Advertisement

Motor Feedback System

April 1, 2005 6:01 am | Stegmann, Inc. | Product Releases | Comments

The SKS 36 SinCos Motor Feedback System with Hiperface interface is more than a small version of a conventional rotary encoder. Its construction is fundamentally different, with a minimum number of components to open the door to the production of truly miniaturized rotary encoders.

LISTED UNDER: Encoders
Advertisement

Linear Guide System

April 1, 2005 6:01 am | Bosch Rexroth Corporation | Product Releases | Comments

The high-precision Ball Rail System greatly reduces rolling, pitching, yawing deviations in linear guideways due to ball recirculation. The result is extremely smooth motion with virtually no deviation in the X, Y, or Z direction.

LISTED UNDER: Linear Motion Systems

Vacuum Motor

April 1, 2005 6:01 am | Lin Engineering | Product Releases | Comments

The Nema size 11, 1.8 degree 211 vacuum rated series motors measure 1.1 in. square and are available in three lengths: the 211-13 is 1.24 in, the 211-18 is 1.75 in., and the 211-20 is 1.99 in. The 211-13 products 9.2 oz-in. of holding torque, the 211-18 produces 13.7 oz-in.

LISTED UNDER: Pneumatic Motors

Ball Nut

April 1, 2005 6:01 am | Steinmeyer, Inc. | Product Releases | Comments

By incorporating spacers between the balls and plastic tubes in the recirculating channels, this company has succeeded in producing a ball nut&#151the UltraSpeed KES&#151specifically designed for applications demanding high speed capability as well as consistent pulsation-free motion at slow speeds.

LISTED UNDER: Ball and Lead Screws

Brushless DC Motor (1855)

April 1, 2005 5:33 am | Product Releases | Comments

The 000-0358 high performance brushless DC frameless motor is designed for low voltage applications where a high acceleration, high torque motor is required at low speeds. At 48 volts, this motor operates at 200 rpm and comfortably delivers 600 oz-in. of torque with an efficiency of 80 percent.

LISTED UNDER: Brushless DC Motors

Customized Mechatronic Solutions

April 1, 2005 5:33 am | Skf Usa Inc. | Product Releases | Comments

Integrated component designs and systems for medical applications enable precise, reliable, and quiet operation and performance of equipment and devices, including those specified for use in demanding cleanroom and vacuum settings.

LISTED UNDER: Linear Motion Systems | Actuators | Actuators

Magnetic Absolute Encoder

April 1, 2005 5:33 am | Baumer Ltd. | Product Releases | Comments

The MagRes magnetic absolute encoder line is specifically designed for medical equipment and devices requiring extremely precise direction and position monitoring.

LISTED UNDER: Encoders

Actuator (1823)

February 28, 2005 8:49 am | Thk America, Inc. | Product Releases | Comments

The Type VLA actuator has fewer components and a lower overall cost, by using a THK LM Guide for its base. Long-term cost savings are also realized through the Type VLA’s incorporation of patented caged technology, a QZ Lubricator, and electro-mechanical components.

LISTED UNDER: Actuators | Cylinders

Stainless Steel Interfaces

February 28, 2005 8:49 am | Eao Corporation | Product Releases | Comments

When the environment demands, stainless steel switches, keypads, and keyboards offer protection of up to IP67 standards against water, heat, shock, and vibration. These durable products require minimal maintenance and ultimately deliver long-term value in regards to life-cycle cost benefits.

LISTED UNDER: Switches/Pushbuttons

Hollow Shaft Gearmotors

February 28, 2005 8:49 am | Bodine Electric Company | Product Releases | Comments

The hollow shaft designs of a line of gearmotors (right angle, AC, DC, and BLDC) optimize mountings&#151saving on assembly labor and reducing the number of component parts. The hollow output shaft can be connected directly to the driven load.

LISTED UNDER: Gear Motors

Linear Motor

February 28, 2005 8:08 am | Copley Controls Corp. | Product Releases | Comments

The ServoTube linear motor’s patented magnetic design enables a high accuracy Hall position sensor to replace the delicate and expensive optical encoder. Eliminating the encoder removes the principal barrier to “universal” linear motor use and restores the motor’s intrinsic ruggedness.

LISTED UNDER: Linear Motors

DC Servo Motor

February 1, 2005 9:21 am | Bodine Electric Company | Product Releases | Comments

The e-TORQ Direct Drive Brushless DC Servo Motors employ a unique electromagnetic design to improve efficiency, minimize size, and maximize torque. The motors are ideal for OEMs where high torque, very compact design, enclosed construction, and economy are necessary.

LISTED UNDER: DC Servo Motors

Pneumatic Cylinder

February 1, 2005 7:08 am | Bosch Rexroth Corporation | Product Releases | Comments

Booth 2016 The guided pneumatic cylinder (GPC) is equipped with two rigid guide rods supported by either slide bearings or ball bearings, which offer a high level of stability.

LISTED UNDER: Cylinders | Cylinders

Stepper Motors (1733)

February 1, 2005 7:08 am | Pennengineering Motion Technologies | Product Releases | Comments

Booth 2543 All three series of the latest MAE brand hybrid stepper motors can deliver accurate open loop control for high-performance positioning applications. MAE “Y Series” motors incorporate AlNiCo magnets and are well suited for high-speed operation.

LISTED UNDER: Step Motors

Rotary Encoders (1721)

February 1, 2005 6:52 am | Product Releases | Comments

The Nemicon line consists of over 2,000 rotary encoders, ranging from miniature rotary encoders as small as 0.472 in. diameter up to 3.93 in. diameter models. These encoders achieve high resolution, high noise immunity, and high reliability all at a low price.

LISTED UNDER: Encoders

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading