Medical Design Technology

Passive and Discrete Components

Multispectral Photodiodes at Sensors Expo

May 29, 2013 2:56 pm | by MDT Staff | Product Releases | Comments

Pixelteq will demonstrate its latest multispectral sensors and PixelSensor photodiodes at the Sensors Expo next month in Rosemont, Ill. Demonstrations at booth No. 629 will show how wavelength-selective photodiodes and multi-band imaging improve contrast and visualization for a variety of biomedical, industrial and scientific applications.

LISTED UNDER: Diodes
Advertisement

Preparing for Medical Electronics RoHS Compliance

May 20, 2013 2:33 pm | by George Karalias, Director of Marketing & Communications, Rochester Electronics | Rochester Electronics | Blogs | Comments

Next July, certain medical electronics will fall under the scope of RoHS—the European Union’s Restriction on Hazardous Substances. In terms of the electronics industry, that is now a tight deadline for manufacturers. Medical devices that have so far been exempt from RoHS fall into scope under the RoHS Recast (RoHS 2) beginning in July 2014.

LISTED UNDER: Amplifiers | Flexible Circuits | Hybrid Circuits

Alumina Substrate and Medical Equipment Resistors

May 17, 2013 4:13 pm | by Michael West, Director of Engineering, Ohmite Manufacturing | Articles | Comments

This article will walk through the various characteristics of these resistors, including high resistance values, high voltage handling, small size, resiliency, and more, to demonstrate how they might aid in the design of medical devices.

LISTED UNDER: Resistors

Smallest Non-Magnetic Inductor Ideal for Medical Imaging

May 14, 2013 4:11 pm | by MDT Staff | Gowanda Electronics Corp. | Product Releases | Comments

Gowanda Electronics announced the introduction of the world’s smallest non-magnetic molded RF inductor series, SMG1812. This new surface mount wire wound series will be featured at MD&M-East. The dimensions of the new SMG1812 are 4.8 mm (length) x 3.4 mm (width) x 3.5 mm (height).

LISTED UNDER: Inductors

Carbon Comps Ideal for High Energy Load Dump Applications

May 7, 2013 4:32 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole’s RC series is an axial leaded carbon composition technology available in 1/4W, 1/2W, and 1W power ratings. The RC’s dense carbon slug element handles high-energy surges much better than metal film based surge resistors.

LISTED UNDER: Resistors | Carbon | Composites

Foil on Ceramic Carrier Current Sense Chip Resistors

April 30, 2013 4:35 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole announced the release of the CSRF0603 and CSRF0402 sizes to add to their broad current sense resistor product group. The CSRF0603 is available in resistance values from 5 to 10 milliohms in 1% tolerance and 75 ppm TCR.

LISTED UNDER: Resistors

RoHS Deadline Approaches for Medical Electronics

April 25, 2013 4:41 pm | by George Karalias, Director of Marketing & Communications, Rochester Electronics | Rochester Electronics | Blogs | Comments

Engineers and buyers in the medical device manufacturing industry should note the following date: July 22, 2014. That is the day medical electronics must comply with the EU’s Restriction on Hazardous Substances (RoHS) regulation. Medical devices have so far been exempt from RoHS, which requires the elimination of lead, cadmium, mercury, and other substances from electronics.

LISTED UNDER: Amplifiers | Flexible Circuits | Hybrid Circuits

DILAS Direct, Multi-Bar Diode Laser System

April 15, 2013 5:05 pm | by MDT Staff | Dilas Diode Laser, Inc. | Product Releases | Comments

DILAS, the diode laser company, announces a direct, multi-bar diode laser system. The DILAS SD3000 is capable of delivering up to 3-kilowatt output at 980nm wavelength to the work piece. The direct diode laser system, DILAS SD3000 is available either with symmetric spot configuration (SD3000S) or with different line focus configurations (SD3000L).

LISTED UNDER: Lasers | Diodes

New Osram Infrared Light Emitting Diode with Wide Beam Angle

April 15, 2013 4:01 pm | by MDT Staff | Osram Opto Semiconductors | Product Releases | Comments

The new infrared (IRED) Oslon black SFH 4716S from Osram Opto Semiconductors is one of the most powerful IREDs on the market, with an optical output of 1030 milliwatts (mW) and a beam angle of 150 degrees.

LISTED UNDER: Diodes | Optical

Non-Magnetic Chip Resistors for MRI Applications

March 25, 2013 10:59 am | by MDT Staff | International Manufacturing Services, Inc. | Product Releases | Comments

International Manufacturing Services, Inc. (IMS), a leading manufacturer of high quality thick film resistors, terminations, attenuators, couplers, thermal management devices, planar dividers and planar filters to the electronics industry, has introduced a new type or chip resistor terminal which are non-magnetic and ultra leach resistant.

LISTED UNDER: Resistors

Chip Resistors Offer Resistance Values Up To 10G Ohms

March 13, 2013 12:09 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

The HMC Series from Stackpole is a thick film based chip resistor series capable of high resistance values. This series utilizes special high resistance inks and volume production to achieve a chip resistor that is capable of extremely high resistance values without significant cost increase.

LISTED UNDER: Resistors

1/4-Watt High Voltage Metal Film Resistor

February 1, 2013 11:32 am | Stackpole Electronics, Inc. | Product Releases | Comments

The RNV14 from Stackpole is a ¼ watt high voltage metal film resistor which is able to withstand environments with high moisture. The high voltage metal film element has a maximum working voltage of 1600 volts DC, 1150 AC.

LISTED UNDER: Resistors

Low-Noise, Energy-Efficient Chokes for MRI Scanners

January 25, 2013 10:32 am | Product Releases | Comments

SMP Sintermetalle Prometheus (SMP) has developed chokes for use in Magnetic Resonance Imaging (MRI). These inductive components are exceptionally quiet in operation as well as being low-loss and energy-efficient.

LISTED UNDER: Inductors

SMD Components, PCB Boards, and Solder Training Kits

January 10, 2013 10:20 am | Product Releases | Comments

Practical Components and its sister company Practical Tools will showcase its latest tools and technology in booth #1856 at the upcoming Medical Design & Manufacturing (MD&M) West Exposition...

LISTED UNDER: PCBs/Embedded Computer Boards | Capacitors | Resistors

Innovative New High-Current Inductors

October 25, 2012 11:31 am | Product Releases | Comments

Precision Inc. announces the global launch of four new technologies within the company´s family of High-Current Inductors. Available in four standard sizes as well as in a variety of custom formats...

LISTED UNDER: Inductors | Metal Filter

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading