Advertisement
Packaging and Interconnects

Custom Tuned and Terminated Micro-coaxial Assemblies for Ultrasound Applications

December 18, 2014 6:18 pm | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects (“HSI”), a full service extruder and manufacturer of high performance coaxial cable and assemblies, has recently announced custom, fine-wire and fine-pitch diagnostic imaging assemblies for medical device OEMs producing next-generation ultrasound equipment. HSI’s proprietary extrusion capabilities produce fine-wire coaxial cables...

LISTED UNDER: Cable Assemblies

RF & Microwave Filters

December 11, 2014 9:41 pm | by TTE Filters (an affiliate of Gowanda Holdings) | Product Releases | Comments

TTE’s new LC9S is a high-quality filter series offered from inventory with competitive pricing and same day shipment for communication and signal processing applications. The 9-pole filters in the LC9S Series deliver fast roll-off, an insertion loss of 1.0dB maximum and 50 Ohm terminations. Nine part numbers are available, each at a specific -1dBc passband frequency, from 30 MHz to 3 GHz. T...

LISTED UNDER: EMI/RFI Filters

Industrial Ethernet Connectivity Solutions

December 9, 2014 3:23 pm | by Mencom Corporation | Mencom Corporation | Product Releases | Comments

Industrial network systems allow for real-time distributed control of many connection points from a single controller. These “network bus” systems reduce the total amount of cable required and can simplify the overall design. Mencom offers a broad range of industrial network connectivity products to streamline your installation. Industrial Ethernet Cordsets Using Ethernet in industrial appl...

LISTED UNDER: Connectors | Cordsets/Power Cords | Ethernet/Internet Connectivity Devices
Advertisement

Bundled Cable Assemblies for Hirose, IPEX, and JAE Connectors

November 19, 2014 10:35 am | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects has recently announced the capability to create endless bundled coaxial cable constructions which exceed today’s complex interconnect requirements. HSI’s micro coaxial cable capabilities range from 32-48 AWG and can be bundled into high-density cable constructions in excess of 1,500 conductors, while preserving important electrical characteristics such as impedance, ...

LISTED UNDER: Cable Assemblies

Custom Connector Configurator and Savings Calculator

November 18, 2014 3:43 pm | by Harting, Inc. | HARTING North America | Product Releases | Comments

The free HARTING iPad App includes a slick and interactive Custom Connector Configurator AND Savings Calculator. The new app makes designing a modular connector a fast, simple task that can be performed in the field or in the office. The savings calculator does all the math - and demonstrates cost calculations for hardwired termination versus modular connectivity with HARTING trademark...

LISTED UNDER: Connectors

Fast and Reliable Sensor Connectors

November 6, 2014 3:25 pm | by Mencom Corporation | Product Releases | Comments

Mencom's quick disconnect sensor connectors and cabling offers fast and reliable solutions for the connectivity between the sensors and the control panel. Our sensor cables are over-molded with a variety of outer jacket material with or without shielding to provide the next line of defense for harsh applications. Armored cables for enhanced protection are available...

LISTED UNDER: Wire and Cable | Others

Custom Interventional Catheter Assemblies

November 3, 2014 4:30 pm | by MDT Staff | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects has recently announced the capability to create custom, micro-miniature interventional catheter assemblies with fine wire, direct-to-board terminations down to 0.175 mm pitch. This enhanced capability provides medical device companies seeking less invasive and more stable solutions the opportunity to further reduce the size of their catheterization products. With app...

LISTED UNDER: Cable Assemblies

Medical Electronic Solutions at MD&M Minneapolis

October 30, 2014 12:20 am | by MDT Staff | Molex | Product Releases | Comments

Molex To Showcase Expanding Medical Portfolio At MD&M Minneapolis 2014 Booth 1518 spotlights pioneering technologies for groundbreaking healthcare devices LISLE, IL – October 29, 2014 – Molex Incorporated will showcase a comprehensive medical product portfolio at the upcoming Medical Design & Manufacturing (MD&M) Minneapolis Conference being held October 29-30. Molex electronic solut...

LISTED UNDER: Connectors
Advertisement

Cable Assembly Integrated Solutions

October 29, 2014 7:20 pm | by MDT Staff | ODU-USA, Inc. | Product Releases | Comments

With its expansion into the US market, ODU-USA has the capability of supplying its cable assembly solutions and capabilities for medical and military applications worldwide. ODU’s exceptional engineering standards ensure the highest level of cable design and performance...

LISTED UNDER: Product R&D | Cable Assemblies | Wire and Cable

IP 68 Quick Fix Cable Glands

October 29, 2014 7:02 pm | by MDT Staff | Product Releases | Comments

New Quick Fix Cable Glands from OKW speed up installations and make it easier to work when access is difficult. Quick Fix Cable Glands have been designed to be fitted from the outside without the use of special tools. They will fit both OKW and non-OKW enclosures...

LISTED UNDER: Cable Carriers | Enclosures/Chassis | Wire and Cable

2mm Spring-Loaded Connectors

October 24, 2014 4:22 pm | by MDT Staff | Mill-Max Mfg. Corp. | Product Releases | Comments

Mill-Max is excited to introduce the addition of 2mm pitch spring-loaded connectors to our extensive line of spring-loaded products. As always, real estate is at a premium in electronic packaging with designers demanding tighter pitch interconnects that deliver high quality performance. These spring-loaded connectors (SLC’s) are an appealing option combining both durability and space saving...

LISTED UNDER: Connectors

DC Input EMC Filter

October 1, 2014 8:30 am | by MDT Staff | Product Releases | Comments

TDK Corporation announces the introduction of the DC input TDK-Lambda RDEN-048050 EMC filter to complement the existing R series of AC input EMC filters.  The RDEN-048050 filter can accept an input voltage of up to 76VDC, and is rated for currents...

LISTED UNDER: EMI/RFI Filters

Ready to Ship Circuit Board Shields

September 29, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Many electronics manufacturers are burdened with seemingly impossible time-to-market and material sourcing demands. To help alleviate this immense pressure, Leader Tech introduces a large selection of Quick Ship board level shields that are ready...

LISTED UNDER: EMI/RFI Shielding

Waterproof Line Filter

September 25, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Americor introduces a line filter with a new IEC 320/C14 appliance inlet waterproof to International Protection IP 54. Available in both general equipment & low leakage current medical environments. Excellent attenuation performance...

LISTED UNDER: Plugs and Receptacles

Combined Plastic/Aluminum Enclosures

September 8, 2014 8:30 am | by MDT Staff | Product Releases | Comments

OKW has launched its radical new SYNERGY electronic enclosures range – its first to feature both plastic and aluminum for added strength and versatility. SYNERGY is a range of 36 individual enclosures...

LISTED UNDER: Enclosures/Chassis

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading