Advertisement

Twin Rod Air Cylinders

May 8, 2007 11:29 am | Humphrey Products Company | Product Releases | Comments

These twin rod air cylinders are a cost-effective means of achieving precise, non-rotating linear motion. The twin rod design has less than 1/3 of a degree of rotation, allowing precise rod alignment and virtually eliminating rod endplay for guided linear motion.

LISTED UNDER: Cylinders | Cylinders

Image Stabilization System

May 8, 2007 11:29 am | Energen Inc | Product Releases | Comments

This image stabilization system consists of a gyrosensor that measures vibration, a lens assembly with a CCD, a digital signal processor, and resident software to provide fully automatic operation.

LISTED UNDER: Displays

Battery Management System

May 8, 2007 11:29 am | Oceanserver Technology, Inc | Product Releases | Comments

The Intelligent Battery and Power System serves as a complete AC/DC power supply and provides clean, regulated DC, sourced from Li-Ion battery packs, an AC wall outlet, or any external DC source including solar and wind power.

LISTED UNDER: Power Supplies | Power Supplies | Batteries
Advertisement

Non-Magnetic Rigid Chain

May 8, 2007 11:29 am | Serapid | Product Releases | Comments

The RigiBelt is made of reinforced plastic and stainless steel. The chain comes together much like a zipper to form a column. It moves quickly and quietly while telescoping in and out, and is stored in a compact magazine. The actuator can be used for any kind of positioning in medical equipment.

LISTED UNDER: Actuators | Actuators | Actuators

Rotary Position Sensor

April 17, 2007 11:43 am | Bei Technologies Inc | Product Releases | Comments

The 9950 non-contacting rotary position sensor incorporates all the proven performance characteristics of the company’s dual Hall effect sensors, including the durability of non-contacting technology and EMI capabilities, into a single analog output, lower-cost, and more compact package.

LISTED UNDER: Others

Dual-Gas Sensor

April 17, 2007 11:43 am | Sensor Electronics Corporation | Product Releases | Comments

A new dual-gas&#151EtO plus H 2 O&#151sensor has earned CSA Approval for hazardous applications. This explosion proof sensor gives precise readouts of both gases simultaneously.

LISTED UNDER: Sensors

Power Filters (4043)

April 12, 2007 11:59 am | Sola/Hevi-Duty | Product Releases | Comments

The STF Series of Active Tracking Filters are designed to safeguard medical equipment against damaging low-energy voltage transients and high-frequency noise. The filters continuously track the input AC power line at all locations on the sinewave and instantaneously counter noise.

LISTED UNDER: EMI/RFI Filters

Touch Sensing ICs

April 10, 2007 8:08 am | Omron Electronic Components, LLC | Product Releases | Comments

The B6TS application-ready touch sensing IC family of products measures floating capacitance through most touch panel materials.

LISTED UNDER: Input Devices
Advertisement

Power Filters

April 10, 2007 8:08 am | Sola/Hevi-Duty | Product Releases | Comments

The STF Series of Active Tracking Filters are designed to safeguard medical equipment against damaging low-energy voltage transients and high-frequency noise. The filters continuously track the input AC power line at all locations on the sinewave and instantaneously counter noise.

LISTED UNDER: EMI/RFI Filters

Power Entry Module (4029)

April 10, 2007 8:08 am | Schurter, Inc. | Product Releases | Comments

This power entry module, series 5707, advances the range of applications in the area of detachable power. It offers an alternative to makeshift accessories often used to prevent particles or liquids from entering the appliance.

LISTED UNDER: Plugs and Receptacles

Battery Charger

April 9, 2007 5:56 am | Product Releases | Comments

The LC Series of battery chargers are designed specifically for Lithium-ion (Li-ion) and Lithium-polymer (Li-polymer) batteries. They feature the ability to be tailored to the unique charging requirements of each application.

LISTED UNDER: Power Supplies | Batteries

Thermal Printer Mechanism

April 9, 2007 5:56 am | Fujitsu Components America, Inc. | Product Releases | Comments

This high-speed, battery-powered, 4-inch thermal printer mechanism is designed for high-performance, portable label printing applications. The FTP-648MCL103/104 series features a 50 mm/sec print speed with 8 dot/mm (150 dpi) resolution to quickly output high-quality barcodes, graphics, and text.

LISTED UNDER: Printers

Mini DC/DC Converter

April 9, 2007 5:56 am | Bear Power Supplies | Product Releases | Comments

The BPS Series high-voltage DC/DC converters feature up to five times better efficiency and ten times better load regulation than similar products on the market. These high-reliability isolated 1.5 W converters are ideal for powering PIN diodes and APDs.

LISTED UNDER: Transformers/Converters/Conditioners

Implantable Medical Battery

April 9, 2007 5:56 am | Eaglepicher Medical Power | Product Releases | Comments

The size and shape (cylindrical, 0.26 in. long x 0.09 in. diameter) of this implantable-grade medical battery enables a device so small that it can be deployed via a minimally-invasive catheter procedure rather than traditional implantation surgery.

LISTED UNDER: Batteries | Batteries

Miniature Profile Rail Guides

April 9, 2007 5:56 am | Skf Usa Inc. | Product Releases | Comments

Miniature profile rail guides offer ideal solutions for linear-motion systems where space for components may be limited.

LISTED UNDER: Guide Rollers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading