Advertisement

Pneumatic Products Catalog

September 7, 2006 5:12 am | Product Releases | Comments

MFD Pneumatics offers this 20-page pneumatic products catalog, focusing on product lines specific to the OEM’s low cost, quality component requirements.

LISTED UNDER: Cylinders | Control
Advertisement

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Millipore Corporation | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding

Servo Controller (3329)

August 25, 2006 6:15 am | Quicksilver Controls, Inc. | Product Releases | Comments

The SilverDust IG8 communication options include RS232, RS485, CAN, and Ethernet. This multi-channel architecture allows for a network of field devices using CAN to work simultaneously with a supervisory network using RS232, RS485, or Ethernet.

LISTED UNDER: Motor Speed Controllers

Aluminum Gas Cylinders

August 25, 2006 6:15 am | Cyl-Tec, Inc. | Product Releases | Comments

Aluminum gas cylinders are available for medical O2 applications. The aluminum cylinders are as much as 50% lighter than traditional steel cylinders, making them easier to carry and handle.

LISTED UNDER: Other Supplies | Cylinders | Gas Valve

Ribbon Cable Assemblies

August 25, 2006 6:15 am | C&M Corp. | Product Releases | Comments

The MacroFlex Series of ribbon cable assemblies can be used in multiple applications requiring high performance ribbon cable assemblies, including board-to-board connections in medical electronic equipment.

LISTED UNDER: Wire and Cable | Cable Assemblies | Wire and Cable

Slotted Brushless DC Motors

August 8, 2006 12:51 pm | Danaher Motion | Product Releases | Comments

Portescap N Series slotted brushless DC motors are available in size 5, 6, 9, and 11&#151ideal for medical assembly applications where high speed is key&#151and in sizes 12, 14, and 15 for industrial applications where high torque is required.

LISTED UNDER: Brushless DC Motors

19 W External Power Family

August 8, 2006 12:51 pm | Ault, Inc. | Product Releases | Comments

A 19-watt family of external switch-mode power supplies are the first in a family of power devices that meets with the requirements of the EPA’s Energy Star program. The PW148 series is available in desktop or wall plug-in styles with a single output of 15 to 19.

LISTED UNDER: Power Supplies | Product Design

Free Form Sensing Points

August 8, 2006 12:51 pm | Sensor Products Inc | Product Releases | Comments

The Tactilus line of dynamic electronic pressure mapping systems has been expanded with the introduction of free form sensor systems. The systems consist of up to 16 individual sensing points that can detect pressures up to 60 PSI coupled with simple electronics and a USB interface.

LISTED UNDER: Others

Industrial EMI Filters

August 8, 2006 12:51 pm | Lambda | Product Releases | Comments

The MA and MX series EMI filters provide two levels of electrical noise attenuation in the

LISTED UNDER: EMI/RFI Filters

Cartridge Needle Valve

August 8, 2006 12:51 pm | Beswick Engineering Co., Inc. | Product Releases | Comments

This miniature cartridge needle valve is offered for precise flow adjustment in an extremely compact package. The product can be used to control mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications.

LISTED UNDER: Needle | Cylinders | Miniature Valve

Single Wire Conductors

August 8, 2006 12:51 pm | Interpower Corporation | Product Releases | Comments

Single wire HAR conductors are intended for use in making electrical connections in equipment for European countries. The single conductor wires are available in brown, blue, yellow/green, black, and red. They are available in sizes from a 0.

LISTED UNDER: Wire and Cable

Compliant Chip Fuse

August 8, 2006 12:51 pm | Schurter, Inc. | Product Releases | Comments

This IEC quick-acting (F) chip fuse series USI 1206, Universal Modular Fuse (UMF) is approved according to IEC 60127-4/2, and bears international approvals by cURus, METI, and CCC.

LISTED UNDER: Fuses/Surge Suppressors/Circuit Breakers

Optical Rotary Encoder

August 8, 2006 12:50 pm | Baumer Ltd. | Product Releases | Comments

The absolute multi-turn encoder and the incremental encoder in the company’s expanded line of offerings are designed to withstand strong shock and vibration in demanding end use environments.

LISTED UNDER: Encoders

Compact Module

August 8, 2006 12:50 pm | Bosch Rexroth Corporation | Product Releases | Comments

The performance of the Rexroth CKK and CKR compact modules is now available in a 200-mm wide extrusion utilizing two size 25 ball rail systems.

LISTED UNDER: Linear Motion Systems | Actuators | Actuators

Light-Duty Footswitch

August 8, 2006 12:50 pm | Custom Switches Inc. | Product Releases | Comments

The Series 600 footswitch features a 4 in. wide target that won’t tip when stepped on because it has an extended steel base and a non-skid pad for added stability.

LISTED UNDER: Switches/Pushbuttons | Cordsets/Power Cords

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading