Advertisement

Driver/Controller

December 6, 2004 7:30 am | Rms Technologies, Inc. | Product Releases | Comments

The R101 is a bipolar driver/controller capable of output current ranging from 0.2 to 2.5 amps/phase with step resolutions from full, 1/2, 1/4, and 1/8. This product can be configured and controlled via a simple RS485 communications bus or step and direction inputs.

LISTED UNDER: Drives

Cartridge System

December 6, 2004 7:30 am | Tah Industries, Inc. | Product Releases | Comments

This closed end cartridge system offers good quality at a significant cost savings. The complete system provides a lower cost, based on the reduced number of components to buy, and the elimination of labor to assemble them.

LISTED UNDER: Cylinders

Controller Module

December 6, 2004 7:30 am | Product Releases | Comments

Nservo complements the Automation 3200 “soft” controller’s network digital drives (Ndrive, NLdrive, NCdrive, and Npaq), allowing any industry standard analog transconductance amplifier (voltage command, current output) to interface to Aerotech's digital drive network.

LISTED UNDER: DC Servo Motors
Advertisement

Wireless Footswitch

December 6, 2004 7:20 am | LINEMASTER Switch Corporation | Product Releases | Comments

This IR wireless footswitch eliminates the nuisance of wires under foot while invisible infrared light waves fill the room with 360 degrees of signal. Also, because it uses light rather than radio waves, it resists interference.

LISTED UNDER: Switches/Pushbuttons

Motion Solutions Catalog

November 3, 2004 9:24 am | Danaher Motion | Product Releases | Comments

The Portescap Motion Solutions catalog includes complete product features and benefits, specifications, and characteristics for the company’s entire family of Portescap-branded technologies.

LISTED UNDER: Brushless DC Motors | Actuators | Actuators

Rotary Encoder (1453)

November 2, 2004 6:42 am | Gurley Precision Instruments | Product Releases | Comments

The Model A37 mini encoder is a 12-bit single-turn absolute rotary encoder with opto-electronic technology. These encoders are used in a wide variety of poition-sensing applications for the measuring of angles and distances in relatively small envelopes.

LISTED UNDER: Encoders

Keylock Switches

November 2, 2004 6:07 am | Apem Components, Inc. | Product Releases | Comments

JD Series Keylock switches have a maximum current rating with resistive load of 4 amps at 125 VAC or 2 amps at 250 VAC. Expected life is 6,000 cycles at full load.

LISTED UNDER: Switches/Pushbuttons

Three Axis Controllers

November 2, 2004 6:07 am | Lin Engineering | Product Releases | Comments

The TMCM-303 and TMCM-310 Three Axis Controllers provide a complete motion control system at a low cost and that are conveniently compact in size. The 303 is a 1-3 axis stepper controller that has an ouput current of up to 1.5 Amps/phase and is capable of supporting 16x microstepping.

LISTED UNDER: Motor Speed Controllers
Advertisement

Stepper Motors (1419)

November 2, 2004 6:07 am | Product Releases | Comments

The MAE "S Series" hybrid stepper motors are optimized for maximum torque to promote smooth operation. These motors add value with microstepping capabilities ideal for applications requiring fine positioning.

LISTED UNDER: Step Motors

Exhaust Valve

November 2, 2004 6:01 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

The J-Series exhaust valve offers fast response time and high flow rates with its 1/8 in. and 1/4 in. ports. The all brass construction and 100% testing assures the highest level of quality.

LISTED UNDER: Other | Cylinders | Control

Fluid Control Valve

November 2, 2004 6:01 am | Product Releases | Comments

The Herion 97100 directional control air valve represents a cost effective solution for today's automated process industries. The 97100 series is compact in design and suitable for applications requiring high flow rates.

LISTED UNDER: Control | Cylinders | Control

Piston Pumps

November 2, 2004 6:01 am | Product Releases | Comments

Series 2770 WOB-L piston pumps offer long life, clean air flow, and field serviceability, making them excellent choices for a variety of medical, dental, HVAC, and other OEM applications.

LISTED UNDER: Piston | Cylinders | Flow

Lead Screws (1375)

October 15, 2004 8:20 am | Kerk Motion Products | Product Releases | Comments

Comprised of small diameter, precision rolled, lead screw assemblies, the Mini Series provides reliable precision motion control at up to 1/10th of the cost of miniature ball screws.

LISTED UNDER: Ball and Lead Screws

Precision Motion Solutions

October 15, 2004 8:17 am | Rockwell Automation, Anorad Brand | Product Releases | Comments

This 180-page catalog, titled "Anorad Precision Motion Solutions," showcases the company's entire line of precision positioning products.

LISTED UNDER: Linear Motion Systems

Motor Solutions

October 15, 2004 8:17 am | Maxon Precision Motors, Inc. | Product Releases | Comments

"Imagine" is a collection of motor and motion control solutions for a variety of industries. The presentation is provided by Maxon Precision Motors and illustrates its role in a variety of specific applications.

LISTED UNDER: Gear Motors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading