Advertisement

Telescopic Pillar Helps Medical OEMs Boost Sales

March 7, 2014 1:30 pm | by MDT Staff | Product Releases | Comments

SKF has launched a telescopic pillar for the movement of medical procedure equipment that enables OEMs to offer greater load capacity and speed in surgical chairs and tables compared to previous models. The SKF Telescopic pillar – series CPMT helps OEM customers to increase sales by providing equipment that meets market demands and increases patient throughput in busy healthcare centers...

LISTED UNDER: Cylinders | Positioning Stages and Tables | Slides

Chemically Resistant Containment Tank Couplings

March 7, 2014 11:56 am | by MDT Staff | LinkTech Couplings | Product Releases | Comments

The new 50PP Series Quick Couplings offer greater chemical resistance along with a more robust thumb-latch technology for greater durability. They are produced from gamma sterilizable, medical grade polypropylene with standard EPDM O-rings...

LISTED UNDER: Couplings | Polypropylenes

Nanopositioning Stage & Digital Controller

March 5, 2014 5:19 pm | by MDT Staff | Piezo Technologies | Product Releases | Comments

Piezo Nanopositioning Systems specialist PI (Physik Instrumente) LP – has introduced a new piezo-Z nanopositioning system for imaging and fast focusing applications. It consists of large aperture piezo stage and a digital controller. PI’s new P-736.ZR Large Aperture flexure-guided piezo nanopositioning stages are optimized for high resolution...

LISTED UNDER: Positioning Stages and Tables
Advertisement

LC Series Lifting Columns Provide Safe Reliable, Telescopic Motion

March 5, 2014 5:06 pm | by MDT Staff | Product Releases | Comments

Thomson Industries has introduced a new series of Lifting Columns offering compact, telescopic motion pre-aligned motion solutions. The LC Series requires no maintenance throughout their lifetime.  These innovative products can save cost on overall machine design and are ideal for providing telescopic motion in medical and ergonomic applications...

LISTED UNDER: Positioning Stages and Tables

Sealed Absolute Linear Encoders with Mitsubishi Interface

March 5, 2014 4:54 pm | by MDT Staff | Heidenhain Corp. | Product Releases | Comments

The new absolute LC 195M and LC 495M sealed linear encoders from Heidenhain are now available for use on machines that require a Mitsubishi interface. These new encoders improve upon Heidenhain’s already successful LC xx3 series, as the LC 195M/495M now focus on the requirements for purely-serial absolute systems for Mitsubishi drive components...

LISTED UNDER: Encoders

32 HD Motor with Planetary Gearhead

March 3, 2014 1:48 pm | by MDT Staff | Maxon Precision Motors, Inc. | Product Releases | Comments

The different versions of the EC-4pole 32 HD are designed for operation in air or in oil (flooded in hydraulic oil). The power rating depends on the surrounding medium and amounts to 220 W in air and, due to the much higher heat flow, 480 W in oil...

LISTED UNDER: Other Motors

OMS Provides Rock-solid Multi-axis Motion Control

March 3, 2014 12:26 pm | by MDT Staff | Pro-Dex | Product Releases | Comments

For design engineers seeking reliable, versatile, air motors for use in product design or automation assistance, Pro-Dex offers up to a $200 rebate when two air motors are purchased. Rebate amount varies depending upon model purchased... 

LISTED UNDER: Motor Speed Controllers

Trapezoidal Lead Screw Drives

February 26, 2014 10:17 am | by MDT Staff | Product Releases | Comments

DryLin TR lead screw drives are based on oil-free, self-lubricating plastic nuts offering a long service life. Since they do not require lubrication, they are ideal for sensitive laboratory and hospital equipment, as well as very dirty or corrosive environments...

LISTED UNDER: Ball and Lead Screws | Drives
Advertisement

Interior Permanent Magnet Brushless Motors

February 14, 2014 3:06 pm | by MDT Staff | Product Releases | Comments

Applimotion’s ULT, UTH, UTS, and UTO frameless motor kits cover a wide range of applications in direct drive motion control with their large through-hole surface permanent magnet (SPM) rotor configurations. Applimotion is now offering interior permanent magnet (IPM) versions of these motor kits extending capabilities to new applications...

LISTED UNDER: Brushless DC Motors

New Slip-Ease Clutches Offer Improved Backlash

February 14, 2014 2:48 pm | by MDT Staff | Product Releases | Comments

Sterling Instrument offers a new, low backlash variant on its existing line of multi-plate in-line slip clutches. Both versions feature an all mechanical design, which makes them considerably cheaper than electro-mechanical alternatives. The slip plates are layered with friction pads in between...

LISTED UNDER: Brakes and Clutches

World’s Smallest High-voltage Reed Switch

February 11, 2014 1:38 pm | by MDT Staff | Standex Electronics | Product Releases | Comments

Standex-Meder Electronics has announced the release of the world’s smallest high-voltage switch: the KSK-1A35/1 miniature reed switch. At a maximum glass length of 10.5 and an overall lead length of 34.5mm, the KSK-1A35/1 can work with applications that may require the extra sensitivity of an ultra-miniature reed switch...

LISTED UNDER: Reed Switch

Planetary Gearhead Ideal for High Torque Applications

February 7, 2014 4:15 pm | by MDT Staff | Product Releases | Comments

Thanks to the sturdy construction, the Faulhaber metal Planetary Gearheads are ideal for applications which demand the highest torque. The new 17/1 gearhead is the latest addition to the Faulhaber gearhead product line in the 16 to 20 mm diameter range... 

LISTED UNDER: Gears and Gearing

New High Accuracy Magnetic Encoder

January 28, 2014 4:06 pm | by MDT Staff | Product Releases | Comments

Novotechnik U.S. has introduced the Vert-X 51 Series of rotary magnetic encoders which feature 12-, 14- or 16-bit resolution and repeatability to 0.36° or ±0.1° – depending on model. Measurement range of the Vert-X 51 is 0 to 360° and physical measurements of the housing are 30 mm x 50 mm.

LISTED UNDER: Encoders

High Performance Parallel Shaft FX Gear Motors

January 28, 2014 4:01 pm | by MDT Staff | Product Releases | Comments

Bodine Electric Company announced that it has expanded its popular FX line of parallel shaft gear motors to include AC models. The all-new 42R6-FX combines Bodine’s new, 3-wire reversible 42R frame AC induction motor with their completely redesigned and updated FX gearhead.

LISTED UNDER: Gear Motors

MEMS Technology Enables Pulse Activity Tracker

January 27, 2014 3:27 pm | by MDT Staff | Analog Devices, Inc. | Product Releases | Comments

Analog Devices announced that the ADXL362 MEMS accelerometer is integrated into the Pulse activity tracker developed by Withings. The Pulse activity tracker is a pocket-sized tool designed to help users to achieve their personal health and fitness goals.

LISTED UNDER: MEMS

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading