Advertisement

Rocker Switches

May 3, 2005 8:23 am | Nkk Switches | Product Releases | Comments

The MLW series of lighted, snap-in, rugged, illuminated rocker devices feature a stainless steel

LISTED UNDER: Switches/Pushbuttons | Actuators | Actuators
Advertisement

Pressure Switch

May 3, 2005 8:23 am | Gems Sensors Inc. & Controls | Product Releases | Comments

The PS41 series of pressure switches incorporates two design principles to achieve excellent performance characteristics. The switches utilize an internal piston to allow high proof pressure, while gaining sensitivity and accuracy from a diaphragm media interface.

LISTED UNDER: Switches/Pushbuttons

Angle Encoders

May 3, 2005 8:23 am | Renishaw, Inc. | Product Releases | Comments

The Signum RESM optical angle encoders make an ideal fit for direct drive rotary (DDR) motors, eliminating position error and backlash while delivering speeds to over 3,600 rev/min, accuracy to &#1770.5 arc second, plus resolution and repeatability to 0.02 arc second.

LISTED UNDER: Encoders

MDT Exclusive: Gearhead

May 3, 2005 8:13 am | Hd Systems, Inc. | Product Releases | Comments

This gearhead is ideally suited for medical applications due to its high performance and reliability. The CSF-XHJ Size 8 gearhead delivers 2 arc-min positional accuracy in a package size that is just 32 mm (square) x 49 mm long. It has a rated torque of 21 in-lb and a maximum torque of 80 in-lb.

LISTED UNDER: Gear Motors

Brushless Motor (1943)

May 3, 2005 8:13 am | Maxon Precision Motors, Inc. | Product Releases | Comments

The EC-powermax 30-mm brushless motors deliver the performance and lifetime of a brushless motor, but in a very compact package. The motors are electronically commutated, thus enabling extremely long motor life, since there are no mechanical brushes to wear out.

LISTED UNDER: Brushless DC Motors

What’s Happening With Pumps and Valves

May 3, 2005 7:55 am | Product Releases | Comments

Figure 1. New peristaltic pump roller designs with a convex roller and concave tubing bed allow pumping media containing live cells with much less damage to the cells. The tube is squeezed in the middle first while the edges remain open, so the cells escape shearing or crushing.

LISTED UNDER: Other | Compressor | Diaphragm Pump

Keylock Switches (1903)

April 1, 2005 6:01 am | Eao Corporation | Product Releases | Comments

A range of keylock switches provide protection against unauthorized access and offer higher levels of safety control. They are constructed from high quality materials and tested rigorously to meet many international standards.

LISTED UNDER: Switches/Pushbuttons

Thermal Switch

April 1, 2005 6:01 am | Amperite Co. | Product Releases | Comments

The TSW and TSW2 models provide a simple means to monitor a single temperature. Thermal specifications range from 0&#176C to 150&#176C for the TSW and -40&#176C to 125&#176C for the TSW2. The TSW3 monitors a custom-specified temperature range or window from -40&#176C to 125°C.

LISTED UNDER: Switches/Pushbuttons

Actuator (1893)

April 1, 2005 6:01 am | Thk America, Inc. | Product Releases | Comments

The Type VLA Actuator has fewer components and a lower overall cost by using an LM Guide for its base. Long-term cost savings are also realized through the Type VLA’s incorporation of patented Caged Technology, a QZ Lubricator, and electro-mechanical components.

LISTED UNDER: Actuators | Cylinders

Linear Guide System

April 1, 2005 6:01 am | Bosch Rexroth Corporation | Product Releases | Comments

The high-precision Ball Rail System greatly reduces rolling, pitching, yawing deviations in linear guideways due to ball recirculation. The result is extremely smooth motion with virtually no deviation in the X, Y, or Z direction.

LISTED UNDER: Linear Motion Systems

Motor Feedback System

April 1, 2005 6:01 am | Stegmann, Inc. | Product Releases | Comments

The SKS 36 SinCos Motor Feedback System with Hiperface interface is more than a small version of a conventional rotary encoder. Its construction is fundamentally different, with a minimum number of components to open the door to the production of truly miniaturized rotary encoders.

LISTED UNDER: Encoders

Ball Nut

April 1, 2005 6:01 am | Steinmeyer, Inc. | Product Releases | Comments

By incorporating spacers between the balls and plastic tubes in the recirculating channels, this company has succeeded in producing a ball nut&#151the UltraSpeed KES&#151specifically designed for applications demanding high speed capability as well as consistent pulsation-free motion at slow speeds.

LISTED UNDER: Ball and Lead Screws

Vacuum Motor

April 1, 2005 6:01 am | Lin Engineering | Product Releases | Comments

The Nema size 11, 1.8 degree 211 vacuum rated series motors measure 1.1 in. square and are available in three lengths: the 211-13 is 1.24 in, the 211-18 is 1.75 in., and the 211-20 is 1.99 in. The 211-13 products 9.2 oz-in. of holding torque, the 211-18 produces 13.7 oz-in.

LISTED UNDER: Pneumatic Motors

Brushless DC Motor (1855)

April 1, 2005 5:33 am | Product Releases | Comments

The 000-0358 high performance brushless DC frameless motor is designed for low voltage applications where a high acceleration, high torque motor is required at low speeds. At 48 volts, this motor operates at 200 rpm and comfortably delivers 600 oz-in. of torque with an efficiency of 80 percent.

LISTED UNDER: Brushless DC Motors

Customized Mechatronic Solutions

April 1, 2005 5:33 am | Skf Usa Inc. | Product Releases | Comments

Integrated component designs and systems for medical applications enable precise, reliable, and quiet operation and performance of equipment and devices, including those specified for use in demanding cleanroom and vacuum settings.

LISTED UNDER: Linear Motion Systems | Actuators | Actuators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading