Advertisement
Passive and Discrete Components

Metal Foil Current Sense Chip Resistors

September 23, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Stackpole's CSNL Series utilizes metal foil technology, which allows the CSNL to offer 1% tolerances and 50 ppm TCR in resistance values down to 0.5 milliohms. The CSNL Series offers sizes of ½ watt 1206, 1 watt 2010, and 2 watt 2512. The CSNL has excellent performance...

LISTED UNDER: Resistors

SMT thin film chip resistors deliver power ratings up to 6 W

July 31, 2014 1:53 pm | Product Releases | Comments

Vishay Intertechnology, Inc. introduced a new series of high-power, surface-mount precision thin film chip resistors. Built on aluminum nitride substrates, PCAN Series devices offer power ratings of 2 W and 6 W in compact 1206 and 2512 case sizes, respectively. The aluminum nitride substrates ...

LISTED UNDER: Electronic Components | Passive and Discrete Components | Resistors

New 2756 MHz Voltage Controlled Oscillator

July 28, 2014 12:43 am | by MDT Staff | Product Releases | Comments

Crystek's CVCO55CC-2756-2756 Voltage Controlled Oscillator (VCO) operates at 2756 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -116 dBc/Hz...

LISTED UNDER: Crystals/Oscillators/Piezoelectrics
Advertisement

RF Chip Inductors Offer Ceramic or Ferrite Cores

July 23, 2014 10:53 pm | by MDT Staff | Product Releases | Comments

Sumida Electronics has launched a new series of 0603-size wire-wound chip inductors, targeting the RF and communications markets. Because they are available with ceramic or ferrite core construction, an exceptionally wide range of inductance values are offered within the series...

LISTED UNDER: Inductors

Multilayer Ceramic Chip Inductors

July 21, 2014 6:15 pm | by MDT Staff | Product Releases | Comments

Pulse Electronics has extended its inductor product offerings with a new line of high frequency multilayer ceramic chip inductors. These RF ceramic inductors have low DC resistance, high Q values at higher frequencies, high self-resonant frequency, and high reliability...

LISTED UNDER: Inductors

Lower Voltage, High Performance 1.8 V Oscillator

July 21, 2014 1:24 am | by MDT Staff | Product Releases | Comments

Fox Electronics now offers a 1.8 V HCMOS XpressO-ULTRA oscillator. This latest line expansion provides lower power consumption without sacrificing performance. Designers can employ a compact 1.8 V ultra-precision oscillator that works at the same circuit level as modern chip sets...

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Current Sense Resistors Combine Low TCR Down to ±2ppm/°C with Power Ratings to 80W

July 14, 2014 9:56 am | by MDT Staff | Product Releases | Comments

VPG announced that its Powertron resistor brand has introduced the first seven devices in its S Series of precision foil current sense resistors. Offering a TCR of ±2 ppm/°C — said to be the industry's lowest for high-power current shunts — the SHR...

LISTED UNDER: Resistors

PiezoPaint(TM)

June 30, 2014 12:58 pm | Piezo Technologies | Products

Meggitt Piezo Technologies brings novel technology as an attractive alternative to bulk, weight, and complicated wiring with PiezoPaint(TM), a highly flexible piezoceramic material enabling direct deposition on a variety of materials, plastics, and polymers using available printing techniques, such as screen printing or pad printing. PiezoPaint(TM) is a solution that can provide you the volumetric structure for an array with high sensitivity at extremely low processing temperatures. Its flexibility of use and ultra-low weight can make PiezoPant(TM) an attractive solution for your emerging application in ultrasound or HiFU.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics | Flow | Probes
Advertisement

Chip Resistors are Impervious to Sulfur

June 24, 2014 11:25 pm | by MDT Staff | Product Releases | Comments

The RMCG Series from Stackpole provides a surface mount thick film chip resistor that is impervious to contamination by sulfur. The RMCG Series has inner terminations that are protected by...

LISTED UNDER: Resistors

High Voltage Resistors up to 7000 Volts

June 3, 2014 12:18 am | by MDT Staff | Product Releases | Comments

Stackpole has expanded and improved its MG Series thru hole metal glaze high voltage resistors. The value range for all sizes has been expanded to include values from 1K ohm up to 1G ohm. In addition, working voltages have been improved and now range from 1.6KV for the ¼ watt size to 7KV for the 2W and mini 3W sizes...

LISTED UNDER: Resistors

TCVCXO Delivers ±0.14ppm Stability

June 3, 2014 12:14 am | by MDT Staff | Product Releases | Comments

IQD’s new IQXT-210 series TCVCXO, offers frequency stabilities down to ±0.14ppm over the full industrial temperature range of -40 to 85 degrees C. This new model is approaching OCXO performance levels, whilst being packaged in a miniature 8-pad 5 x 3.2mm package...

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Pulse Withstanding Resistors

May 27, 2014 8:00 am | by MDT Staff | Product Releases | Comments

Stackpole’s RPC Series of pulse withstanding chip resistors utilizes thick film technology. This series is well known for its outstanding pulse handling for both repetitive and single high power pulses. The RPC Series now offers tolerances as tight...

LISTED UNDER: Resistors

Extended Capacitance Range and Voltage for X7R MLCCs

May 20, 2014 8:00 am | by MDT Staff | AVX | Product Releases | Comments

AVX Corporation, a leading manufacturer of passive components and interconnect solutions, has extended the capacitance range and voltage ratings for its X7R MLCCs, resulting in a much broader product offering with several new high volumetric...

LISTED UNDER: Capacitors

2.5/3.3V Oscillators

May 2, 2014 8:10 am | by MDT Staff | Product Releases | Comments

Fox Electronics, a leading global supplier of frequency control solutions and an IDT company, now offers an LVDS version, in addition to the recently released LVPECL version of its next generation ultra precision oscillator technology...

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Axial Lead Wirewound Resistors

April 21, 2014 9:21 am | by MDT Staff | Product Releases | Comments

Vishay Intertechnology, Inc. today introduced a new series of non-magnetic, non-inductive axial lead wirewound resistors with high power ratings to 12 W and high-temperature operation to +350 °C, which is ideal for high-end...

LISTED UNDER: Resistors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading