Advertisement

EMI Filter Plate Features Potting and Pin Protector

January 14, 2009 9:25 am | Product Releases | Comments

This EMI filter plate comes with special epoxy potting and a rubber pin protector for applications where rough handling or challenging environmental conditions are typical.

LISTED UNDER: EMI/RFI Filters

Bushings Protect Round and Flat Cables at Panel Entry Points

January 14, 2009 9:25 am | Product Releases | Comments

Designed to protect the lifeline of electric/electronic products by absorbing forces of pull, push, twist, and flex, RDD Pigtail Lockit strain relief bushings securely anchor, insulate, and protect cables at panel entry points.

LISTED UNDER: Cable Carriers

Wire Improves Cardiovascular Catheter Manufacturing

January 14, 2009 9:25 am | Applied Plastics Co. Inc. | Product Releases | Comments

This Teflon coated extrusion wire is fabricated using a proprietary etching process that eliminates flaking and permits over 25% elongation to keep the catheter's inside diameter clean. Supplied spooled or cut to length, this fine extrusion wire features a 0.

LISTED UNDER: Wire and Cable | Nitinol
Advertisement

E-Frame Open Access Chassis Accommodates 3U Backplanes

January 14, 2009 9:25 am | Elma Electronic | Product Releases | Comments

The E-frame has been available in heights for 6U backplanes and now accommodates 3U heights. The unit does not have side or back walls around the card cage area, providing easy access for test and development.

LISTED UNDER: Enclosures/Chassis

Enclosures Line Expanded

January 13, 2009 6:12 am | Okw Enclosures, Inc. | Product Releases | Comments

The DIATEC range of wall mounting enclosures has been expanded with two new models molded in lava (dark grey) ABS. The models are particularly suitable for wall or machine mounted applications.

LISTED UNDER: Enclosures/Chassis

Ethernet Controller Integrates Ethernet Switch into PLC

January 9, 2009 11:18 am | Wago Corporation | Product Releases | Comments

Integrated Ethernet switch functionality enables the 750-871 Ethernet TCP/IP 2-port programmable fieldbus controller to optimize networking capabilities while streamlining associated costs.

LISTED UNDER: Ethernet/Internet Connectivity Devices

M12 Socket Connectors Provided With Profibus Cable

December 5, 2008 7:04 am | Binder Usa | Product Releases | Comments

The M12 shielded panel-mounted male or female connector is pre-assembled for Profibus and Ethernet users. The receptacle is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles are available in front- or rear-mount design for mounting to control cabinets.

LISTED UNDER: Connectors | Wire and Cable

26 and 28 AWG Conductors Allow Smaller, More Flexible Cable

December 5, 2008 7:04 am | Alpha Wire | Product Releases | Comments

The Xtra-Guard family of performance cables has been expanded with 26 AWG and 28 AWG stranded conductors.

LISTED UNDER: Wire and Cable
Advertisement

Miniature Enclosures Provided With Wrist Strap

November 10, 2008 6:52 am | Okw Enclosures, Inc. | Product Releases | Comments

A range of Minitec miniature enclosures now includes wrist strap models. These highly attractive cases have been designed for small electronic devices that can be worn on the wrist.

LISTED UNDER: Enclosures/Chassis

Power Supply Meets RoHS, EISA Standards

November 10, 2008 6:52 am | Product Releases | Comments

The GT-81085 series of fixed blade wall plug-in power supplies are offered in Class II, double-enforced insulation mechanical configurations. The regulated output voltage is 5 to 13.5 V up to 15 W of continuous power.

LISTED UNDER: Plugs and Receptacles | Power Supplies

"Build-A-Solution" Helps Incorporate Optical Fiber

November 10, 2008 6:52 am | Product Releases | Comments

CeramOptec's newly redesigned website features the unique Build-A-System which helps customers find the right optical fiber for their design. A user-friendly, step-by-step process leads visitors through the specification process.

LISTED UNDER: Fiber Optics

Copper Cable Assemblies Are Alternative to Fiber Optic

November 10, 2008 6:52 am | W.L. Gore & Associates | Product Releases | Comments

The GORE SFP+ copper cable assemblies offer a more reliable, efficient, and economical alternative to fiber optic modules for transmitting 10 Gbps data at distances up to 25 meters.

LISTED UNDER: Cable Assemblies | Cable Assemblies

Contact Ensures Reliable Connections for Implantables

November 10, 2008 6:52 am | Bal Seal Engineering, Inc. | Product Releases | Comments

The Bal Conn contact, which consists of a canted-coil spring retained in a metal housing, ensures uniform, reliable mechanical and electrical contact between the battery and lead in implantable devices.

LISTED UNDER: Electrical Contacts

E-Commerce Site Offers Sensor Accessories/Support Products

October 9, 2008 6:05 am | Product Releases | Comments

BEI Industrial Encoders has launched an e-commerce web site dedicated to industrial sensor accessories and support products. These products will help users install, maintain, and retrofit a variety of industrial sensor applications and are all available for easy online purchase.

LISTED UNDER: Connectors | Cable Assemblies

Cable Assembly Provides Space Saving Solutions

October 9, 2008 6:05 am | Jae Electronics | Product Releases | Comments

The JF04 Series FFC cable assembly is designed for use with high-speed transmission signals, includng LVDS, TMDS, HDMI, and PCI Express. Featuring high density, flat flex cable, the JF04 provides space saving solutions for medical device products.

LISTED UNDER: Wire and Cable

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading