Advertisement
Electromechanical/Mechanical Devices

Low Cost, High Precision XYθ Alignment Stages

October 29, 2014 7:23 pm | by MDT Staff | Product Releases | Comments

Optimal Engineering Systems’ (OES) low profile, XYθ (theta) stages are designed for high precision alignment applications. These stages move in an XY-plane and rotate around the center of the XY-plane. The terms alignment table, or XY-rotation stage are often used interchangeably with XYθ, or XY-theta stage...

LISTED UNDER: Positioning Stages and Tables

Fully Illuminated 30mm Pushbutton

October 24, 2014 4:11 pm | by MDT Staff | APEM Components, Inc. | Product Releases | Comments

APEM, Inc. is pleased to announce the new FP30 series pushbutton. Available in either snap-in or threaded bush mounting, this large but lightweight pushbutton is only 1.5 to 2.5mm for the snap in version, and 1 to 9mm for the threaded bushing version...

LISTED UNDER: Switches/Pushbuttons | Automation Equipment

Dip Coded Rotary with Vertical Thumbwheel

October 24, 2014 2:56 pm | by MDT Staff | APEM Components, Inc. | Product Releases | Comments

APEM, Inc., a leading global manufacturer of high quality man-machine interface products, is launching the DH Series, a completely reflow solderable 10-position DIP coded rotary switch with a permanently fixed thumbwheel. Available as PCB left or right surface

LISTED UNDER: Switches/Pushbuttons | Rotary
Advertisement

BLDC Flat Motors

October 24, 2014 5:43 am | by MDT Staff | Product Releases | Comments

Where high precision is essential and space is tight, BLDC flat motors of the DF45 series from Nanotec, headquartered in Feldkirchen near Munich/Germany, are the solution of choice. These 16-pin outrunners have a standard diameter of 45 mm, and size L has a length of 27 mm and a nominal output of 65 watts. Nanotec has now expanded the series to include sizes S and M with outer lengths of 18 mm...

LISTED UNDER: Brushless DC Motors

'All-in-One' Focus Module

October 21, 2014 9:35 am | by MDT Staff | New Scale Technologies, Inc. | Product Releases | Comments

New Scale Technologies, Inc. has announced the M3-FS focus module, its newest miniature all-in-one focus module for high-performance industrial, medical and scientific OEM cameras. The M3-FS focus module is a drop-in replacement for the company’s original M3-F focus module, with compatible size and identical electrical connections and software commands...

LISTED UNDER: Linear Motion Systems

Linear Smart Stage Developer’s Kit

October 21, 2014 9:22 am | by MDT Staff | New Scale Technologies, Inc. | Product Releases | Comments

The M3-LS Linear Smart Stage is a direct-drive, high-precision micro stage built for fast, simple integration into miniature OEM systems. Closed-loop positioning is achieved with an integrated absolute encoder with 0.5 µm resolution. This stage does not require homing or zeroing at first power-up...

LISTED UNDER: Linear Motion Systems

Ultra-Low Profile Top-Actuated Tactile Switches

October 20, 2014 4:44 pm | by MDT Staff | Product Releases | Comments

C&K Components, a leading international supplier of tact switches, toggle and rocker switches, and smart card interconnect devices, has developed a series of surface mount ultra low profile top-actuated tactile switches with extended operating lifecycles up to 500,000. The switches measure just 3.7mm x 3.7mm with a board-mounted profile of 0.35mm. The PTS 540 Series tactile switches are RoHS...

LISTED UNDER: Switches/Pushbuttons

Lightweight Servo Drives

October 20, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Weighing 8.5 grams and capable of outputting 10A peak and 5A continuous µZ’s are the smallest off-the-shelf servo drives from ADVANCED Motion Controls. Pronounced ‘Micro-Z’ these plug-in drives are designed for embedded applications in a wide range...

LISTED UNDER: Drives
Advertisement

'Smart' Technology Platform

October 2, 2014 8:30 am | by MDT Staff | Bimba Manufacturing Company | Product Releases | Comments

Bimba Manufacturing, an industry leading innovator of actuation technology, today announced the introduction of IntelliSense, a technology platform that will enable users to be proactive about maintenance and system optimization. A one-of-its-kind...

LISTED UNDER: Cylinders | Sensors | Air Pump

'Sensing Sensation' Sphere

September 25, 2014 8:30 am | by MDT Staff | Honeywell Sensing And Control | Product Releases | Comments

Honeywell announced that it will be showcasing a variety of products at the upcoming Electronica show in Hall 13, Booth 325 November 11-14 in Munich. Among those, will be two new products introduced this year, Honeywell’s Anisotropic Magnetoresistive (AMR)...

LISTED UNDER: Input Devices | Sensors

Miniature Illuminated Tact Switch

September 22, 2014 8:30 am | by MDT Staff | Product Releases | Comments

E-Switch announces the TL6210 series tact switch, offering a host of features including: surface mount termination, miniature footprint, and sealed to IP67 ratings. It also offers illumination, with LED colors that include red, green, yellow, blue, white...

LISTED UNDER: Switches/Pushbuttons

Customized Direct Drive Motors

September 12, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Applimotion’s Frameless Direct Drive motor kits have been used in custom direct drive motors for more than 15 years in Automation Systems, Robotics, Semiconductor Equipment, Medical Devices and...

LISTED UNDER: Drives

New Bushed Para-Flex Couplings

September 10, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Baldor Electric Company is proud to announce a new addition to its Baldor-Dodge coupling product offering -- the QD bushed Para-Flex coupling. The QD flange design complements the company’s Taper-Lock... 

LISTED UNDER: Couplings

Compact Servo Drive: Up to 1000 W of Motor Power

September 5, 2014 8:30 am | by MDT Staff | Allied Motion | Product Releases | Comments

The SXD 15 is the first in a new series of economical advanced digital servo drives from Allied Motion. This compact, modular unit can drive a DC brush, DC brushless or AC brushless motor requiring...

LISTED UNDER: Drives

Industrial Integrated Motor Systems for Machine Automation

August 25, 2014 8:30 am | by MDT Staff | Ims Schneider Electric Motion Usa | Product Releases | Comments

Circular M12 connectors are now available on Lexium MDrive® integrated motor-drive-controller-encoder systems for industrial automation applications. Industry standard...

LISTED UNDER: Drives | Encoders

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading