Advertisement

Ceramic Heaters

April 23, 2014 4:15 pm | Hotwatt, Inc. | Products

Ceramic heaters are a ceramic body encasing a resistance element and packed within magnesium oxide. Temperatures to 1300°F (705°C) for applications like copiers, dehumidifiers, glue guns, heat sealing tools, instrumentation, resisters, soldering and de-soldering equipment and valve heaters.

LISTED UNDER: Heating Elements
Advertisement

Band Heaters

April 23, 2014 4:13 pm | Hotwatt, Inc. | Products

Band heaters are used in multiple applications like cylinders, dies, drums, holding tanks, injections and blow molding machines, and Plastic Extruders as well as many other applications. The Hotwatt Standard Band Heaters are manufactured in one or two piece constructions with maximum inside diameters of 11 1/2" and 22 1/2" respectively. Three or more sections are employed when heaters of larger diameters are needed (as for blown film extrusion dies).

LISTED UNDER: Heating Elements

Tubular & Finned Tubular Heaters

April 23, 2014 4:12 pm | Hotwatt, Inc. | Products

Tubular & Finned Tubular heaters have built in resistance to impact, vibration, corrosion and temperature extremes. The heater is swaged, reducing the diameter of the sheath and compacting the insulation. This insures rapid heat transfer and holds the coil in position for forming. Many diameters, sheath materials and configurations are available.

LISTED UNDER: Heating Elements

Glasrope & Foil Heaters

April 23, 2014 4:11 pm | Hotwatt, Inc. | Products

Foil & Rope heaters are a self-contained one piece assembly. A resistance element is laminated between two layers of aluminum foil. This heater is ideally suited for area and surface heating applications. Operating temperatures up to 300º F (150º C). Sizes range from 1.25" to 60" wide with lengths of 4" and up. Glasrope heaters are flexible heaters available in various lengths, sheath materials and terminations. Operating temperatures up to 900º F (485º C).

LISTED UNDER: Heating Elements

Strip & Finned Strip Heaters

April 23, 2014 4:08 pm | Hotwatt, Inc. | Products

Stainless Steel Strip & Finned Strip heaters provide clean, dependable heat with sheath temperatures up to 1200º F (650º C) and watt densities up to 40 watts per square inch. Finned Strip heaters are available with aluminum or stainless steel fins. Mica Insulated Strip heaters are also available in various sizes.

LISTED UNDER: Heating Elements

Air Process Heaters

April 23, 2014 11:38 am | Hotwatt, Inc. | Products

Air Process Heaters are used for: Baking, Drying, Laminating, Metal Working, Packaging, Plastic Welding, Preheating, Sealing, Soldering, Shrink Fitting, and Synthetic Fabric Sewing. Air Process heaters will provide hot air and gas up to 1400º F (760º C) with infinite control by varying the voltage and air flow. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections. For easier installation, Hotwatt can supply male or female NPT threaded fittings, hose adaptors (entry only), flanges, or custom fittings to your specifications. We can also provide temperature sensing control.

LISTED UNDER: Heating Elements

Universal Vision Sensor

April 23, 2014 8:12 am | by MDT Staff | Balluff Inc. | Product Releases | Comments

Balluff’s new BVS Universal Vision Sensor truly does what others can‘t, including: 360° part position detection, defect finding, contour based counting and matching, bar code reading (linear and 2D DM) and OCV. It also includes a serial port...

LISTED UNDER: Optical | Sensors

6 Watt DC-DC Converter

April 22, 2014 8:13 am | by MDT Staff | Murata Power Solutions | Product Releases | Comments

Murata announces the NCM6 series of isolated 6 Watt single and dual output DC/DC converters from Murata Power Solutions. Accommodating up to an ultra wide 4:1 input range, these DC-DC converters are available in three nominal...

LISTED UNDER: Transformers/Converters/Conditioners

Board Mount Pressure Sensors

April 22, 2014 8:12 am | by MDT Staff | Product Releases | Comments

Honeywell announces its new Basic Board Mount Pressure Sensors, Compensated, Unamplified, TBP Series. These new sensors are designed for customers who require a simple, high quality, cost-effective, basic performance, mV output sensor...

LISTED UNDER: Pressure

2W DC/DC Converters

April 22, 2014 8:11 am | by MDT Staff | Micropower Direct Llc | Product Releases | Comments

Available now from MicroPower Direct, the MG200MHI series is a family of compact, 2W DC/DC converters fully approved to both EN 60950 and EN 60601. They are specifically designed to meet the stringent isolation, reinforced insulation... 

LISTED UNDER: Transformers/Converters/Conditioners

Heat Sinks

April 21, 2014 9:48 am | by MDT Staff | Product Releases | Comments

Crydom, a brand of Custom Sensors & Technologies (CST), announces the availability of 4 new Heat Sinks designed specifically for use with single, dual and 3-phase Solid State Relays. The new models, rated at 0.25, 0.36. 0.7, and 1.0 degrees C...

LISTED UNDER: Heat Exchangers

Thermal Interface Material

April 21, 2014 9:38 am | by MDT Staff | Product Releases | Comments

AI Technology, Inc. (AIT) introduces COOL-PAD CPR7154, a new class of thermal interface material that dispenses like a thermal pad, but performs with characteristics like that of a grease or gel when device temperatures increase to above 45°C...

LISTED UNDER: Heat Exchangers

Axial Lead Wirewound Resistors

April 21, 2014 9:21 am | by MDT Staff | Vishay Intertechnology, Inc. | Product Releases | Comments

Vishay Intertechnology, Inc. today introduced a new series of non-magnetic, non-inductive axial lead wirewound resistors with high power ratings to 12 W and high-temperature operation to +350 °C, which is ideal for high-end...

LISTED UNDER: Resistors

90-Degree PCB Connector System

April 21, 2014 9:14 am | by MDT Staff | Product Releases | Comments

ERNI has expanded its M12 wire-to-board connector product offering to include a center axis, PCB edge mounting connector that saves significant board space when compared to top mount right angle connectors. The M12 90-Degree PCB...

LISTED UNDER: Connectors

USB 3.0 Board Level Cameras

April 17, 2014 8:05 am | by MDT Staff | Baumer Ltd. | Product Releases | Comments

New board-mount models allow greater flexibility in cramped installation spaces Baumer further develops the MX camera series by adding the fast USB 3.0 interface and additional performance features, increasing added value for users in industrial image...

LISTED UNDER: Camera

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading