Comments

Nidec Copal (U.S.A.) Corporation of Torrance, CA has expanded their 0.630” (16 mm) OD brush and brushless DC gear motor product lines with the next generation MG16B...

LISTED UNDER: Gear Motors | Gear Motors | Gears and Gearing

Right Angle Helical Gear Drives Feature Base or Panel Mount Design

October 21, 2011 6:11 am | Stock Drive Products/Sterling Instrument | Product Releases | Comments

A new series of right angle helical gear drives from Stock Drive Products (SDP) (ISO 9001:2000 Registered Manufacturer) feature base or panel mount design.

LISTED UNDER: Gears and Gearing

Planetary Gearhead Is Designed for Low Noise Application Requirements

September 26, 2011 7:12 am | Micromo | Product Releases | Comments

MICROMO introduces the new 32ALN (32A Low Noise) gearhead from FAULHABER. The new planetary gearhead, designed for low noise application requirements, is optimized in combination with brushless motors.

LISTED UNDER: Gears and Gearing

70 Watt Brushless DC Motor With Gear and Encoder Options

September 16, 2011 7:06 am | Maxon Precision Motors, Inc. | Product Releases | Comments

maxon motor’s newly designed 70 Watts flat brushless motor delivers a max. continuous torque of 130 mNm at an efficiency of up to 85%. The new motor in its 45 mm diameter...

LISTED UNDER: Brushless DC Motors | Gear Motors | Brushless DC Motors

Helical Gear Drives Feature Built-In Keyway Design

June 29, 2011 7:27 am | Stock Drive Products/Sterling Instrument | Product Releases | Comments

A new series of hollow-shaft right angle helical gear drives from Sterling Instrument (SI) (ISO 9001:2000+AS9100B Registered Manufacturer) feature built-in keyways plus left or right hand rotation.

LISTED UNDER: Gears and Gearing

Gearheads Provide Robust Performance in Harsh Environments

March 17, 2011 7:38 am | Thomson Industries | Product Releases | Comments

Thomson introduces Micron AquaTRUE Planetary Gearheads, the industry’s only 100% stainless steel gearheads specifically designed to satisfy the demanding performance requirements...

LISTED UNDER: Gears and Gearing

Extruder Offers Clean, Quiet, Gearless Operation

January 21, 2011 6:26 am | American Kuhne | Product Releases | Comments

With a strong presence in the medical extrusion equipment market, American Kuhne has recently added to its impressive advanced technology extruder product line.

LISTED UNDER: Gears and Gearing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading