Advertisement

Electricity Converting Film

September 10, 2007 9:46 am | Product Releases | Comments

This miniature, thin film thermoelectric generator (TEG) converts heat directly into electricity.

LISTED UNDER: Power Supplies

Flat Flexible Cable

September 10, 2007 9:46 am | Product Releases | Comments

Gold contact FFC/FPC connectors may be mated with flat flexible cable that contains a gold coating on the stripped ends for an extra measure of reliability in board-to-board interconnections.

LISTED UNDER: Wire and Cable | Wire and Cable

Inverters

September 10, 2007 9:46 am | Product Releases | Comments

SE/SE2 and E200II Series inverters for CCFL-backlit LCDs are vacuum-encapsulated to provide maximum reliability and excellent resistance to shock, vibration, and humidity.

LISTED UNDER: Power Supplies | Hand Held Instruments
Advertisement

Integrated Motor/Driver

September 10, 2007 6:54 am | Product Releases | Comments

The PRO Series NEMA 17 integrated motor/drivers are fitting for machine designs where an incorporated motor/driver helps conserve space. A 42 mm hybrid motor with attached drive electronics, yields a compact, RoHS compliant package.

LISTED UNDER: Drives

Modular Spindle Drives

September 10, 2007 6:54 am | Maxon Precision Motors, Inc. | Product Releases | Comments

The GP 22 S and GP 32 S gearheads, specifically adjusted for spindles, are designed to withstand high loads, and the special spindle intake means that customer-specific spindles can be assembled with ease in significantly less time.

LISTED UNDER: Drives

Brushless DC Motor (4363)

September 10, 2007 6:54 am | Product Releases | Comments

This compact high performance 8-pole brushless DC motor is well suited for applications where high torque to weight ratio and efficiency are important.

LISTED UNDER: Brushless DC Motors

Brushless DC Motor (4369)

September 10, 2007 6:54 am | Micromo | Product Releases | Comments

The Smoovy Series 0308…B version of the brushless DC motor line uses the “System Faulhaber” skewed winding in combination with a rotor made of Neodymium rare-earth magnets to provide cog-free motion. The bearing system of the Series 0308…B brushless DC motor is now composed of jewel bearings.

LISTED UNDER: Brushless DC Motors

Voltage-Controlled Oscillator

September 10, 2007 6:53 am | Product Releases | Comments

The CVCO55CW-1000-2000 VCO operates from 1 to 2 GHz with a control voltage range of 1~20V. This VCO features a typical phase noise of -100 dBc/Hz at 10 KHz offset and has excellent linearity. The model is packaged in the industry standard 0.5 x 0.5 in. SMD package.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics
Advertisement

Fuse Holders

September 10, 2007 6:53 am | Keystone Electronics Corp. | Product Releases | Comments

This high reliability and compact PC auto blade fuse holder is uniquely designed to accept standard and low profile ”mini-size fuses” and hold them in place after multiple insertions.

LISTED UNDER: Fuses/Surge Suppressors/Circuit Breakers

Diode Laser

September 10, 2007 6:53 am | Product Releases | Comments

The 2495-L3 Series 808 nanometer fiber-coupled diode laser incorporates new chip technology to provide a reliable and less expensive laser solution for many industrial, dental, and medical applications.

LISTED UNDER: Lasers

Linear Air-Bearing Stage

September 10, 2007 6:53 am | Product Releases | Comments

Leading edge manufacturing demands positioning tolerances beyond the capability of conventional ball-screw and mechanical-bearing positioning systems.

LISTED UNDER: Linear Motion Systems

Non-Contact Magentostrictive Sensor

September 10, 2007 6:53 am | Product Releases | Comments

This C-Series sensor is ideal for linear-position and liquid-level measurement in medical applications such as fluid collection and disposal, contrast injection fluid delivery, hospital bed motion, dental chair positioning, and patient mobility and accessibility equipment.

LISTED UNDER: Sensors

Fiber Optic Illuminator

September 10, 2007 6:53 am | Product Releases | Comments

The Fiber-Lite DC950H machine vision fiber optic illuminator is designed for machine vision integrators. It is a 150-watt quartz halogen regulated illuminator that has been improved to produce a higher output with greater reliability and is now RoHS compliant.

LISTED UNDER: Lamps and Lights

Wire and Ribbon

September 10, 2007 6:53 am | Product Releases | Comments

Precious metal clad wire and ribbon are metallurgically bonded to a core material, feature a smooth, consistent surface finish, are functionally equivalent to solid products, and cost considerably less.

LISTED UNDER: Wire and Cable

MRI-Compatible Syringe Pump Demonstrated

August 10, 2007 5:17 am | Product Releases | Comments

An MRI-compatible drug delivery pump based on New Scale Technologies Inc.’s piezoelectric Squiggle motor has been successfully demonstrated by researchers at Roswell Park Cancer Institute of Buffalo, NY.

LISTED UNDER: Piezoelectrics

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading