Advertisement

External Power Supply Lines Available in 30-Watt or 50-Watt Configurations

September 24, 2013 3:57 pm | by MDT Staff | ICCNEXERGY | Product Releases | Comments

ICCNexergy has announced the launch of its new 30-watt and 50-watt desktop power supply lines for both medical (MWA030, MWA050) and ITE/commercial (FWE030, FWE050) applications. These new power supply lines meet Level V efficiency standards and are available in both class I and class II designs.

LISTED UNDER: Power Supplies

Portable Power Track System

September 17, 2013 3:32 pm | by MDT Staff | Product Releases | Comments

Bring additional power from the wall direct to your work station. The PTRC3 from Mockett has an ultra-thin profile, lying nearly flat on the surface, eliminating any tripping hazards. It is also safe for casters, carts and wheelchairs to smoothly pass over.

LISTED UNDER: Power Supplies

New Data Converter Category: Inductance-to-digital

September 16, 2013 4:49 pm | by MDT Staff | Product Releases | Comments

Texas Instruments (TI) has unveiled the industry’s first inductance-to-digital converter (LDC), a new data converter category that uses coils and springs as inductive sensors to deliver higher resolution, increased reliability, and greater flexibility than existing sensing solutions at a lower system cost.

LISTED UNDER: Transformers/Converters/Conditioners
Advertisement

40W and 65W Convection Cooled AC-DC Power Supplies

September 12, 2013 4:15 pm | by MDT Staff | Murata Power Solutions | Product Releases | Comments

Murata has announced the introduction of its MVAD040 and MVAD065 open frame, convection cooled AC-DC power supplies. Packaged in the industry standard 2 x 4 inch format with a low profile, 1U compatible 1.3 inch height (50.8 x 101.6 x 33.02 mm), the low power MVAD series is suitable for use in a wide range of high volume applications.

LISTED UNDER: Power Supplies

All-new Line of Regulated AC-DC Converters

September 12, 2013 3:12 pm | by MDT Staff | Product Releases | Comments

UltraVolt has announced the launch of its newest line of single output high-voltage modules – the B Series. The new line of “Basic” performance AC-DC high-voltage modules, the B Series, consists of 12 models that provide fixed outputs of 1kV to 12kV at 4, 20, 30, or 50 watts of output power. B Series units are available with an input voltage of either 115VAC or 230VAC.

LISTED UNDER: Transformers/Converters/Conditioners

Hi-voltage Magnetics at 2013 MD&M Show in Minneapolis

September 10, 2013 4:07 pm | by MDT Staff | Datatronics Romoland, Inc. | Product Releases | Comments

Design engineers attending the MD&M Show, Oct 29-30, Minneapolis, MN, with an interest in high- voltage electronics will want to visit Booth 1710 to see the latest in magnetic component custom engineered power solutions from Datatronics, which has become a trusted supplier of life-saving electronics in the medical device industry.

LISTED UNDER: Transformers/Converters/Conditioners

30 AC Power Sources

September 5, 2013 3:29 pm | by MDT Staff | Product Releases | Comments

Associated Power Technologies (APT) announced the release of their 400XAC Series of three phase AC power sources. The 400XAC product family was designed as a versatile, three phase power source with two standard models: the 430XAC (3kVA source) and the 460XAC (6kVA source).

LISTED UNDER: Power Supplies

Dual Channel MOSFETs Simplify Synchronous Buck Design

August 27, 2013 3:14 pm | by MDT Staff | Product Releases | Comments

Advanced Power Electronics has launched an asymmetric-dual N-channel enhancement mode power MOSFET targeting synchronous buck dc/dc converter power designs.

LISTED UNDER: Transformers/Converters/Conditioners
Advertisement

Increased Performance and Reduced Cost for Switching Regulators

August 25, 2013 10:03 pm | by MDT Staff | Product Releases | Comments

Minmax Power announced expansion of their M78A and M78SA switching regulators that are pin-compatible and size-compatible with older and less-efficient LM78xx devices.

LISTED UNDER: Power Isolation/Distribution Units

Cymbet EnerChip Rechargeable Bare Die Batteries

August 21, 2013 4:34 pm | Cymbet Corporation | Products

Cymbet EnerChip™ thin film rechargeable solid-state smart batteries (SSB) are an innovation in energy storage and power management. Packaged as a Surface Mount Technology (SMT) component, the EnerChip provides energy storage in a form factor and with a convenience not previously attainable using conventional solutions such as lithium coin cells or super capacitors. Cymbet's EnerChip SSBs are well suited for applications where battery backup power is needed to maintain the settings of microcontroller memories, real-time-clocks and SRAM during power loss or power failures.

LISTED UNDER: Integrated Circuits | Batteries | Battery Charger

Cymbet EnerChip Rechargeable Solid State Batteries

August 21, 2013 4:28 pm | Cymbet Corporation | Products

Cymbet EnerChip™ thin film rechargeable solid-state smart batteries (SSB) are an innovation in energy storage and power management. Packaged as a Surface Mount Technology (SMT) component, the EnerChip provides energy storage in a form factor and with a convenience not previously attainable using conventional solutions such as lithium coin cells or super capacitors. Cymbet's EnerChip SSBs are well suited for applications where battery backup power is needed to maintain the settings of microcontroller memories, real-time-clocks and SRAM during power loss or power failures.

LISTED UNDER: Integrated Circuits | Batteries | Battery Charger

12 Watt DC-DC Converter Offers 4:1 Wide Input Range

August 14, 2013 4:16 pm | by MDT Staff | Murata Power Solutions | Product Releases | Comments

Murata has announced the NCS12 series of compact, encapsulated, metal-cased 12 Watt DC-DC converters developed by Murata Power Solutions. Accommodating a 4:1 wide input voltage range, these single and dual output isolated converters are available in 9 – 36 VDC or 18 – 75 VDC input voltage models.

LISTED UNDER: Transformers/Converters/Conditioners

Power Swap System Provides Round-the-Clock Power to Mobile Workstations

August 13, 2013 11:45 am | by MDT Staff | Product Releases | Comments

The new Power Swap System from Newcastle Systems enables the company’s NB Series Mobile Powered Workstations to operate 24 hours a day with no break for recharging. To run computers, printers, scales, testers, barcode scanners, and other electronic hardware, these easily maneuvered workstations provide clean, seamless AC power...

LISTED UNDER: Power Supplies | Carts and Workstations

Compact 400 Watt Power Supply Capable of 700 Watt Peak

August 1, 2013 12:35 pm | by MDT Staff | Product Releases | Comments

XP Power has announced the SDL400 series of 400 Watt single and dual output AC-DC power supplies. These compact units, suitable for 1U applications, are available in four mechanical formats: U channel, U channel with cover (-C option), top fan cover (-F option) and end fan cover (-E option).

LISTED UNDER: Power Supplies

Electrical/Electronic Components

July 25, 2013 12:33 pm | Schurter, Inc. | Products

Medically related products from SCHURTER meet international electro-technical standards and beyond that offer selected properties specially tuned to medical technology such as: plug-retention safety, easy-to-clean designs without edges, long service life, reliability, safety, tight seals, hygiene, simple operation and a high level of functionality. These products can be used in most equipment without additional testing.

LISTED UNDER: Connectors | Cordsets/Power Cords | EMI/RFI Filters

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading