Advertisement

HMIS Department Designs and Provides Customer Specific Interface Systems

December 5, 2008 7:04 am | Eao Corporation | Product Releases | Comments

The company's HMIS (human machine interface systems) department provides end users with the designs and manufacturing capabilities of interface systems within the guidelines of customer specific requirements.

LISTED UNDER: Input Devices
Advertisement

Illuminated Tactile Switch Has Independent LED Leads

December 5, 2008 7:04 am | E-Switch | Product Releases | Comments

The TL1240 is an illuminated tact switch with multiple LED color options. This illuminated tact switch has through-hole termination and independent LED leads. Its reliable dome technology is perfect for medical devices.

LISTED UNDER: Switches/Pushbuttons

Pneumatic Cylinder Calibrated for Precise 0 to 10 Volt DC Output

December 5, 2008 7:04 am | Bimba Manufacturing Company | Product Releases | Comments

Unlike traditional pneumatic feedback technology, these non-contact pneumatic position feedback cylinders are resistant to the effects of moisture, oil, airborne debris, and dust. In addition, each cylinder is factory calibrated for precise 0 to 10 volt DC output.

LISTED UNDER: Cylinders | Cylinders

Angular Bearings Used to Support Heavy Thrust/Radial Loads

December 5, 2008 7:04 am | Misumi Usa, Inc | Product Releases | Comments

A line of angular bearings with housings is used to support heavy thrust loads in combinations with radial loads in the same application.

LISTED UNDER: Bearings

Photoelectric Proximity Switches Have a Long Sensing Distance

December 5, 2008 7:04 am | Contrinex, Inc. | Product Releases | Comments

These photoelectric proximity switches are designed to provide users with a high level of performance at competitive prices. The 5050 series is built in the widely used 50 x 50 mm format and is available in diffuse, retro-reflective (reflex), and through-beam versions.

LISTED UNDER: Others

M12 Socket Connectors Provided With Profibus Cable

December 5, 2008 7:04 am | Binder Usa | Product Releases | Comments

The M12 shielded panel-mounted male or female connector is pre-assembled for Profibus and Ethernet users. The receptacle is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles are available in front- or rear-mount design for mounting to control cabinets.

LISTED UNDER: Connectors | Wire and Cable

26 and 28 AWG Conductors Allow Smaller, More Flexible Cable

December 5, 2008 7:04 am | Alpha Wire | Product Releases | Comments

The Xtra-Guard family of performance cables has been expanded with 26 AWG and 28 AWG stranded conductors.

LISTED UNDER: Wire and Cable

DC Motor Offered in a Small Size

December 5, 2008 7:04 am | Maxon Precision Motors, Inc. | Product Releases | Comments

The RE 8 motor has a diameter of 8.0 mm, length of 16 mm, and weighs less than 4.0 grams. The motor shaft is as thin as pencil lead at only 0.8 mm in diameter and turns in two sleeve bearings.

LISTED UNDER: Brush DC Motors

Step Motors Suited for Multi-Axis Applications

December 5, 2008 7:04 am | Technosoft Sa | Product Releases | Comments

The IS23x-MA Intelligent Step Motors, based on the MotionChip DSP Control Technology, is specially adapted to distributed motion control applications with integrated intelligence.

LISTED UNDER: Step Motors | Power Supplies

Brushless Motor Constructed With No Adhesives-Bonded Joints

December 5, 2008 7:04 am | Micromo | Product Releases | Comments

With the introduction of the BX4 series of brushless DC servomotors, the company has come up with a modular design that is limited to just a few components and entirely eliminates the need for adhesive-bonded joints.

LISTED UNDER: Brushless DC Motors

Micro Manipulator System Provides High Precision

December 5, 2008 7:04 am | Steinmeyer, Inc. | Product Releases | Comments

Manufactured from high strength anodized aluminum, this high precision micro manipulator stage—MT 105-50-LM—offers a travel of 50 mm and offers a positional accuracy of 1.0 µm, straightness/flatness runout of ±1.0 µm, and repeatability of ±0.2 µm.

LISTED UNDER: Positioning Stages and Tables

DC Actuators Suited for Devices Requiring Continuous Rotational Operation

December 5, 2008 7:04 am | Johnson Electric (Usa) | Product Releases | Comments

These DC actuators are suited for medical devices that require continuous rotational operation, such as circulatory assist devices, breathing apparatus, metering pumps, surgical tools, and imaging equipment. The EFB series is ideal for high speed mode applications.

LISTED UNDER: Actuators | Actuators | Actuators

Motor/Drive Technology Offer Array of Step Functionality

December 5, 2008 7:04 am | Product Releases | Comments

The MDrivePlus product line, with its proven leading integrated motor and drive technology, expands its smallest and lowest cost all-in-one motion control product offering with two new step & direction solutions: the MDrive14Plus Microstepping and the MDrive14Plus Half/Full Step.

LISTED UNDER: Drives

Metric Clutches and Brakes are Cost-Effective, High-Performance Solution

December 5, 2008 7:04 am | Danaher Motion | Product Releases | Comments

Deltran MCS/MBF series metric clutches and brakes are RoHS-compliant. They are available off-the-shelf in diameters from 63 to 280 mm, torque ratings from 5.5 to 500 Nm, seven different frame sizes, and a wide selection of DIN 6885/1-compliant metric bores and standard metric keyways.

LISTED UNDER: Brakes and Clutches

Linear Voice Coil Actuators Provide High Safety

December 5, 2008 7:04 am | Bei Kimco Magnetics | Product Releases | Comments

A family of linear voice coil actuators provides increased safety and long service life. The family features two patented spring designs based on magnetic, rather than mechanical, technology.

LISTED UNDER: Actuators | Actuators | Actuators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading