Advertisement

Absolute Encoder for Harsh Applications

July 18, 2008 5:33 am | Dynapar | Product Releases | Comments

Three design elements make these encoders ideal for harsh applications; they utilize magnetic technology, they use considerably oversized bearings, and they are tightly sealed around the shaft to resist liquid ingress.

LISTED UNDER: Encoders
Advertisement

PreFeeding Machine is Precise and Powerful

July 18, 2008 5:33 am | Schleuniger, Inc. | Product Releases | Comments

This high-speed prefeeding unit is used with automatic Cut Strip Terminate machines. A controlled roller drive feeds the wire into an accumulator to reduce tension on the wire before it is pulled by the high-speed feeding mechanism of the CST machine for further processing.

LISTED UNDER: Velocity/Feed Controllers

Technology Bridges Cutting Gap

July 18, 2008 5:33 am | AZCO Corp. | Product Releases | Comments

The knife uses a patent-pending technology which makes it operate at a high-cycle rate. It features quiet operation and simple installation. It is pneumatically-operated with a self-contained air cylinder/manifold/solenoid, meaning the time and labor is no longer needed for installation.

LISTED UNDER: Custom Cutting Tools | Cylinders

Hybrid Stepper Motors Offer Fine Positioning Capability

July 17, 2008 5:14 am | Ametek Technical & Industrial Products, Inc. | Product Releases | Comments

This new hybrid stepper motor features low detent torque to holding torque ratios, promoting smooth operation and the fine positioning capability required for microstep operation.

LISTED UNDER: Other Motors

Right-Angle Switches with Custom Snap-On Caps

July 16, 2008 5:08 am | C&K Components | Product Releases | Comments

Right-angle illuminated pushbutton switches are available with or without LEDs and feature custom snap-on caps. The pushbutton switches are designed to eliminate the need for a separate LED and light pipe on a printed circuit board.

LISTED UNDER: Switches/Pushbuttons

Size 14 Linear Actuators With Integrated Connector

July 15, 2008 4:33 am | Product Releases | Comments

The hybrid linear actuators are offered alone or with a harness assembly. They also come RoHS compliant and feature a positive latch in order for high connection integrity. The connector is rated up to 3 amps and the mating connector will handle a range of wire gauges from 22 to 28.

LISTED UNDER: Actuators | Actuators | Actuators

Brushless DC Motors Feature High Operating Speed

July 11, 2008 4:50 am | Bei Kimco Magnetics | Product Releases | Comments

These brushless DC motors, measured at 3.4 inches in diameter, are the latest addition to the company’s growing family of motion control products. The motors offer all the benefits of brushless DC technology and are available in three standard frame lengths of 2.0, 2.6, and 3.

LISTED UNDER: Brushless DC Motors

Ethernet Connector Offers Fast and Tool-Free Connectivity

July 11, 2008 4:37 am | Wago Corporation | Product Releases | Comments

Company’s 8-pole Ethernet connector is a pluggable RJ-45 connector that substantially decreases the time needed for Ethernet wiring.

LISTED UNDER: Ethernet/Internet Connectivity Devices

Servo Drive Provide Networking and Stand-Alone Motion Control

July 10, 2008 4:39 am | Copley Controls Corp. | Product Releases | Comments

The versatile panel-mounting servo drive’s extended temperature, humidity, vibration, and shock ranges provide added security in non-extreme applications.

LISTED UNDER: Servo | Actuators | Actuators

High Power Density Power Supply With Medical Approvals

July 9, 2008 5:58 am | Protek Power | Product Releases | Comments

Company has announced the release of AC/DC power supplies, which offer a performance packed design and compliance to worldwide medical safety standards.

LISTED UNDER: Power Supplies

25 A and 30 A Converters Deliver up to 165 W

July 9, 2008 5:50 am | Fdk America, Inc. | Product Releases | Comments

Three new DC/DC converters have been added to company’s existing series of non-isolated point-of-load (POL) converters. These converters operate from a 6.0 V DC input bus, and are offered in industry-standard footprints.

LISTED UNDER: Transformers/Converters/Conditioners

Camera Offers Affordable Multi-Spectral Imaging

July 8, 2008 4:38 am | Jai Inc., Usa | Product Releases | Comments

A camera capable of simultaneously measuring visible and near-infrared light spectrums has been designed for multi-spectral imaging. By combining these two features into one camera, both the cost and the difficulty in completing vision applications has been addressed.

LISTED UNDER: Camera | Camera

MCU Line Offers Low Voltage, Great Power Efficiency

July 7, 2008 5:06 am | Mouser Electronics, Inc. | Product Releases | Comments

These microcontrollers (MCUs) are low-voltage and low-power, operational down to 0.9 V. With an integrated DC-DC converter, the device can operate over the 0.9-1.8 V ranges, thus supporting both single and dual battery operation.

LISTED UNDER: Timers and Controllers

Shielded Flat Cables For Flat Displays

July 7, 2008 4:51 am | Axon Cable Inc. | Product Releases | Comments

Company has expanded its line of flat cable assemblies by adding shielded assembly connectors. These assemblies are well-suited for connecting displays with LVDS data interfaces.

LISTED UNDER: Wire and Cable | Cable Assemblies

USB Functionality Boosts Performance to 80 MHz

July 3, 2008 5:04 am | Microchip Technology Inc. | Product Releases | Comments

Integrated USB 2.0 on-the-go (OTG) functionality has been added to the 32-bit microcontroller family. Integrated USB OTG helps design engineers easily and cost-effectively address the growing demand for advanced USB connectivity in their end products.

LISTED UNDER: Timers and Controllers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading