Advertisement
Packaging and Interconnects

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable
Advertisement

Clamshell BGA Socket with Heat Sink Lid

February 20, 2015 5:04 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics has recently introduced a new BGA socket design using high performance elastomer capable of 75GHz, very low inductance and wide temperature applications. The GT-BGA-2019 socket is designed for 25x25 mm package size and operates at bandwidths up to 75GHz with less than 1dB of insertion loss...

LISTED UNDER: Sockets

Drive Cable with Multi-Stranded Flexible Torque Shaft

February 19, 2015 3:11 pm | by ASAHI INTECC USA, INC. | ASAHI INTECC USA, INC. | Product Releases | Comments

Asahi Intecc now offers high speed rotation stainless steel miniature drive cables for medical device and industrial applications requiring diameters less than 1/3”. The Asahi Drive Cable is a multi-layer, multi-filar, stranded flexible shaft with high bi-directional torque transmission properties with minimal backlash or lag. The multi-stranded...

LISTED UNDER: Wire and Cable

EMI/RFI Shielding Product Guide

February 19, 2015 11:09 am | by Tech-Etch, Inc. | Tech-Etch, Inc. | Product Releases | Comments

The EMI/RFI Shielding Product Guide from Tech-Etch describes and pictures shielding products in a useful side-by-side comparison format. The eight-page brochure compares mounting, composition, size range, effective compression range, type of seal, contact interface, and performance data for all standard EMI shielding products. These include beryllium copper finger stock configured as alternate...

LISTED UNDER: Seals and Gaskets | EMI/RFI Shielding

Horizontal Connector

February 17, 2015 3:31 pm | by AVX | AVX | Product Releases | Comments

AVX Corporation, a manufacturer of passive components and interconnect solutions, has introduced the lowest profile poke-home connector currently available on the market. Featuring its industry-proven 2mm dual beam, high spring-force, phosphor bronze poke-home contacts in a sleek 3.0mm pitch by 2.5mm high SMT package...

LISTED UNDER: Connectors

Target Connectors

February 3, 2015 2:33 pm | by Mill-Max Mfg. Corp. | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max is excited to introduce a selection of new target connectors and pins. These components are used in place of SMT pads on a PCB as the mating surface for spring-loaded pins. The new series’ are offered in .100” (2,54 mm) and 2 mm grid connectors as well as new discrete pins for a wide range of applications...

LISTED UNDER: Connectors
Advertisement

Hermetic Feed-Thrus for Implantable Devices

January 20, 2015 11:21 am | by SOURIAU PA&E | Product Releases | Comments

SOURIAU PA&E has been manufacturing medical device components for 30+ years and in that time, the company has seen many common design parameters across both its implantable feed-thru and endoscope window product lines. The company's...

LISTED UNDER: Connectors

Microwave/RF Assembly Calculator

January 16, 2015 11:18 am | by W.L. Gore & Associates | W.L. Gore & Associates | Product Releases | Comments

W. L. Gore & Associates has introduced an online tool designed to complement the existing GORE Microwave/RF Assembly Builder. The new GORE Microwave/RF Assembly Calculator is used to calculate insertion loss, VSWR and other parameters of GORE Microwave/RF Assemblies for different cable types. The Calculator is particularly useful when the initial cable...

LISTED UNDER: Cable Assemblies

Burn-In Test Socket

January 15, 2015 12:20 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics recently introduced a new Stamped spring pin socket addressing burn-in test requirements for testing 74 lead QFN - CBT-QFN-7038. The contactor used in CBT-QFN-7038 socket is a stamped spring pin with 15 gram actuation force per ball and cycle life of 10,000+ insertions. The self inductance of the contactor is 0.98 nH, insertion loss < 1 dB at 10 GHz and capacitance 0.03pF....

LISTED UNDER: Sockets

30 GHz Bandwidth Socket for QFN34 Package

January 6, 2015 1:21 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics has recently introduced a new high performance elastomer socket for 0.4mm pitch QFN package. The SG-MLF-7084 socket is designed for a 6mmx4.5mm package size and operates at bandwidths up to 30 GHz with less than 1dB of insertion loss (GSSG configuration). The contact resistance is typically 20 milliohms per pin. Network analyzer reflection measurements for the G-S-S-G case...

LISTED UNDER: Sockets

Custom Tuned and Terminated Micro-coaxial Assemblies for Ultrasound Applications

December 18, 2014 6:18 pm | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects (“HSI”), a full service extruder and manufacturer of high performance coaxial cable and assemblies, has recently announced custom, fine-wire and fine-pitch diagnostic imaging assemblies for medical device OEMs producing next-generation ultrasound equipment. HSI’s proprietary extrusion capabilities produce fine-wire coaxial cables...

LISTED UNDER: Cable Assemblies

RF & Microwave Filters

December 11, 2014 9:41 pm | by TTE Filters (an affiliate of Gowanda Holdings) | Product Releases | Comments

TTE’s new LC9S is a high-quality filter series offered from inventory with competitive pricing and same day shipment for communication and signal processing applications. The 9-pole filters in the LC9S Series deliver fast roll-off, an insertion loss of 1.0dB maximum and 50 Ohm terminations. Nine part numbers are available, each at a specific -1dBc passband frequency, from 30 MHz to 3 GHz. T...

LISTED UNDER: EMI/RFI Filters

Industrial Ethernet Connectivity Solutions

December 9, 2014 3:23 pm | by Mencom Corporation | Mencom Corporation | Product Releases | Comments

Industrial network systems allow for real-time distributed control of many connection points from a single controller. These “network bus” systems reduce the total amount of cable required and can simplify the overall design. Mencom offers a broad range of industrial network connectivity products to streamline your installation. Industrial Ethernet Cordsets Using Ethernet in industrial appl...

LISTED UNDER: Connectors | Cordsets/Power Cords | Ethernet/Internet Connectivity Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading