Advertisement

Auto-Lock™

December 5, 2013 3:11 pm | Quail Electronics, Inc. | Products

The Auto-Lock™ is an internal retention mechanism that actually hooks to the pins of power supply inlets and resists any axial force unless the mechanism is released! Tremendous amounts of force can't get the electrical connector to budge, but as soon as the IEC Auto-Lock™ mechanism is manually deactivated, the connector slips easily out of the inlet. With a unique patented locking mechanism on the connector side, fastening and unlocking your cord is just one pull away. After inserting the connector end into your device, it is safely secure. Try to pull on the cord and you won't be able to disconnect it. When you want to remove the cord, simply pull simultaneously on the red sliding tabs.

LISTED UNDER: Connectors | Cordsets/Power Cords | Plugs and Receptacles
Advertisement

Lighted Hospital Grade Power Cord

December 5, 2013 2:51 pm | Quail Electronics, Inc. | Products

Using the standard configuration of the NEMA 5-15P Hospital Grade Green Dot Plug, we created a new mold of the plug incorporating an LED inside. When the cord is plugged into a source of power, the Nema 5-15P Hospital Grade Green Dot plug will light up. This new feature will provide a unique tool for companies conscious about the connection of their devices End-users will appreciate being able to confirm power connectivity simply by a visual check. Choosing the Lighted Hospital Grade Power Cord will give your medical device the signature touch of the insightful designer. Green Dot Approved UL and CUL Approved

LISTED UNDER: Connectors | Cordsets/Power Cords | Plugs and Receptacles

High-Reliability Low-Voiding Flux Coating for Solder Preforms

November 21, 2013 5:13 pm | by MDT Staff | Product Releases | Comments

Indium Corporation introduced a new, high-reliability, low-voiding flux coating for solder preforms.

LISTED UNDER: Electrical Contacts | Wiring and Accessories

Highly Flexible Thermocouple Cables and Assemblies

November 19, 2013 2:32 pm | by MDT Staff | Cicoil Corporation | Product Releases | Comments

Cicoil announced the introduction of its Highly Flexible Thermocouple Cables. Unlike traditional Thermocouple cables, the Cicoil version has been designed for continuous motion, tight routing, excessive temperatures (-65°C to +260°C) and extremely harsh environments.

LISTED UNDER: Cable Assemblies

Carrying Accessories for Portable Enclosures

November 18, 2013 3:05 pm | by MDT Staff | Okw Enclosures, Inc. | Product Releases | Comments

OKW has added a unique range of accessories for its CARRYTEC range of portable enclosures which are really useful for portable instruments and test equipment.

LISTED UNDER: Enclosures/Chassis

Fine Pitch SMT Gull Wing Connector Series

November 15, 2013 4:54 pm | by MDT Staff | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max Mfg. Corp. announced the availability of its new fine pitch SMT gull wing connector series.

LISTED UNDER: Connectors

Power Entry Module Offers New Seal Kit

November 12, 2013 2:30 pm | by MDT Staff | Schurter, Inc. | Product Releases | Comments

SCHURTER now offers added seal protection to its successful 5707 series power entry module.

LISTED UNDER: Plugs and Receptacles

New Edge Card Socket Combines High Density with Lower Cost

October 29, 2013 11:20 am | by MDT Staff | Samtec, Inc. | Product Releases | Comments

Samtec’s line of high-speed edge card solutions now includes a new high-density edge card socket (BEC5C Series) featuring up to 140 total contacts on 0,50 mm pitch.

LISTED UNDER: Connectors

Direct Board Interconnect Technology Capabilities

October 24, 2013 3:57 pm | by MDT Staff | Autosplice, Inc. | Product Releases | Comments

Autosplice has expanded its industry-leading Direct Board Interconnect Technology (DBiT) capabilities to encompass a widening range of application requirements.

LISTED UNDER: Connectors

Stylish 19” Instrument Enclosures for 3U Equipment

October 16, 2013 12:26 pm | by MDT Staff | Product Releases | Comments

Instrumet is the latest range of 19” instrument enclosures from Metcase. These stylish, versatile and light weight cases conform to DIN 41494 and IEC 297-1 standards for 19” equipment.

LISTED UNDER: Enclosures/Chassis

Extended Range of RFI/EMI SMD Spring Contacts

October 15, 2013 5:25 pm | by MDT Staff | Harwin, Inc. | Product Releases | Comments

Harwin has expanded its range of EZ-Spring Contacts with different contact styles and heights. Part of the EZ-BoardWare range of PCB hardware products,  the surface mount Spring Contacts - also known as Spring Fingers or Grounding Contacts – are now available in 15 different sizes, ranging from 1.7mm to 7.25mm free height (1.20mm to 6.35mm minimum working height), and are suitable for both vertical and horizontal contact actions.

LISTED UNDER: Electrical Contacts

Power Entry Module Offers New Seal Kit

October 11, 2013 3:08 pm | by MDT Staff | Schurter, Inc. | Product Releases | Comments

Schurter now offers added seal protection to its successful 5707 series power entry module. A new seal kit provides an IP54 rating between the inlet and cord connector, preventing dust or splashing water from entering between them, when the equipment is plugged in.

LISTED UNDER: Plugs and Receptacles

Hospital Grade V-Lock Cordsets

October 9, 2013 8:58 pm | by MDT Staff | Schurter, Inc. | Product Releases | Comments

Schurter V-Lock power cords especially for the medical environment include two types designed to ensure patient safety in critical medical and dental applications. The plug end of the cordset is stamped with a green dot, indicating that it meets the rigors of UL 817 testing.

LISTED UNDER: Cordsets/Power Cords

Internal Retention Mechanism Goes International

October 3, 2013 1:48 pm | by MDT Staff | Quail Electronics, Inc. | Product Releases | Comments

With the amazing success of the IEC Auto-Lock Quail decided to take it international. The Auto-Lock is now offered in many different plug configurations all over the world and still has all the same great features.

LISTED UNDER: Cordsets/Power Cords

Testing of USB 3.0, HDMI Cables, and Coaxial Cables

October 2, 2013 7:33 pm | by MDT Staff | Teseq | Product Releases | Comments

Teseq has expanded its extensive line of over 60 CDNs (coupling/decoupling networks) for EMC RF conducted immunity testing, according to IEC/EN 61000-4-6, with several new models.

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading