Advertisement

Three Sizes Added to Pneumatic Rodless Product Family

March 11, 2008 10:05 am | Product Releases | Comments

Three sizes have been added to the MXP rodless product family, completing the size range from 16 mm to 63 mm bores. MXP is designed with the company’s exclusive Endurance Technology features for maximum durability and long life.

LISTED UNDER: Linear Motion Systems

Multiport Serial Card Lines Certified for Vista

March 11, 2008 10:05 am | Product Releases | Comments

The “Certified for Windows Vista” logo identifies the Comtrol Rocketport Express and Rocketport Infinity product lines as fully designed and tested for the latest 32-bit and 64-bit Microsoft operating system.

LISTED UNDER: PCBs/Embedded Computer Boards

Black Chrome Plating on Motion Components

March 11, 2008 10:05 am | Product Releases | Comments

Low-temp, black chrome plating is available for a variety of the company’s motion components, including linear shafts, linear bushings, linear guides, ball screws, and others. Through electroplating, an alloyed surface is formed to create an anti-corrosion coating (black film) on the component.

LISTED UNDER: Linear Motion Systems
Advertisement

Modular Control System Offers Flexibility

March 11, 2008 10:05 am | Product Releases | Comments

This rack-based modular control system offers the flexibility to control up to eight rack servo drives and 64 distributed axes via CANopen.

LISTED UNDER: Drives

Anti-Backlash Assembly Eliminates Drag and Wear

March 11, 2008 10:05 am | Product Releases | Comments

The VHD series eliminates drag and wear associated with high pre-load forces. The anti-backlash assembly provides the maximum load-carrying capability and the highest axial and radial stiffness of any of the company’s nut assemblies.

LISTED UNDER: Ball and Lead Screws

Portable UV Curing System for 3D Surfaces

March 11, 2008 10:05 am | UV III Systems, Inc. | Product Releases | Comments

The Multicure UV curing system features a hand-held quartz lamp which produces a narrow band 365 nm output (other spectrums available) for curing three-dimensional surfaces coated with UV-curable coatings or adhesives.

LISTED UNDER: Adhesive-Curing Systems | Power Supplies

Ultra-Miniature, Half Pitch, Side-Actuated DIP Switch

March 11, 2008 10:05 am | Product Releases | Comments

Designated the TDP Series, this ultra-miniature, surface mount, side-actuated DIP switch features a dual bifurcated wiping action that ensures reliable contact. When mounted horizontally, the side-actuation mechanism provides visual confirmation of the on/off status. The switches measure just 4.

LISTED UNDER: Switches/Pushbuttons

Load Cell Amplifier Provided Lead Free

March 11, 2008 10:05 am | Product Releases | Comments

The CSG110 inline signal conditioner/amplifier can now be provided lead free per RoHS directive’s requirements.

LISTED UNDER: Load Cells | Power Supplies
Advertisement

Yellow Laser Offers Higher Power and Low Noise

March 11, 2008 10:05 am | Product Releases | Comments

The Compass 561 laser delivers 50 mW at 561 nm, while still offering substantially lower noise than any other solid state yellow laser currently available. Specifically, this frequency doubled, diode-pumped solid state laser has a noise specification of 0.

LISTED UNDER: Lasers

Custom Coil Cords Provide Reliability

March 11, 2008 10:05 am | Product Releases | Comments

Custom coil cords are manufactured exclusively in the U.S. using the company’s lot size of one and Six Sigma manufacturing process, which equates to excellent turn-around times and near-zero defects.

LISTED UNDER: Cordsets/Power Cords | Product R&D

HCMOS Oscillator Offers Tight Frequency Stability

March 11, 2008 10:05 am | Keystone Electronics Corp. | Product Releases | Comments

The XO125 is a 5 V voltage controlled oven compensated controlled crystal oscillator with an HCMOS output. The XO125 is designed for Stratum 3E applications requiring a very low aging rate and very tight frequency stability. The unit is housed in the standard CO8 EURO package.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics

Open Frame AC-DC Power Supplies

March 11, 2008 10:05 am | Product Releases | Comments

The ZWX-series are open frame AC-DC power supplies provide voltages including +3.3 V, +5 V, +12 V, -12 V, and +5 V (standby), and are 1 U rack/enclosure mountable. The ZWX300 includes a sixth output (a second +12 V).

LISTED UNDER: Power Supplies

Knobs in Many Configurations, Styles, Sizes

March 11, 2008 10:05 am | Keystone Electronics Corp. | Product Releases | Comments

Manufactured in an assortment of configurations, styles, and sizes, all meeting the highest quality levels, these knobs are made of ABS or aluminum with nickel-plated brass bushings and reinforced shaft holes to suit most round or flattened shafts.

LISTED UNDER: Knobs | Handles and Knobs

Laser Modules With Integral Thermo Electric Control

March 11, 2008 10:05 am | Product Releases | Comments

Two 532 nm DPSS high visibility green laser modules from SANYO&#151the DLX-9356-13 (532nm, 5mW) and the DLX-9456-02 (532nm, 10mW)&#151are available. The modules, measuring just 20 mm diameter by 50.

LISTED UNDER: Lasers

High Density Switcher Supplies 160 W in Compact Package

March 11, 2008 10:05 am | Product Releases | Comments

The VMS-160 series of high density, medically approved open frame switching power supplies outputs 160 W with 200 LFM forced air cooling or 100 W under convection-cooled conditions. This translates to a power density of 18 W/in 3 in a 1U, industry standard, 2 inches x 4 inches footprint.

LISTED UNDER: Power Supplies

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading