Advertisement

Membrane Switch Assemblies

November 11, 2008 5:34 am | Eastprint Incorporated | Product Releases | Comments

Single-use membrane switch assemblies are custom designed and manufactured to OEM specifications for use in a wide variety of hand-held medical and surgical devices.

LISTED UNDER: Membrane Switches

Medically Approved Power Supply Meets 1U Height Constraints

November 10, 2008 6:53 am | Tumbler Technologies + Trumpower | Product Releases | Comments

The 180W TMPC-180-1U has a height of 1.59? that makes the PC power supply ideal for 1U and other applications where height is limited. The unit, which contains a 90-265 VAC full range input and active PFC, is approved by UL, cUL, and VDE to UL 60601-1, EN 60601-1, IEC 60601-1 medical standards.

LISTED UNDER: Power Supplies | Power Supplies

Chip Fuse in a 1206 Package Rated up to 25 Amps

November 10, 2008 6:53 am | Schurter, Inc. | Product Releases | Comments

The 1206 chip fuse offers rated current values up to 25 A. The slow-blow UST 1206 provides high melting I 2 t values for impressive inrush withstand performance.

LISTED UNDER: Fuses/Surge Suppressors/Circuit Breakers
Advertisement

Torque Sensor Available With USB Output Option

November 10, 2008 6:53 am | Futek Advanced Sensor Technology, Inc. | Product Releases | Comments

The TFF400 reaction torque sensor has a USB Digital Interface with 16 bits resolution. The sensors feature a Flange to Flange mounting solution with torque measurements ranging from ±5 in.-oz to 500 in.-lbs and torsional stiffness of 325 in.-oz/radians to 199,000 in. lbs/radians.

LISTED UNDER: Strain Gauge

OEM Servo Motor Controller Has CANopen, CiA 402

November 10, 2008 6:53 am | Quicksilver Controls, Inc. | Product Releases | Comments

A CANopen option has been added to the company’s OEM servo motor controller. CANopen may be configured for peer-to-peer, master, or slave. This allows the controllers to share I/O and registers with other CANopen enabled SilverDust controllers or third party CANopen devices (e.g.

LISTED UNDER: Motor Speed Controllers

Motorized Linear Slide Series Achieves High Positioning Response

November 10, 2008 6:53 am | Oriental Motors Usa Corp. | Product Releases | Comments

The RoHS compliant EZ Limo EZSII motorized linear slide series uses a step motor to achieve high positioning response without any missteps. The series consists of three sizes: EZS3, EZS4, and EZS6. The EZS3 and EZS4 ranges from 1.97? to 27.56? stroke in 1.97? increments.

LISTED UNDER: Slides

Actuator Acts as Both Motor and Diaphragm

November 10, 2008 6:52 am | Adaptivenergy Llc | Product Releases | Comments

The proprietary RLP-125 actuator acts as both the motor and the diaphragm in liquid movement applications. The actuator may be embedded directly in a fluidic backplane to provide highly reliable pumping action with minimal impact on design architecture.

LISTED UNDER: Actuators | Diaphragm Pump

Motors Compatible With Any Three Phase Motor Controller

November 10, 2008 6:52 am | Applimotion, Inc. | Product Releases | Comments

Due to their low profile, light weight and large through holes, ULT Series direct drive frameless motors are ideal for imaging, sensing, pointing, and scanning applications.

LISTED UNDER: Drives
Advertisement

Bar Code Label Printer Offers 1,200 Dots per Inch Printing

November 10, 2008 6:52 am | Primera Technology, Inc. | Product Releases | Comments

The LX200 Label Printer utilizes the latest in monochrome high-speed inkjet printing technology. With 1,200 dpi print resolution, the printer has almost six times as many dots per inch as most thermal transfer bar code printers.

LISTED UNDER: Printers

Temperature-Stabilized Device Offers Excellent Wavelength

November 10, 2008 6:52 am | Stockeryale Inc. | Product Releases | Comments

This ColdRay laser is a temperature-stabilized device resulting in excellent wavelength, excellent power, and pointing stability, as well as a long lifetime. It is available in a wide range of wavelengths, ranging from 375 to 830 nm.

LISTED UNDER: Lasers

Power Supply Meets RoHS, EISA Standards

November 10, 2008 6:52 am | Product Releases | Comments

The GT-81085 series of fixed blade wall plug-in power supplies are offered in Class II, double-enforced insulation mechanical configurations. The regulated output voltage is 5 to 13.5 V up to 15 W of continuous power.

LISTED UNDER: Plugs and Receptacles | Power Supplies

Sensors Developed for Highly Accurate Medical Thermometers

November 10, 2008 6:52 am | Epcos, Inc. | Product Releases | Comments

These disposable thermometers are characterized by accuracy of up to ±0.1 K and a short response time of 7 s for fast, easy measurement of a patient’s body temperature. The disposable sensors are based on proven ceramic technology for NTC thermistors on a chip basis.

LISTED UNDER: Thermistor

Miniature Enclosures Provided With Wrist Strap

November 10, 2008 6:52 am | Okw Enclosures, Inc. | Product Releases | Comments

A range of Minitec miniature enclosures now includes wrist strap models. These highly attractive cases have been designed for small electronic devices that can be worn on the wrist.

LISTED UNDER: Enclosures/Chassis

Prototype Flexible Heaters Design Kit

November 10, 2008 6:52 am | Product Releases | Comments

Minco, a designer and manufacturer of critical components for critical applications, has a new flexible heaters prototype design kit that lets users easily test and prototype a heater concept before starting on a journey of custom-built-to-order product.

LISTED UNDER: Area (Surface) Heater

"Build-A-Solution" Helps Incorporate Optical Fiber

November 10, 2008 6:52 am | Product Releases | Comments

CeramOptec's newly redesigned website features the unique Build-A-System which helps customers find the right optical fiber for their design. A user-friendly, step-by-step process leads visitors through the specification process.

LISTED UNDER: Fiber Optics

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading