Color-Changing Pushbuttons Available in Three Sizes

January 8, 2009 10:18 am | Product Releases | Comments

The Series 95 color-changing pushbuttons are available in three different sizes. The medium-sized 15.88 mm 2 pushbutton complements the other sizes—12.7 mm 2 and 19.05 mm 2 , offering designers even more choice for creating control panels that are functional and intuitive to use.

LISTED UNDER: Switches/Pushbuttons

Power Adapters Comply With CEC/Energy Star Requirements

January 6, 2009 6:28 am | Tumbler Technologies + TRUMPower | Product Releases | Comments

The TMP60 series of medical grade AC/DC desktop power adapters deliver up to 60 W of output power. Meeting CEC and Energy Star level IV requirements, the TMP60 power supplies (single ouput models) have an average efficiency greater than or equal to 85% and standby power consumption less than 0.5 W.

LISTED UNDER: Power Adapter | Power Adapter

Power Entry Modules Offer Vertical Flange Mounting Option

December 5, 2008 7:04 am | Product Releases | Comments

These vertical-flange mount power entry modules are rated for 6 and 10 A. The vertical-mount configuration reduces panel area requirements and gives designers greater packaging flexibility in a wide range of applications, including healthcare equipment.

LISTED UNDER: Power Supplies

Pneumatic Cylinder Calibrated for Precise 0 to 10 Volt DC Output

December 5, 2008 7:04 am | Bimba Manufacturing Company | Product Releases | Comments

Unlike traditional pneumatic feedback technology, these non-contact pneumatic position feedback cylinders are resistant to the effects of moisture, oil, airborne debris, and dust. In addition, each cylinder is factory calibrated for precise 0 to 10 volt DC output.

LISTED UNDER: Cylinders | Cylinders

Coaxial Resonator Oscillator Maximizes Performance and Efficiency

December 5, 2008 7:04 am | Product Releases | Comments

The CVCO55CXT-6250-6250 coaxial resonator oscillator (CRO) employs frequency doubling, 2X fundamental technology to reach new performance levels of lower phase noise, and much lower harmonics over the competition, while achieving lower current consumption in the process.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Illuminated Tactile Switch Has Independent LED Leads

December 5, 2008 7:04 am | Product Releases | Comments

The TL1240 is an illuminated tact switch with multiple LED color options. This illuminated tact switch has through-hole termination and independent LED leads. Its reliable dome technology is perfect for medical devices.

LISTED UNDER: Switches/Pushbuttons

HMIS Department Designs and Provides Customer Specific Interface Systems

December 5, 2008 7:04 am | Product Releases | Comments

The company's HMIS (human machine interface systems) department provides end users with the designs and manufacturing capabilities of interface systems within the guidelines of customer specific requirements.

LISTED UNDER: Input Devices

Photoelectric Proximity Switches Have a Long Sensing Distance

December 5, 2008 7:04 am | Product Releases | Comments

These photoelectric proximity switches are designed to provide users with a high level of performance at competitive prices. The 5050 series is built in the widely used 50 x 50 mm format and is available in diffuse, retro-reflective (reflex), and through-beam versions.


Angular Bearings Used to Support Heavy Thrust/Radial Loads

December 5, 2008 7:04 am | Product Releases | Comments

A line of angular bearings with housings is used to support heavy thrust loads in combinations with radial loads in the same application.


26 and 28 AWG Conductors Allow Smaller, More Flexible Cable

December 5, 2008 7:04 am | Alpha Wire | Product Releases | Comments

The Xtra-Guard family of performance cables has been expanded with 26 AWG and 28 AWG stranded conductors.

LISTED UNDER: Wire and Cable

M12 Socket Connectors Provided With Profibus Cable

December 5, 2008 7:04 am | Product Releases | Comments

The M12 shielded panel-mounted male or female connector is pre-assembled for Profibus and Ethernet users. The receptacle is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles are available in front- or rear-mount design for mounting to control cabinets.

LISTED UNDER: Connectors | Wire and Cable

Micro Manipulator System Provides High Precision

December 5, 2008 7:04 am | Steinmeyer, Inc. | Product Releases | Comments

Manufactured from high strength anodized aluminum, this high precision micro manipulator stage—MT 105-50-LM—offers a travel of 50 mm and offers a positional accuracy of 1.0 µm, straightness/flatness runout of ±1.0 µm, and repeatability of ±0.2 µm.

LISTED UNDER: Positioning Stages and Tables

DC Motor Offered in a Small Size

December 5, 2008 7:04 am | Maxon Precision Motors, Inc. | Product Releases | Comments

The RE 8 motor has a diameter of 8.0 mm, length of 16 mm, and weighs less than 4.0 grams. The motor shaft is as thin as pencil lead at only 0.8 mm in diameter and turns in two sleeve bearings.


Step Motors Suited for Multi-Axis Applications

December 5, 2008 7:04 am | Product Releases | Comments

The IS23x-MA Intelligent Step Motors, based on the MotionChip DSP Control Technology, is specially adapted to distributed motion control applications with integrated intelligence.

LISTED UNDER: Step Motors | Power Supplies

Brushless Motor Constructed With No Adhesives-Bonded Joints

December 5, 2008 7:04 am | Micromo | Product Releases | Comments

With the introduction of the BX4 series of brushless DC servomotors, the company has come up with a modular design that is limited to just a few components and entirely eliminates the need for adhesive-bonded joints.

LISTED UNDER: Brushless DC Motors


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.