Biodegradable Hand Held Enclosures

August 29, 2013 4:57 pm | by MDT Staff | Product Releases | Comments

OKWs SOFT-CASE series of hand held enclosures is now available from stock molded in BIOGRADE bioplastic material. For most applications this bioplastic material can be used instead of the fossil plastics, such as ABS, which were used until now.

LISTED UNDER: Enclosures/Chassis

Wider Range of Mixed Technology, Hi-rel Connectors

August 29, 2013 3:04 pm | by MDT Staff | Product Releases | Comments

Harwin has broadened the range of its Datamate Mix-Tek mixed-technology connector series that is available as standard off-the-shelf products. Now horizontal and coax versions of the popular 2mm pitch hi-rel family are immediately available for designers, reducing design time.

LISTED UNDER: Connectors

Composite Clad Metal Wire Superior to Silver and Gold Plated Wire

August 8, 2013 9:38 pm | by MDT Staff | Product Releases | Comments

Precious metal clad gold wire and silver wire that offers superior form-ability, ductility, solderability, and design flexibility than plated wire for use in a wide range of electronic connectors and medical devices is available from Anomet Products Inc. of Shrewsbury, Massachusetts.

LISTED UNDER: Wire and Cable | Wiring and Accessories

Interference on the Call

August 7, 2013 5:51 pm | by MDT Staff | Product Releases | Comments

While the headline of this article may seem unusual to some, it’s a common problem we all deal with. On a daily basis, there are millions of electronic devices that operate in close proximity on a very narrow portion of the wireless communications spectrum that spans from 30Hz to 300GHz.


Electrical/Electronic Components

July 25, 2013 12:33 pm | Schurter, Inc. | Products

Medically related products from SCHURTER meet international electro-technical standards and beyond that offer selected properties specially tuned to medical technology such as: plug-retention safety, easy-to-clean designs without edges, long service life, reliability, safety, tight seals, hygiene, simple operation and a high level of functionality. These products can be used in most equipment without additional testing.

LISTED UNDER: Connectors | Cordsets/Power Cords | EMI/RFI Filters

Programmable, Multi-Step Rotary Cable Stripping Machine

July 18, 2013 12:00 pm | by MDT Staff | Product Releases | Comments

The CoaxStrip 5200 is a programmable, multi-step rotary cable stripping machine for stripping coaxial cables with outer diameters between 1.0 – 7.0 mm (.040 – .270”). Thanks to the universally designed blades, centralizers and clamping jaws, the full range of cables can be handled without making any mechanical adjustments.

LISTED UNDER: Wire and Cable | Wiring and Accessories | Strippers/Cutters

Mega Strip Machine in a Class of its Own

July 8, 2013 5:38 pm | by MDT Staff | Product Releases | Comments

The MegaStrip 9650 has introduced new technologies to the market at a favorable price. With its modular system architecture, modern technology and easy operation, the new MegaStrip 9650 is in a class of its own. The MegaStrip 9650 sets new standards for programmable cut and strip machines for processing...

LISTED UNDER: Wire and Cable | Wiring and Accessories | Strippers/Cutters

Circular Connectors Offer Both Micro and Nano Interconnects

July 2, 2013 5:29 pm | by MDT Staff | Omnetics Connector Corp. | Product Releases | Comments

Omnetics’ micro-circular and nano-circular connectors include custom cable designs for high quality signal and EMI protection. Designers find a significant advantage in size reduction and cable flexibility when using the Omnetics miniaturized circular connectors and cables.

LISTED UNDER: Connectors

2mm Shrouded Male Connectors

June 25, 2013 4:05 pm | by MDT Staff | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max has added 2mm pitch products to their family of shrouded male pin connectors for higher density applications.  Like our .100” pitch series, these connectors are effective where a robust, secure connection is demanded, such as frequently mated interconnects and blind mate situations.

LISTED UNDER: Connectors

Ultra-high-density Push-pull Interconnect Solutions

May 29, 2013 2:28 pm | by MDT Staff | Fischer Connectors, Inc. | Product Releases | Comments

The Fischer MiniMax from Fischer Connectors is a first-of-its kind rugged push-pull interconnect solution for today’s smaller devices. An all-in-one 20 signal (0.5A) and 4 power (5A) connector with a patents-pending 24 mixed contacts, the MiniMax boasts a durability of over 500 mating cycles.

LISTED UNDER: Connectors

Micro Extrusion Primary Wires

May 20, 2013 2:33 pm | by MDT Staff | Product Releases | Comments

Temp-Flex has announced its MediSpec micro extrusion primary wires, designed to meet tight tolerance requirements for invasive and implantable applications in the medical industry. The Temp-Flex MediSpec micro extrusion primary wires deliver optimal reliability down to 52 AWG in a wide range of biocompatible conductor materials.

LISTED UNDER: Wire and Cable


May 17, 2013 3:40 pm | Alpha Wire | Products

100% Recyclable mPPE jacket and insulation -50°C to 105°C temperature range RoHS and REACH Compliant Suitable for use in NFPA 79 applications Contains no PVC or phthalates 130 Standard Constructions available Up to 47% smaller than PVC Up to 65% lighter than PVC Up to 87% lower outgassing Capable of handling extreme temperatures 100% recyclable

LISTED UNDER: Wire and Cable

Right-Angle Spring-Loaded Connectors with Long Stroke Option

April 29, 2013 4:25 pm | by MDT Staff | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max has added a second version to their 829 series single-row, right-angle, spring-loaded connectors. The new connector, 829-22-0XX-20-002101, has an increased mid-stroke distance of .045” (.090” full stroke) –providing more flexibility and tolerance for your assembly.

LISTED UNDER: Connectors

Wire-to-Board Connector Features a Unique Double-Lock Design

April 25, 2013 5:09 pm | by MDT Staff | Product Releases | Comments

Hirose Electric has developed the DF61 Series, a low-profile double-locking wire-to-board connector with the capacity to handle up to 5 Amps and 350 Volts. The DF61 Series is a rugged, 2-position connector that features a unique “Swing Lock” design that utilizes a positive and friction lock together to deliver a cable pull force resistance of 10 N.

LISTED UNDER: Connectors

Battery Holders & Contacts

April 25, 2013 10:24 am | Memory Protection Devices, Inc. | Products

MPD offers the largest selection of battery holders, battery sockets, battery retainers, battery gliders and battery contacts. From micro stampings to large multi cell packs MPD's product line is sure to have it available as a standard product or as a custom production run. With many years of supplying to the medical community, MPD understand the special needs and requirements of the industry.

LISTED UNDER: Connectors | Cordsets/Power Cords | Electrical Contacts


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.