Advertisement

Compact Diode Lasers

May 1, 2014 8:10 am | by MDT Staff | Product Releases | Comments

A new series of compact, economical lasers from Coherent Inc. offer an unmatched combination of features and value to enable construction of space limited point-of-care and cost sensitive research instruments for a variety of life sciences...

LISTED UNDER: Lasers

UV LED Boards

May 1, 2014 8:10 am | by MDT Staff | Product Releases | Comments

Innovations in Optics, Inc. introduces LumiBright UV Boards for high power UV LED applications such as UV curing, 3D printing, maskless lithography, photodynamic therapy, and fluorescence excitation in life science or machine vision...

LISTED UNDER: Lamps and Lights

Programmable HPLC Column Chiller/Heater

April 30, 2014 8:11 am | by MDT Staff | Torrey Pines Scientific, Inc. | Product Releases | Comments

Torrey Pines Scientific, Inc. announces its new EchoTherm Model CO50 Programmable HPLC Column Chiller/Heater. The CO50 has a temperature range from 4.0°C to 100.0°C readable and settable to 0.1°C. The PID control software...

LISTED UNDER: Area (Surface) Heater | Chillers/Coolers
Advertisement

Polyether-Based Thermoplastic Polyurethanes

April 28, 2014 9:10 am | by MDT Staff | Product Releases | Comments

Now available from APS Elastomers are Huntsman Polyurethanes’ IROGRAN polyether-based thermoplastic polyurethanes (TPUs). These products are designed to meet a variety of challenging wiring and cabling applications, including household wiring...

LISTED UNDER: Wire and Cable | Polyurethanes

Two Watt DC-DC Converter

April 28, 2014 9:03 am | by MDT Staff | Murata Power Solutions | Product Releases | Comments

Murata today announced the MGJ2 series of 2 Watt high isolation dual output DC/DC converters from Murata Power Solutions. These compact encapsulated devices are suitable for powering "high side" and "low side" gate drives in bridge circuits...

LISTED UNDER: Transformers/Converters/Conditioners

Miniature Liquid Level Switches

April 28, 2014 8:58 am | by MDT Staff | Measurement Specialties, Inc. | Product Releases | Comments

Measurement Specialties, an expert in sensor design and manufacturing, now offers the LL-01 Sentio Series of miniature ultrasonic liquid level switches that combines ultrasonic technology with reliable analog circuitry to precisely measure...

LISTED UNDER: Switches/Pushbuttons | Level Controls

Ultrasonic Sensors

April 25, 2014 8:13 am | by MDT Staff | Pepperl+Fuchs, Inc. | Product Releases | Comments

Pepperl+Fuchs introduces Series IO Ultrasonic Sensors. These IO-Link compatible sensors establish a new level of versatility and convenience with simple pushbutton programming. Pushbutton programming provides fast and easy on-site...

LISTED UNDER: Switches/Pushbuttons | Position

Welding Spark Resistant PUR Cable

April 24, 2014 8:12 am | by MDT Staff | Binder Usa | Product Releases | Comments

Binder-USA is pleased to announce the addition of spark resistant PUR cables to the M12 cordset line up. The robust PUR cable ensures a resistance to sparks, wear, impact and flexibility. The new M12 A-coded cordsets are ideally suited for robot...

LISTED UNDER: Cable Assemblies | Connectors
Advertisement

Disc Magnet Motor

April 24, 2014 8:11 am | by MDT Staff | Portescap | Product Releases | Comments

Portescap introduces our P760 series disc magnet motor, which outperforms standard Brushless DC motors in various applications. The unique thin disc magnet motor has been optimized to deliver high torque and acceleration up to 5,000 rpm...

LISTED UNDER: Step Motors | Stepping Motor Drives

Cartridge & Immersion Heaters

April 23, 2014 4:17 pm | Hotwatt, Inc. | Products

Cartridge heaters provide localized heat to restricted work areas requiring close thermal control. Dies, platens and a variety of other types of processing equipment are efficiently heated. Closely controlled work temperatures up to 1400º F (760º C) are obtained by a combination of heater location and proper wattage output. Immersion heaters are ideally suited for heating various liquids. They are available in various sheath materials and watt densities tailored for your specific applications. Units may be supplied for single, three phase or three heat operation. The lead end of the unit may be sealed for extreme environmental conditions.

LISTED UNDER: Heating Elements

Crankcase Heaters

April 23, 2014 4:15 pm | Hotwatt, Inc. | Products

Crankcase heaters are used to overcome the problem of migration and condensation of refrigerant in the crankcases of compressors used in air conditioning and heat pump systems. They are designed to keep the crankcase oil at a temperature higher than the coldest part of the system to prevent migration. They are constructed of the highest quality corrosion resistance materials and sealed against moisture.

LISTED UNDER: Heating Elements

Ceramic Heaters

April 23, 2014 4:15 pm | Hotwatt, Inc. | Products

Ceramic heaters are a ceramic body encasing a resistance element and packed within magnesium oxide. Temperatures to 1300°F (705°C) for applications like copiers, dehumidifiers, glue guns, heat sealing tools, instrumentation, resisters, soldering and de-soldering equipment and valve heaters.

LISTED UNDER: Heating Elements

Band Heaters

April 23, 2014 4:13 pm | Hotwatt, Inc. | Products

Band heaters are used in multiple applications like cylinders, dies, drums, holding tanks, injections and blow molding machines, and Plastic Extruders as well as many other applications. The Hotwatt Standard Band Heaters are manufactured in one or two piece constructions with maximum inside diameters of 11 1/2" and 22 1/2" respectively. Three or more sections are employed when heaters of larger diameters are needed (as for blown film extrusion dies).

LISTED UNDER: Heating Elements

Tubular & Finned Tubular Heaters

April 23, 2014 4:12 pm | Hotwatt, Inc. | Products

Tubular & Finned Tubular heaters have built in resistance to impact, vibration, corrosion and temperature extremes. The heater is swaged, reducing the diameter of the sheath and compacting the insulation. This insures rapid heat transfer and holds the coil in position for forming. Many diameters, sheath materials and configurations are available.

LISTED UNDER: Heating Elements

Glasrope & Foil Heaters

April 23, 2014 4:11 pm | Hotwatt, Inc. | Products

Foil & Rope heaters are a self-contained one piece assembly. A resistance element is laminated between two layers of aluminum foil. This heater is ideally suited for area and surface heating applications. Operating temperatures up to 300º F (150º C). Sizes range from 1.25" to 60" wide with lengths of 4" and up. Glasrope heaters are flexible heaters available in various lengths, sheath materials and terminations. Operating temperatures up to 900º F (485º C).

LISTED UNDER: Heating Elements

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading