Precision Current Sense Resistor

October 22, 2013 4:07 pm | by MDT Staff | Product Releases | Comments

Stackpole’s CSS precision current sense resistor series is ideal for high current applications because it offers very low resistance values. The 4 watt rated CSS2725 is available in resistance values down to 0.25 milliohms. This allows for its use in sensing currents above 50 amps with much less thermal energy dissipated. 


Conduction-Cooled, 200µm Fiber-Coupled Modules

September 26, 2013 4:07 pm | by MDT Staff | Dilas Diode Laser, Inc. | Product Releases | Comments

DILAS has expanded its conduction-cooled, fiber-coupled diode laser modules at 1470nm and 1530nm to include 200µm, NA0.22. With 12W output power, these fiber-coupled modules are ideal for the medical market primarily for surgical applications that demand high-power, stable sources with the smallest fiber diameters. 

LISTED UNDER: Lasers | Diodes

SMD Solution for Transient Suppression

September 18, 2013 3:26 pm | by MDT Staff | Product Releases | Comments

The Stackpole PV Series is a plastic encapsulated surface mount transient voltage suppression solution for working voltages up to 300vrms. The PV Series offers two case sizes: 3225 and 4032, which have equivalent electrical parameters to leaded disc types of size 5 and 7 respectively.


High-temperature, Outgassing-compliant Power Inductors

September 11, 2013 4:33 pm | by MDT Staff | Product Releases | Comments

Coilcraft CPS has announced its new AE619PYA Series of high-temperature, military-grade power inductors that meet all NASA low outgassing specifications. These robust, composite-core surface mount inductors are constructed of high-temperature materials to exceed the requirements of most military and aerospace applications...


Solid Tantalum Chip Capacitors for Non-Life-Support Medical Devices

September 10, 2013 3:42 pm | by MDT Staff | Product Releases | Comments

Vishay Intertechnology has introduced a new series of TANTAMOUNT surface-mount solid tantalum molded chip capacitors designed to provide improved performance and reliability in a wide variety of non-life-support medical monitoring and diagnostic instruments for in-home and hospital use.

LISTED UNDER: Capacitors

HDM Series Moisture Resistant Carbon Film Resistors

August 28, 2013 3:38 pm | by MDT Staff | Product Releases | Comments

Stackpole’s HDM Series utilizes special materials, processing, and controls to achieve a level of moisture withstanding far better than comparable film resistors. The HDM Series remains stable after 1000 hours at 93% humidity and 1% bias.


Passivated Nichrome Resistors For High Humidity Applications

July 30, 2013 8:05 pm | by MDT Staff | Product Releases | Comments

Stackpole’s RNCS Series of precision resistors has a nichrome element that is passivated to protect it from corrosion due to humidity and moisture. The result is a precision resistor that performs as well as tantalum nitride based resistors at a much lower cost.


Fiber-Coupled, Single Emitter Module

July 10, 2013 5:24 pm | by MDT Staff | Dilas Diode Laser, Inc. | Product Releases | Comments

DILAS has introduced a fiber-coupled, single emitter module that emits 10W continuous wave (CW) power at 976nm from a single, 200 micron broad area emitter. Available in a high heat load (HHL) package, this easy-to-integrate, high-brightness, 976nm, multimode diode laser is ideal for medical applications.


TCXOs with Tighter Stabilities to ±1 ppm

June 28, 2013 4:23 pm | by MDT Staff | Product Releases | Comments

Fox Electronics is now offering its XpressO TCXO with tighter stabilities in custom frequencies up to 250 MHz. Available with ±1.5 ppm from -40°C to +85°C as well as down to ±1 ppm from 0°C to +70°C, the new XpressO-TC HCMOS TCXO oscillators can be delivered in ten working days or less.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Multispectral Photodiodes at Sensors Expo

May 29, 2013 2:56 pm | by MDT Staff | Product Releases | Comments

Pixelteq will demonstrate its latest multispectral sensors and PixelSensor photodiodes at the Sensors Expo next month in Rosemont, Ill. Demonstrations at booth No. 629 will show how wavelength-selective photodiodes and multi-band imaging improve contrast and visualization for a variety of biomedical, industrial and scientific applications.


Spread Spectrum Crystal Oscillator (SSXO)

May 14, 2013 7:37 pm | Products

Quartz Crystal Frequency Control Clock Oscillator designed to Reduce EMI by an Average of -12dB as a Drop-In Replacement for Traditional Oscillators

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Smallest Non-Magnetic Inductor Ideal for Medical Imaging

May 14, 2013 4:11 pm | by MDT Staff | Gowanda Electronics Corp. | Product Releases | Comments

Gowanda Electronics announced the introduction of the world’s smallest non-magnetic molded RF inductor series, SMG1812. This new surface mount wire wound series will be featured at MD&M-East. The dimensions of the new SMG1812 are 4.8 mm (length) x 3.4 mm (width) x 3.5 mm (height).


DC-DC Converters

May 9, 2013 12:09 pm | Murata Power Solutions | Products

DC-DC converters, isolated and non-isolated, 1W to 300W+

LISTED UNDER: Capacitors | Inductors | Power Supplies

Carbon Comps Ideal for High Energy Load Dump Applications

May 7, 2013 4:32 pm | by MDT Staff | Product Releases | Comments

Stackpole’s RC series is an axial leaded carbon composition technology available in 1/4W, 1/2W, and 1W power ratings. The RC’s dense carbon slug element handles high-energy surges much better than metal film based surge resistors.

LISTED UNDER: Resistors | Carbon | Composites

Foil on Ceramic Carrier Current Sense Chip Resistors

April 30, 2013 4:35 pm | by MDT Staff | Product Releases | Comments

Stackpole announced the release of the CSRF0603 and CSRF0402 sizes to add to their broad current sense resistor product group. The CSRF0603 is available in resistance values from 5 to 10 milliohms in 1% tolerance and 75 ppm TCR.



You may login with either your assigned username or your e-mail address.
The password field is case sensitive.