Advertisement

Position Sensor

September 3, 2004 5:50 am | Balluff Inc. | Product Releases | Comments

The Micropulse ProSet4, designed for hydraulic cylinder position sensing, has four built-in programmable setpoint outputs for detection of end-of-stroke or any position in between.

LISTED UNDER: Sensors | Cylinders
Advertisement

Miniature Slide Switches

August 4, 2004 8:16 am | E-Switch | Product Releases | Comments

The EG1260 series of miniature slide switches features two optional SMT mounting configurations and three slide actuator sizes for a wide variety of printed circuit board applications. Designed with an electrical life of 10,000 cycles, the SPDT EG1260 series is rated at 0.

LISTED UNDER: Switches/Pushbuttons

Encoder Interface System

August 4, 2004 8:16 am | Heidenhain Corp. | Product Releases | Comments

EnDat 2.2 is an improved serial interface for quick-response drives. It is a digital bidirectional interface for encoders that is capable of outputting absolute position values, as well as requesting or updating information stored in an encoder.

LISTED UNDER: Encoders

Mounting System

August 4, 2004 8:16 am | Danaher Motion | Product Releases | Comments

The Thomson Piloted RediMount&#153 is an innovative mounting system that allows Thomson Slides to easily mount, horizontally, vertically, inclined, or inverted, to nearly any motor, with guaranteed alignment.

LISTED UNDER: Slides

Miniature Motors

August 4, 2004 8:16 am | Rockwell Automation, Anorad Brand | Product Releases | Comments

The LEU Series is an ironless core, brushless linear motor producing up to 26 lbs. of peak force with an overall width of just 18 mm. The LEU motors are offered in two coil heights: the LEU-15 (15 mm) and the LEU-30 (30 mm).

LISTED UNDER: Brushless DC Motors

AC Motor Speed Controller

August 4, 2004 8:16 am | Oriental Motors Usa Corp. | Product Releases | Comments

The ES01/ES02 series of compact AC motor speed controllers accepts input power of 110/115 volts (ES01) and 200/230 volts (ES02) to control AC motors and gearmotors over a wide speed range of 90 ~ 1,400 r/min and 90 ~ 1,600 r/min.

LISTED UNDER: Brakes and Clutches

Vector/Inverter Motors

August 4, 2004 8:16 am | Product Releases | Comments

Black Max&reg motors are designed for inverter or vector applications where a torque speed range of up to 1000:1 is required. They are available from 1/4 to 30 HP. Blue Max&reg 2000 vector-duty motors are available from 40 to 100 HP and are designed for inverter or vector applications.

LISTED UNDER: Other Motors

Motion Control Chips

August 4, 2004 8:16 am | Nippon Pulse America, Inc. | Product Releases | Comments

The PCL61x3 chips' intelligent design takes over the burdensome motion control workload from the CPU. They generate pulse and direction signals to create various motion provides for stepper and digital servo drivers. The PCL61x3 chips, 3.3V devices, offer output speeds up to 15 Mpps.

LISTED UNDER: Positioning Stages and Tables

DIP Rotaries

August 4, 2004 8:16 am | Nkk Switches | Product Releases | Comments

The DR series of DIP rotaries features highly visible legends and offers a choice of screwdriver, shaft, dial-adjusted, or knob actuators, with trouble-free code setting. Additionally, designers can specify arrow or dot indicators.

LISTED UNDER: Switches/Pushbuttons | Actuators | Actuators

Linear Stage

July 8, 2004 11:39 am | Product Releases | Comments

The LX80L is a high-performance linear servo motor stage designed to handle 24/7 production applications with rapid linear translation and precise positioning of smaller loads within very small work envelopes.

LISTED UNDER: Positioning Stages and Tables

Positioning Table

July 8, 2004 11:39 am | Danaher Motion | Product Releases | Comments

IDC DS4 Precision Positioning Tables offer precision performance, industrial durability, and maximum configuration flexibility at commercial-grade prices.

LISTED UNDER: Positioning Stages and Tables

Brushless Motor

July 8, 2004 11:39 am | Micromo | Product Releases | Comments

The Faulhaber 4490 brushless motor comes in both the original delta wound version and the new star wound version. The number "4490" means that the motor is 44 mm diameter by 90 mm long.

LISTED UNDER: Brushless DC Motors

Automation Systems

July 8, 2004 11:39 am | Product Releases | Comments

Automation Solutions for Electronic Manufacturing, Test and Inspection, and Data Storage brochure

LISTED UNDER: Assembly Equipment | Actuators | Actuators

Integrated Systems

July 8, 2004 11:39 am | Skf Usa Inc. | Product Releases | Comments

SKF&reg integrated component designs and systems for medical applications enable precise, reliable, and quiet operation and performance of equipment and devices, including those specified for use in demanding cleanroom and vacuum settings.

LISTED UNDER: Linear Motion Systems | Actuators | Actuators

Stepper Motors

July 8, 2004 11:39 am | Product Releases | Comments

MAE&#153 "Y Series" hybrid stepper motors are designed to deliver accurate open loop control for high-performance positioning applications. Their AlNiCo magnets make these motors ideal for high-speed operation.

LISTED UNDER: Step Motors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading