Advertisement
Electronic Components

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable
Advertisement

Multiradio Module

March 2, 2015 11:29 am | by u-blox | Product Releases | Comments

u-blox, a developer of wireless and positioning modules and chips, announces ODIN-W262, a new stand-alone multiradio module designed for Internet-of-Things applications. The professional-grade (-40 °C to +85 °C) module makes adding wireless connectivity to any product quick and easy...

LISTED UNDER: PCBs/Embedded Computer Boards

Compact Automotive-Grade Multiradio Modules

March 2, 2015 11:29 am | by u-blox | Product Releases | Comments

u-blox, a developer of wireless and positioning modules and chips, announces full production availability of the ELLA-W1 series of compact, automotive-grade, multiradio modules. The modules promise predictable, reliable results and easy implementation of in-car wireless connectivity...

LISTED UNDER: Boards and Modules

Wireless Framework

February 27, 2015 5:24 pm | by QNX Software Systems | Product Releases | Comments

The QNX Wireless Framework is a complete software solution that simplifies cellular and Wi-Fi connectivity for mHealth devices, industrial controllers, car infotainment units, and other embedded systems. Modem technology for embedded systems is evolving quickly, creating demand for system designs that can rapidly and flexibly...

LISTED UNDER: Systems Software

Laser Research Optics

February 25, 2015 12:04 pm | by Laser Research Optics | Laser Research Optics | Product Releases | Comments

A full line of laser-grade zinc selenide (ZnSe) optics including discs, output couplers, and mirrors that are optimized for medical Nd:Yag laser OEMs is available from Laser Research Optics of Providence, Rhode Island. Laser Research ZnSe Optics are optimized at 1064 nm and 10.6 microns for Nd:Yag lasers and include plano-convex and plane-parallel discs, output couplers, and mirrors. Suitab...

LISTED UNDER: Optoelectronics and Displays

Embedded Boards with High-Speed PCIe Expansion

February 24, 2015 3:31 pm | by VadaTech | VadaTech | Product Releases | Comments

VadaTech, a manufacturer of embedded boards and complete application-ready platforms, has announced two boards that provide high-speed PCIe Expansion from an industrial PC to MicroTCA, AdvancedTCA, or other systems. The versatile modules can be used with industry standard options for copper or fiber cables...

LISTED UNDER: PCBs/Embedded Computer Boards
Advertisement

DC Accelerometers

February 24, 2015 2:44 pm | by Measurement Specialties, Inc. | Product Releases | Comments

Measurement Specialties, now part of TE Connectivity, offers two new low-cost DC accelerometers that provide long term, stable measurements in structural and vibration monitoring applications. The rugged, high-performance Model 4020 and Model 4030 deliver MEMS capacitive sensing technologies and state-of-the-art...

LISTED UNDER: Accelerometer | MEMS

Dongle for Mobile or Wireless Conversion

February 24, 2015 11:57 am | by Laird Technologies | Product Releases | Comments

A new dongle that enables sophisticated, legacy equipment to be converted for mobile or wireless use is being introduced by global technology leader Laird (LRD: London), the company announced today. Legacy devices that have an operating system (OS) and a USB port, but no in-built Bluetooth or BLE functionality...

LISTED UNDER: Data Storage/Memory Device

High-Performance AMC Boards

February 23, 2015 7:40 pm | by VadaTech | VadaTech | Product Releases | Comments

VadaTech, a manufacturer of embedded boards and complete application-ready platforms, has announced two new high-performance AMC boards that utilize Xilinx All Programmable FPGAs. The AMC523 is a dual 16-bit 250 MSPS Digital-to-Analog Converter (DAC) featuring a XC7K410T Kintex-7 FPGA from Xilinx...

LISTED UNDER: PCBs/Embedded Computer Boards

Clamshell BGA Socket with Heat Sink Lid

February 20, 2015 5:04 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics has recently introduced a new BGA socket design using high performance elastomer capable of 75GHz, very low inductance and wide temperature applications. The GT-BGA-2019 socket is designed for 25x25 mm package size and operates at bandwidths up to 75GHz with less than 1dB of insertion loss...

LISTED UNDER: Sockets

Hypervisor

February 19, 2015 5:21 pm | by QNX Software Systems | Product Releases | Comments

The QNX Hypervisor 1.0 is a realtime Type 1 hypervisor that can be used for developing medical devices. By using the QNX Hypervisor, medical device developers can consolidate multiple operating systems onto a single compute platform or system-on-chip (SoC), thereby reducing the cost, size, weight, and power consumption of their products. The QNX Hypervisor is designed to simplify certification...

LISTED UNDER: Systems Software

Drive Cable with Multi-Stranded Flexible Torque Shaft

February 19, 2015 3:11 pm | by ASAHI INTECC USA, INC. | ASAHI INTECC USA, INC. | Product Releases | Comments

Asahi Intecc now offers high speed rotation stainless steel miniature drive cables for medical device and industrial applications requiring diameters less than 1/3”. The Asahi Drive Cable is a multi-layer, multi-filar, stranded flexible shaft with high bi-directional torque transmission properties with minimal backlash or lag. The multi-stranded...

LISTED UNDER: Wire and Cable

EMI/RFI Shielding Product Guide

February 19, 2015 11:09 am | by Tech-Etch, Inc. | Tech-Etch, Inc. | Product Releases | Comments

The EMI/RFI Shielding Product Guide from Tech-Etch describes and pictures shielding products in a useful side-by-side comparison format. The eight-page brochure compares mounting, composition, size range, effective compression range, type of seal, contact interface, and performance data for all standard EMI shielding products. These include beryllium copper finger stock configured as alternate...

LISTED UNDER: Seals and Gaskets | EMI/RFI Shielding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading