Advertisement

Capacitors Exhibit Lowest Dielectric Absorption

December 10, 2013 4:01 pm | by MDT Staff | Product Releases | Comments

AVX has published a new technical paper, “Dielectric Absorption of Multilayer Organic (MLO) Capacitors,” announcing that its MLO capacitors have been shown to exhibit the lowest dielectric absorption (DA) of any comparable technology, making them ideal for use in sample and hold (S/H) circuits.

LISTED UNDER: Capacitors
Advertisement

XpressO-Ultra Oscillators Offer Improved Phase Noise and Reduced Jitter

December 2, 2013 4:59 pm | by MDT Staff | Fox Electronics | Product Releases | Comments

Fox Electronics has released the next generation of XpressO technology, XpressO-Ultra.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Custom Crystal Filter Product Platform

November 21, 2013 4:58 pm | by MDT Staff | Product Releases | Comments

IQD has launched a new custom crystal filter product platform at the European Microwave Week 2013. The IQXF-1000 series are a range of band-pass filters with center frequencies from 1.4 to 200MHz based around fundamental and third overtone mode crystals.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Chip Resistors Handle High Voltage Pulses

November 20, 2013 2:56 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole has expanded its HVC Series of thick film high voltage resistors that utilize a state-of-the-art film deposition process to achieve high voltage ratings, high resistance values, and high pulse voltage handling up to 40KV.

LISTED UNDER: Resistors

High Voltage Dividers Provide Accuracy and Stability

November 20, 2013 2:43 pm | by MDT Staff | Tt Electronics | Product Releases | Comments

TT electronics is further extending its range of innovative solutions for challenging applications, with the introduction of three families of thick-film precision resistive dividers targeting high-voltage measurement circuits.

LISTED UNDER: Resistors

Fiber-Coupled, Multi-Bar Module Delivers Up to 6kW

November 7, 2013 3:43 pm | by MDT Staff | Product Releases | Comments

DILAS announced a fiber coupled, multi-bar diode laser module. This micro-channel-cooled unit is capable of delivering up to 6-kilowatt output at a wavelength mix of 9xxnm through a 1000µm, 0.22NA fiber. It combines multi-kW fiber-coupled diode laser power with a small footprint and high efficiency.

LISTED UNDER: Lasers | Diodes

Precision Current Sense Resistor

October 22, 2013 4:07 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole’s CSS precision current sense resistor series is ideal for high current applications because it offers very low resistance values. The 4 watt rated CSS2725 is available in resistance values down to 0.25 milliohms. This allows for its use in sensing currents above 50 amps with much less thermal energy dissipated. 

LISTED UNDER: Resistors

Conduction-Cooled, 200µm Fiber-Coupled Modules

September 26, 2013 4:07 pm | by MDT Staff | Dilas Diode Laser, Inc. | Product Releases | Comments

DILAS has expanded its conduction-cooled, fiber-coupled diode laser modules at 1470nm and 1530nm to include 200µm, NA0.22. With 12W output power, these fiber-coupled modules are ideal for the medical market primarily for surgical applications that demand high-power, stable sources with the smallest fiber diameters. 

LISTED UNDER: Lasers | Diodes

SMD Solution for Transient Suppression

September 18, 2013 3:26 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

The Stackpole PV Series is a plastic encapsulated surface mount transient voltage suppression solution for working voltages up to 300vrms. The PV Series offers two case sizes: 3225 and 4032, which have equivalent electrical parameters to leaded disc types of size 5 and 7 respectively.

LISTED UNDER: Resistors

High-temperature, Outgassing-compliant Power Inductors

September 11, 2013 4:33 pm | by MDT Staff | Coilcraft Critical Products And Services | Product Releases | Comments

Coilcraft CPS has announced its new AE619PYA Series of high-temperature, military-grade power inductors that meet all NASA low outgassing specifications. These robust, composite-core surface mount inductors are constructed of high-temperature materials to exceed the requirements of most military and aerospace applications...

LISTED UNDER: Inductors

Solid Tantalum Chip Capacitors for Non-Life-Support Medical Devices

September 10, 2013 3:42 pm | by MDT Staff | Vishay Intertechnology, Inc. | Product Releases | Comments

Vishay Intertechnology has introduced a new series of TANTAMOUNT surface-mount solid tantalum molded chip capacitors designed to provide improved performance and reliability in a wide variety of non-life-support medical monitoring and diagnostic instruments for in-home and hospital use.

LISTED UNDER: Capacitors

HDM Series Moisture Resistant Carbon Film Resistors

August 28, 2013 3:38 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole’s HDM Series utilizes special materials, processing, and controls to achieve a level of moisture withstanding far better than comparable film resistors. The HDM Series remains stable after 1000 hours at 93% humidity and 1% bias.

LISTED UNDER: Resistors

Passivated Nichrome Resistors For High Humidity Applications

July 30, 2013 8:05 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole’s RNCS Series of precision resistors has a nichrome element that is passivated to protect it from corrosion due to humidity and moisture. The result is a precision resistor that performs as well as tantalum nitride based resistors at a much lower cost.

LISTED UNDER: Resistors

Fiber-Coupled, Single Emitter Module

July 10, 2013 5:24 pm | by MDT Staff | Dilas Diode Laser, Inc. | Product Releases | Comments

DILAS has introduced a fiber-coupled, single emitter module that emits 10W continuous wave (CW) power at 976nm from a single, 200 micron broad area emitter. Available in a high heat load (HHL) package, this easy-to-integrate, high-brightness, 976nm, multimode diode laser is ideal for medical applications.

LISTED UNDER: Diodes

TCXOs with Tighter Stabilities to ±1 ppm

June 28, 2013 4:23 pm | by MDT Staff | Fox Electronics | Product Releases | Comments

Fox Electronics is now offering its XpressO TCXO with tighter stabilities in custom frequencies up to 250 MHz. Available with ±1.5 ppm from -40°C to +85°C as well as down to ±1 ppm from 0°C to +70°C, the new XpressO-TC HCMOS TCXO oscillators can be delivered in ten working days or less.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading