Bearing Housings

September 3, 2004 5:50 am | Misumi Usa, Inc | Product Releases | Comments

A line of high-grade bearing housings are supplied in extremely wide sizes and material parameters with delivery in as little as one day. The maintenance-free, self-lubricating housings have excellent mechanical strength, stiffness, and dimensional stability.


Interlock Package

September 3, 2004 5:50 am | Product Releases | Comments

The EC Series Electrically Coded Interlock Switch and Control Unit consists of a uniquely coded actuator, a read head (switch), and a control unit capable of monitoring up to four switches for applications with up to four guard doors.

LISTED UNDER: Switches/Pushbuttons | Actuators | Actuators

Servo Amplifier

September 3, 2004 5:50 am | Copley Controls Corp. | Product Releases | Comments

Xenus high power servo amplifiers drive brush and brushless servo motors (to 7 hp), including modern linear motors. The amplifiers permit sinusoidal or trapezoidal motor commutation.

LISTED UNDER: Encoders | Power Supplies


September 3, 2004 5:50 am | Otto Controls | Product Releases | Comments

The HTW Series, Hall Effect Proportional Output Thumbwheel, is available with eight output

LISTED UNDER: Switches/Pushbuttons


September 3, 2004 5:50 am | Reell Precision Manufacturing Corp. | Product Releases | Comments

Compact electromechanical clutches provide consistent timing for rotary motion control where cost is critical. The EC5, EC15, EC20, and EC30 clutches are designed for dependable operation and low power consumption in a variety of OEM applications.

LISTED UNDER: Brakes and Clutches

Linear Guides (1119)

September 3, 2004 5:50 am | Danaher Motion | Product Releases | Comments

Available in ball or roller profile configurations, the next generation Thomson 500 Series features exceptional rail straightness, smoother, quieter operation through insert molded re-circulation paths, and simpler installation on joint-free rails up to six meters long.

LISTED UNDER: Linear Motion Systems


September 3, 2004 5:50 am | Nkk Switches | Product Releases | Comments

The ultra-miniature G series switches&#151PC mount toggles, rockers, and pushbuttons, all with matching indicators&#151feature the Sliding Twin Crossbar (STC) contact mechanism. This innovative design guarantees excellent logic level switching reliability.

LISTED UNDER: Switches/Pushbuttons

Linear Stage (1093)

September 3, 2004 5:50 am | Product Releases | Comments

The ATS125 is Aerotech's smallest hardcover, side-sealed linear stage. The integral brushless motor reduces the overall footprint of the stage enabling its deployment in space-constrained applications, while the hardcover provides protection from debris created in the manufacturing process.

LISTED UNDER: Linear Motion Systems

Stepping Motors

September 3, 2004 5:50 am | Oriental Motors Usa Corp. | Product Releases | Comments

This 1.97 in. sq. frame size PK25 series of miniature 2-phase stepping motors. The motors are available in lengths of 2.03 in. and 3.19 in. These motors produce holding torques of 119 oz-in. and 220 oz-in., respectively, in bipolar excitation mode. The PK256-02B develops running torques of 80 oz-in.


Load Cell/Transducer Indicator

September 3, 2004 5:50 am | Transducer Techniques, Inc. | Product Releases | Comments

This system is a combination of the TLL (Tension Load Cell) and the PHM-100 Portable Hand-Held Transducer Indicator. This system is suitable for a variety of industrial and OEM force measurement and weighing applications.

LISTED UNDER: Transducers | Transducers

Rocker Switch (1097)

September 3, 2004 5:50 am | E-Switch | Product Releases | Comments

The low-profile design of the 400B Series process sealed SMT rocker switch permits right-angle mounting along the edges of circuit boards.

LISTED UNDER: Switches/Pushbuttons

Rod Cylinder Slide

September 3, 2004 5:50 am | Tolomatic, Inc. | Product Releases | Comments

The RCS series of Rod Cylinder Slides includes a choice of linear ball and composite bearing models in 5 bore sizes from 20 mm to 50 mm. Stroke lengths for each size are available, off-the-shelf, in one-inch increments up to 12 inches.

LISTED UNDER: Slides | Cylinders

Brushless DC Motor

September 3, 2004 5:50 am | Product Releases | Comments

The 000-0222 brushless DC motor is designed for low voltage operation where economy and a standard NEMA 23 interface are requirements. Designed with an operating voltage of 12 volts, this motor is capable of delivering 25 oz-in continuously or in excess of 80 oz-in peak torque.

LISTED UNDER: Brushless DC Motors

Miniature Profile Stage

September 3, 2004 5:50 am | Product Releases | Comments

The LX80L is a high-performance linear servo motor stage designed to handle 24/7 production applications with rapid linear translation and precise positioning of smaller loads within very small work envelopes.

LISTED UNDER: Positioning Stages and Tables

Brushless DC Motors

September 3, 2004 5:50 am | Product Releases | Comments

PITTMAN&reg ELCOM SL&reg brushless DC servo motors feature a slotless stator design offering key performance advantages compared with conventional slotted technology.

LISTED UNDER: Brushless DC Motors


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.