Advertisement

Controller Adds Surface Finish Capability

February 2, 2011 7:17 am | Product Releases | Comments

The new MarForm MMQ 400-2 integrates a new controller that dramatically increases the speed and resolution of the machine, and allows it to measure surface finish characteristics according to accepted ISO, ASME, and JIS standards

LISTED UNDER: Timers and Controllers

Econo Servo Motion Controller Has Ethernet

January 3, 2011 6:25 am | Product Releases | Comments

Servo2Go.com has just added Galil Motion Control’s Econo Series Motion Controller with Ethernet, the DMC-41x3 Series, to its broad range of high performance cost effective Ethernet based motion controllers.

LISTED UNDER: Timers and Controllers

Miniaturized Positioning Controller Developed for CANopen Network

December 10, 2010 6:12 am | Maxon Precision Motors, Inc. | Product Releases | Comments

maxon’s EPOS2 24/2 was developed specifically for commanding and controlling in the CANopen network. USB and RS232 are available as further communication interfaces.

LISTED UNDER: Timers and Controllers
Advertisement

Multi-Axis Stepper Controller Is a Compact All-in-One Unit

November 22, 2010 4:46 am | Product Releases | Comments

Techno Inc. Linear Motion Systems offers the iMC-P1 multi-axis stepper controller. This single-to four-axis controller is complete with drives, power supply, I/O, enclosure, and software.

LISTED UNDER: Timers and Controllers | Power Supplies

Compact Drive Has an Integrated Motion Controller

November 22, 2010 4:40 am | Micromo | Product Releases | Comments

Micromo offers a 22-mm innovation that extends the portfolio of the BX4 range of four pole brushless DC servomotors from Faulhaber. The series 2232/2250…BX4 CSD/CCD is the world’s most compact drive with an integrated motion controller.

LISTED UNDER: Timers and Controllers

Piezo Motor Linear Stage With Closed-Loop Controller and Driver

November 18, 2010 6:31 am | Product Releases | Comments

Newport Corporation, a worldwide leader in laser and photonic solutions that make, manage and measure light, introduces the newest member of the CONEX integrated stage and controller product series.

LISTED UNDER: Timers and Controllers

Microcontrollers Integrate USB and Large RAM

August 6, 2010 7:01 am | Microchip Technology, Inc. | Product Releases | Comments

Microchip Technology Inc., a leading provider of microcontroller, analog, and Flash-IP solutions, offers the four-member PIC24FJ256GB210 microcontroller family, which integrates USB for Embedded Host/Peripheral/On-the-Go and 96 Kbytes of RAM.

LISTED UNDER: Timers and Controllers

PC Based Workcell Controller Provides Ease of Use

July 28, 2010 6:46 am | Product Releases | Comments

EPSON Robots, a global leader in advanced robotic technology, introduces the new RC620+, EPSON’s 4th generation open architecture PC based workcell controller.

LISTED UNDER: Timers and Controllers
Advertisement

Controller provides 5A RMS continuous Drive

July 1, 2010 11:00 am | Product Releases | Comments

QuickSilver Controls, Inc. adds the SilverSterling controller to its line of controllers/drivers for NEMA 11, 17, and 23 frame brushless servo motors, DC brush motors and Voice coil actuators, providing a 5A RMS continuous drive with 7A peak at 12v to 48v.

LISTED UNDER: Timers and Controllers | Actuators | Actuators

Flyback Controllers Operate From -55 to 150°C Junction Temperature

June 22, 2010 6:14 am | Product Releases | Comments

Linear Technology Corp. provides high reliability versions of the LTC3803/-3/-5 current mode flyback controllers in the tiny 6-pin ThinSOT package. These devices are specified and are 100% production tested over a junction temperature range of -55 to 150°C.

LISTED UNDER: Timers and Controllers | Power Supplies

High Performance 8-bit Microcontrollers Offer 5 V Operation

June 4, 2010 6:41 am | Microchip Technology, Inc. | Product Releases | Comments

Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, offers the industry’s broadest line of low-power, high-performance 8-bit microcontrollers (MCUs).

LISTED UNDER: Timers and Controllers

Speed Controller for Brushless DC Motors with Hall Sensors

May 24, 2010 6:26 am | Maxon Precision Motors, Inc. | Product Releases | Comments

The maxon motor DEC module 50/5 controller is a digital amplifier with speed controller for controlling brushless DC motors with Hall sensors up to 250 watts.

LISTED UNDER: Brushless DC Motors | Brushless DC Motors | Timers and Controllers

LCD Hour Meter is Conveniently Small

April 6, 2010 5:08 am | Product Releases | Comments

The Series T47A2, a mercury-free LCD miniature hour meter, has been introduced to replace the mercury hour meter. With an operating power of 6-24 VDC, this meter features a 5-digit, 4.25 mm LCD display. There is internal memory, maintained by the battery when not in use.

LISTED UNDER: Meters

Comparators Deliver 20 Gbps Speed at Less Than 150 mW Power Dissipation

January 22, 2010 10:59 am | Product Releases | Comments

The HMC874LC3C, HMC875LC3C, and HMC876LC3C are SiGe monolithic, 20 Gbps clocked comparators that feature high speed latches with programmable hysteresis and reduced swing PECL/CML/ECL output drivers respectively.

LISTED UNDER: Timers and Controllers

Gauge Accurately Measures Multilayer Thickness

August 28, 2009 12:02 pm | Lumetrics Inc. | Product Releases | Comments

OptiGauge provides a non-contact method of accurately measuring the thickness of adhesives on products. Measuring with a 40 micron beam and at 200 samples per second allows customers to tighten tolerances on their products and thus, the end users' products.

LISTED UNDER: Meters

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading