Motion Control Development Tool Eliminates Confusion
March 11, 2008 10:05 am | Maxon Precision Motors, Inc. | Product Releases | CommentsThe Freedom Series is a user friendly, motion control development tool designed to eliminate the confusion often associated with motion systems integration.
LISTED UNDER: Encoders
Thermal Transfer Bar Code Label Printers
March 11, 2008 10:05 am | Tharo Systems, Inc. | Product Releases | CommentsThe PA2000t label printer/applicator is a cost-effective accessory for the H-400/H-600 Series of thermal/thermal transfer bar code label printers.
LISTED UNDER: Labeling | Cylinders
Three Sizes Added to Pneumatic Rodless Product Family
March 11, 2008 10:05 am | Tolomatic, Inc. | Product Releases | CommentsThree sizes have been added to the MXP rodless product family, completing the size range from 16 mm to 63 mm bores. MXP is designed with the company’s exclusive Endurance Technology features for maximum durability and long life.
LISTED UNDER: Linear Motion Systems
Black Chrome Plating on Motion Components
March 11, 2008 10:05 am | Misumi Usa, Inc | Product Releases | CommentsLow-temp, black chrome plating is available for a variety of the company’s motion components, including linear shafts, linear bushings, linear guides, ball screws, and others. Through electroplating, an alloyed surface is formed to create an anti-corrosion coating (black film) on the component.
LISTED UNDER: Linear Motion Systems
Modular Control System Offers Flexibility
March 11, 2008 10:05 am | Acs Motion Control | Product Releases | CommentsThis rack-based modular control system offers the flexibility to control up to eight rack servo drives and 64 distributed axes via CANopen.
LISTED UNDER: Drives
Portable UV Curing System for 3D Surfaces
March 11, 2008 10:05 am | Uv Iii Systems, Inc. | Product Releases | CommentsThe Multicure UV curing system features a hand-held quartz lamp which produces a narrow band 365 nm output (other spectrums available) for curing three-dimensional surfaces coated with UV-curable coatings or adhesives.
LISTED UNDER: Adhesive-Curing Systems | Power Supplies
Custom Coil Cords Provide Reliability
March 11, 2008 10:05 am | Carrio Cabling | Product Releases | CommentsCustom coil cords are manufactured exclusively in the U.S. using the company’s lot size of one and Six Sigma manufacturing process, which equates to excellent turn-around times and near-zero defects.
LISTED UNDER: Cordsets/Power Cords | Product R&D
Ultra-Miniature, Half Pitch, Side-Actuated DIP Switch
March 11, 2008 10:05 am | C&K Components | Product Releases | CommentsDesignated the TDP Series, this ultra-miniature, surface mount, side-actuated DIP switch features a dual bifurcated wiping action that ensures reliable contact. When mounted horizontally, the side-actuation mechanism provides visual confirmation of the on/off status. The switches measure just 4.
LISTED UNDER: Switches/Pushbuttons
Multiport Serial Card Lines Certified for Vista
March 11, 2008 10:05 am | Comtrol Corp. | Product Releases | CommentsThe “Certified for Windows Vista” logo identifies the Comtrol Rocketport Express and Rocketport Infinity product lines as fully designed and tested for the latest 32-bit and 64-bit Microsoft operating system.
LISTED UNDER: PCBs/Embedded Computer Boards
Yellow Laser Offers Higher Power and Low Noise
March 11, 2008 10:05 am | Coherent Semiconductor Group | Product Releases | CommentsThe Compass 561 laser delivers 50 mW at 561 nm, while still offering substantially lower noise than any other solid state yellow laser currently available. Specifically, this frequency doubled, diode-pumped solid state laser has a noise specification of 0.
LISTED UNDER: Lasers
Load Cell Amplifier Provided Lead Free
March 11, 2008 10:05 am | Futek Advanced Sensor Technology, Inc. | Product Releases | CommentsThe CSG110 inline signal conditioner/amplifier can now be provided lead free per RoHS directive’s requirements.
LISTED UNDER: Load Cells | Power Supplies
Anti-Backlash Assembly Eliminates Drag and Wear
March 11, 2008 10:05 am | Kerk Motion Products | Product Releases | CommentsThe VHD series eliminates drag and wear associated with high pre-load forces. The anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any of the company’s nut assemblies.
LISTED UNDER: Ball and Lead Screws
Open Frame AC-DC Power Supplies
March 11, 2008 10:05 am | Lambda | Product Releases | CommentsThe ZWX-series are open frame AC-DC power supplies provide voltages including +3.3 V, +5 V, +12 V, -12 V, and +5 V (standby), and are 1 U rack/enclosure mountable. The ZWX300 includes a sixth output (a second +12 V).
LISTED UNDER: Power Supplies
Knobs in Many Configurations, Styles, Sizes
March 11, 2008 10:05 am | Keystone Electronics Corp. | Product Releases | CommentsManufactured in an assortment of configurations, styles, and sizes, all meeting the highest quality levels, these knobs are made of ABS or aluminum with nickel-plated brass bushings and reinforced shaft holes to suit most round or flattened shafts.
LISTED UNDER: Knobs | Handles and Knobs
HCMOS Oscillator Offers Tight Frequency Stability
March 11, 2008 10:05 am | Keystone Electronics Corp. | Product Releases | CommentsThe XO125 is a 5 V voltage controlled oven compensated controlled crystal oscillator with an HCMOS output. The XO125 is designed for Stratum 3E applications requiring a very low aging rate and very tight frequency stability. The unit is housed in the standard CO8 EURO package.
LISTED UNDER: Crystals/Oscillators/Piezoelectrics
