Advertisement

Vacuum Motor

April 1, 2005 6:01 am | Lin Engineering | Product Releases | Comments

The Nema size 11, 1.8 degree 211 vacuum rated series motors measure 1.1 in. square and are available in three lengths: the 211-13 is 1.24 in, the 211-18 is 1.75 in., and the 211-20 is 1.99 in. The 211-13 products 9.2 oz-in. of holding torque, the 211-18 produces 13.7 oz-in.

LISTED UNDER: Pneumatic Motors

Customized Mechatronic Solutions

April 1, 2005 5:33 am | Product Releases | Comments

Integrated component designs and systems for medical applications enable precise, reliable, and quiet operation and performance of equipment and devices, including those specified for use in demanding cleanroom and vacuum settings.

LISTED UNDER: Linear Motion Systems | Actuators | Actuators

Magnetic Absolute Encoder

April 1, 2005 5:33 am | Product Releases | Comments

The MagRes magnetic absolute encoder line is specifically designed for medical equipment and devices requiring extremely precise direction and position monitoring.

LISTED UNDER: Encoders
Advertisement

Brushless DC Motor (1855)

April 1, 2005 5:33 am | Product Releases | Comments

The 000-0358 high performance brushless DC frameless motor is designed for low voltage applications where a high acceleration, high torque motor is required at low speeds. At 48 volts, this motor operates at 200 rpm and comfortably delivers 600 oz-in. of torque with an efficiency of 80 percent.

LISTED UNDER: Brushless DC Motors

Stainless Steel Interfaces

February 28, 2005 8:49 am | Product Releases | Comments

When the environment demands, stainless steel switches, keypads, and keyboards offer protection of up to IP67 standards against water, heat, shock, and vibration. These durable products require minimal maintenance and ultimately deliver long-term value in regards to life-cycle cost benefits.

LISTED UNDER: Switches/Pushbuttons

Actuator (1823)

February 28, 2005 8:49 am | Product Releases | Comments

The Type VLA actuator has fewer components and a lower overall cost, by using a THK LM Guide for its base. Long-term cost savings are also realized through the Type VLA’s incorporation of patented caged technology, a QZ Lubricator, and electro-mechanical components.

LISTED UNDER: Actuators | Cylinders

Hollow Shaft Gearmotors

February 28, 2005 8:49 am | Product Releases | Comments

The hollow shaft designs of a line of gearmotors (right angle, AC, DC, and BLDC) optimize mountings&#151saving on assembly labor and reducing the number of component parts. The hollow output shaft can be connected directly to the driven load.

LISTED UNDER: Gear Motors

Linear Motor

February 28, 2005 8:08 am | Product Releases | Comments

The ServoTube linear motor’s patented magnetic design enables a high accuracy Hall position sensor to replace the delicate and expensive optical encoder. Eliminating the encoder removes the principal barrier to “universal” linear motor use and restores the motor’s intrinsic ruggedness.

LISTED UNDER: Linear Motors
Advertisement

DC Servo Motor

February 1, 2005 9:21 am | Product Releases | Comments

The e-TORQ Direct Drive Brushless DC Servo Motors employ a unique electromagnetic design to improve efficiency, minimize size, and maximize torque. The motors are ideal for OEMs where high torque, very compact design, enclosed construction, and economy are necessary.

LISTED UNDER: DC Servo Motors

Stepper Motors (1733)

February 1, 2005 7:08 am | Product Releases | Comments

Booth 2543 All three series of the latest MAE brand hybrid stepper motors can deliver accurate open loop control for high-performance positioning applications. MAE “Y Series” motors incorporate AlNiCo magnets and are well suited for high-speed operation.

LISTED UNDER: Step Motors

Pneumatic Cylinder

February 1, 2005 7:08 am | Product Releases | Comments

Booth 2016 The guided pneumatic cylinder (GPC) is equipped with two rigid guide rods supported by either slide bearings or ball bearings, which offer a high level of stability.

LISTED UNDER: Cylinders | Cylinders

MDT Exclusive: Illuminated Pushbuttons

February 1, 2005 6:52 am | Product Releases | Comments

These illuminated pushbutton switches offer environmentally friendly components and packaging materials that meet the RoHS Directive restricting the use of hazardous materials. They are suited for lead-free soldering because of the heat resistant resin materials used.

LISTED UNDER: Switches/Pushbuttons

Rotary Encoders (1721)

February 1, 2005 6:52 am | Product Releases | Comments

The Nemicon line consists of over 2,000 rotary encoders, ranging from miniature rotary encoders as small as 0.472 in. diameter up to 3.93 in. diameter models. These encoders achieve high resolution, high noise immunity, and high reliability all at a low price.

LISTED UNDER: Encoders

Miniature Guideways

January 6, 2005 10:36 am | Schneeberger, Inc. | Product Releases | Comments

The MINIRAIL line of precision linear guideways&#151available in four standard sizes: 7, 9, 12, and 15&#151is now available in four additional sizes of 14, 18, 24, and 42 in a wide version. Two accuracy grades and two preload categories are available.

LISTED UNDER: Linear Motion Systems

Flow Control Valves

January 6, 2005 10:36 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

The JFC-4 and JFC-5 combination needle and check valve flow controls are typically used to control air flow from air cylinders, thereby controlling the speed at which the piston strokes, either while extending or retracting, depending on their location in the circuit.

LISTED UNDER: Flow | Cylinders | Control

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading