Advertisement

EMI/RFI Shielding Product Guide

February 19, 2015 11:09 am | by Tech-Etch, Inc. | Tech-Etch, Inc. | Product Releases | Comments

The EMI/RFI Shielding Product Guide from Tech-Etch describes and pictures shielding products in a useful side-by-side comparison format. The eight-page brochure compares mounting, composition, size range, effective compression range, type of seal, contact interface, and performance data for...

LISTED UNDER: Seals and Gaskets | EMI/RFI Shielding

Horizontal Connectors

February 17, 2015 3:31 pm | by AVX | AVX | Product Releases | Comments

AVX Corporation, a manufacturer of passive components and interconnect solutions, has introduced the lowest profile poke-home connector currently available on the market. Featuring its industry-proven 2mm dual beam, high spring-force, phosphor bronze poke-home contacts in a sleek 3.0mm pitch by...

LISTED UNDER: Connectors

Target Connectors

February 3, 2015 2:33 pm | by Mill-Max Mfg. Corp. | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max is excited to introduce a selection of new target connectors and pins. These components are used in place of SMT pads on a PCB as the mating surface for spring-loaded pins. The new series’ are offered in .100” (2,54 mm) and 2 mm grid connectors as well as new discrete pins for a wide range of applications...

LISTED UNDER: Connectors
Advertisement

Hermetic Feed-Thrus for Implantable Devices

January 20, 2015 11:21 am | by SOURIAU PA&E | Product Releases | Comments

SOURIAU PA&E has been manufacturing medical device components for 30+ years and in that time, the company has seen many common design parameters across both its implantable feed-thru and endoscope window product lines. The company's...

LISTED UNDER: Connectors

Microwave/RF Assembly Calculator

January 16, 2015 11:18 am | by W.L. Gore & Associates | W.L. Gore & Associates | Product Releases | Comments

W. L. Gore & Associates has introduced an online tool designed to complement the existing GORE Microwave/RF Assembly Builder. The new GORE Microwave/RF Assembly Calculator is used to calculate insertion loss, VSWR and other parameters of GORE Microwave/RF Assemblies for different cable types. The Calculator is particularly useful when the initial cable...

LISTED UNDER: Cable Assemblies

Burn-In Test Socket

January 15, 2015 12:20 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics recently introduced a new Stamped spring pin socket addressing burn-in test requirements for testing 74 lead QFN - CBT-QFN-7038. The contactor used in CBT-QFN-7038 socket is a stamped spring pin with 15 gram actuation force per ball and cycle life of 10,000+ insertions. The self inductance of the contactor is 0.98 nH, insertion loss < 1 dB at 10 GHz and capacitance 0.03pF....

LISTED UNDER: Sockets

30 GHz Bandwidth Socket for QFN34 Package

January 6, 2015 1:21 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics has recently introduced a new high performance elastomer socket for 0.4mm pitch QFN package. The SG-MLF-7084 socket is designed for a 6mmx4.5mm package size and operates at bandwidths up to 30 GHz with less than 1dB of insertion loss (GSSG configuration). The contact resistance is typically 20 milliohms per pin. Network analyzer reflection measurements for the G-S-S-G case...

LISTED UNDER: Sockets

Custom Tuned and Terminated Micro-coaxial Assemblies for Ultrasound Applications

December 18, 2014 6:18 pm | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects (“HSI”), a full service extruder and manufacturer of high performance coaxial cable and assemblies, has recently announced custom, fine-wire and fine-pitch diagnostic imaging assemblies for medical device OEMs producing next-generation ultrasound equipment. HSI’s proprietary extrusion capabilities produce fine-wire coaxial cables...

LISTED UNDER: Cable Assemblies
Advertisement

RF & Microwave Filters

December 11, 2014 9:41 pm | by TTE Filters (an affiliate of Gowanda Holdings) | Product Releases | Comments

TTE’s new LC9S is a high-quality filter series offered from inventory with competitive pricing and same day shipment for communication and signal processing applications. The 9-pole filters in the LC9S Series deliver fast roll-off, an insertion loss of 1.0dB maximum and 50 Ohm terminations. Nine part numbers are available, each at a specific -1dBc passband frequency, from 30 MHz to 3 GHz. T...

LISTED UNDER: EMI/RFI Filters

Industrial Ethernet Connectivity Solutions

December 9, 2014 3:23 pm | by Mencom Corporation | Mencom Corporation | Product Releases | Comments

Industrial network systems allow for real-time distributed control of many connection points from a single controller. These “network bus” systems reduce the total amount of cable required and can simplify the overall design. Mencom offers a broad range of industrial network connectivity products to streamline your installation. Industrial Ethernet Cordsets Using Ethernet in industrial appl...

LISTED UNDER: Connectors | Cordsets/Power Cords | Ethernet/Internet Connectivity Devices

Bundled Cable Assemblies for Hirose, IPEX, and JAE Connectors

November 19, 2014 10:35 am | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects has recently announced the capability to create endless bundled coaxial cable constructions which exceed today’s complex interconnect requirements. HSI’s micro coaxial cable capabilities range from 32-48 AWG and can be bundled into high-density cable constructions in excess of 1,500 conductors, while preserving important electrical characteristics such as impedance, ...

LISTED UNDER: Cable Assemblies

Custom Connector Configurator and Savings Calculator

November 18, 2014 3:43 pm | by Harting, Inc. | HARTING North America | Product Releases | Comments

The free HARTING iPad App includes a slick and interactive Custom Connector Configurator AND Savings Calculator. The new app makes designing a modular connector a fast, simple task that can be performed in the field or in the office. The savings calculator does all the math - and demonstrates cost calculations for hardwired termination versus modular connectivity with HARTING trademark...

LISTED UNDER: Connectors

Fast and Reliable Sensor Connectors

November 6, 2014 3:25 pm | by Mencom Corporation | Product Releases | Comments

Mencom's quick disconnect sensor connectors and cabling offers fast and reliable solutions for the connectivity between the sensors and the control panel. Our sensor cables are over-molded with a variety of outer jacket material with or without shielding to provide the next line of defense for harsh applications. Armored cables for enhanced protection are available...

LISTED UNDER: Wire and Cable | Others

Custom Interventional Catheter Assemblies

November 3, 2014 4:30 pm | by MDT Staff | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects has recently announced the capability to create custom, micro-miniature interventional catheter assemblies with fine wire, direct-to-board terminations down to 0.175 mm pitch. This enhanced capability provides medical device companies seeking less invasive and more stable solutions the opportunity to further reduce the size of their catheterization products. With app...

LISTED UNDER: Cable Assemblies

Medical Electronic Solutions at MD&M Minneapolis

October 30, 2014 12:20 am | by MDT Staff | Molex | Product Releases | Comments

Molex To Showcase Expanding Medical Portfolio At MD&M Minneapolis 2014 Booth 1518 spotlights pioneering technologies for groundbreaking healthcare devices LISLE, IL – October 29, 2014 – Molex Incorporated will showcase a comprehensive medical product portfolio at the upcoming Medical Design & Manufacturing (MD&M) Minneapolis Conference being held October 29-30. Molex electronic solut...

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading