Advertisement

Pneumatic Cylinder

February 1, 2005 7:08 am | Product Releases | Comments

Booth 2016 The guided pneumatic cylinder (GPC) is equipped with two rigid guide rods supported by either slide bearings or ball bearings, which offer a high level of stability.

LISTED UNDER: Cylinders | Cylinders

Rotary Encoders (1721)

February 1, 2005 6:52 am | Product Releases | Comments

The Nemicon line consists of over 2,000 rotary encoders, ranging from miniature rotary encoders as small as 0.472 in. diameter up to 3.93 in. diameter models. These encoders achieve high resolution, high noise immunity, and high reliability all at a low price.

LISTED UNDER: Encoders

MDT Exclusive: Illuminated Pushbuttons

February 1, 2005 6:52 am | Product Releases | Comments

These illuminated pushbutton switches offer environmentally friendly components and packaging materials that meet the RoHS Directive restricting the use of hazardous materials. They are suited for lead-free soldering because of the heat resistant resin materials used.

LISTED UNDER: Switches/Pushbuttons
Advertisement

Flow Control Valves

January 6, 2005 10:36 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

The JFC-4 and JFC-5 combination needle and check valve flow controls are typically used to control air flow from air cylinders, thereby controlling the speed at which the piston strokes, either while extending or retracting, depending on their location in the circuit.

LISTED UNDER: Flow | Cylinders | Control

Brushless DC Motor (1699)

January 6, 2005 10:36 am | Product Releases | Comments

This extremely responsive compact brushless DC motor features a high torque to size ratio. Its mechanical time constant is 1.43 milliseconds, and its electrical time constant is 0.15 milliseconds, making it ideal for systems that require quick response.

LISTED UNDER: Brushless DC Motors

Miniature Guideways

January 6, 2005 10:36 am | Schneeberger, Inc. | Product Releases | Comments

The MINIRAIL line of precision linear guideways&#151available in four standard sizes: 7, 9, 12, and 15&#151is now available in four additional sizes of 14, 18, 24, and 42 in a wide version. Two accuracy grades and two preload categories are available.

LISTED UNDER: Linear Motion Systems

Controller Module (1693)

January 6, 2005 10:36 am | Product Releases | Comments

Booth 221 Nservo complements the Automation 3200 “soft” controller’s network digital drives (Ndrive, NLdrive, NCdrive, and Npaq), allowing any industry standard analog transconductance amplifier (voltage command, current output) to interface to Aerotech's digital drive network.

LISTED UNDER: DC Servo Motors

Assembly System

January 6, 2005 10:36 am | Schmidt Technology Corp. | Product Releases | Comments

Booth 219 Similar to the company’s four larger ServoPress assembly systems that feature 100% in-process control and monitoring, Model 405/4000 offers 180 lbs. peak load, up to 5.9 inches of ram stroke, and maximum ram speed of 11.8 inch/second.

LISTED UNDER: Presses | Actuators | Actuators
Advertisement

Motion Control Components

January 6, 2005 9:30 am | Product Releases | Comments

Copley Controls, Canton, MA, has a motion control components selection guide for designers of medical instrumentation. It summarizes the specifications and features of servo and stepper drive amplifiers, linear motors and actuators, and motion control software. Download: www.copleycontrols.

LISTED UNDER: Drives | Actuators | Actuators

Linear Modules/Robots

January 6, 2005 9:30 am | Product Releases | Comments

Bosch Rexroth’s Linear Motion and Assembly Technologies business unit in Charlotte, NC, is offering a brochure detailing its linear modules and Cartesian robots for precision motion solutions. Download: www.boschrexroth-us.com.

LISTED UNDER: Linear Motion Systems

Motors/Motion Control Catalog

January 6, 2005 9:30 am | Maxon Precision Motors, Inc. | Product Releases | Comments

A new catalog from Maxon, Burlingame, CA, offers product specifications and drawings on DC motors, brushless motors, control electronics, and drive components. Included with the printed manual is a CD-ROM containing an interactive catalog as well as a selection program.

LISTED UNDER: DC Servo Motors

Step Motor

January 5, 2005 9:06 am | Lin Engineering | Product Releases | Comments

This 2-phase hybrid stepper, the 208, is a 1.8 degree bipolar Nema 8 miniature step motor, intended for applications where space is limited. The motor measures only 0.79 in. square and is available in two stack sizes&#1511.30 in. and 1.69 in. in length. Although it weighs only 0.13 lbs.

LISTED UNDER: Step Motors

Electronic Components

December 8, 2004 10:45 am | Product Releases | Comments

The Allied Electronics Product Catalog contains reference data and purchasing information for

LISTED UNDER: Switches/Pushbuttons

DC Drive

December 6, 2004 7:30 am | Micromo | Product Releases | Comments

The 2232, a part of the SR Series, is a powerful drive with integrated encoder. The motor, featuring a diameter of 22 mm, a length of 32 mm and an NdFeB magnet, boasts an exceptionally high constant torque of 10 mNm.

LISTED UNDER: Drives

Motor Controllers

December 6, 2004 7:30 am | Performance Motion Devices, Inc. | Product Releases | Comments

The MC73110 Brushless Motor Control IC Developer's Kit allows designers to evaluate and use PMD's motor control Ics while shortening the design time for engineers who are interested in building high-performance brushless DC motor controllers.

LISTED UNDER: Motor Speed Controllers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading