Advertisement
Electronic Components

19" Modular Managed Gigabit Ethernet Switch

April 22, 2015 3:48 pm | by Men Micro, Inc. | Product Releases | Comments

MEN Micro’s robust NH30 29-Gigabit Ethernet switch offers carrier grade Layer 2 and Layer 3 VLAN routing capabilities The pre-configured CompactPCI Serial NH30, which comes in a half 19-inch format, is an additional member of the modular...

LISTED UNDER: Switches/Pushbuttons | Ethernet/Internet Connectivity Devices

LVDT Sensors

April 22, 2015 10:39 am | by Hoffmann+Krippner Inc. | Hoffmann+Krippner Inc. | Product Releases | Comments

Hoffmann – Krippner Inc. now offers a wide range of LVDT sensors from its German partner company INELTA for contactless and wear-free path and position detection. The LVDT sensors operate on the principle of the differential transformer...

LISTED UNDER: LVDTs | Others | Position

1W DC-DC Converters

April 22, 2015 9:38 am | by XP Power | XP Power | Product Releases | Comments

XP Power today announced three SIP packaged 1 Watt DC-DC converters with both single and dual output models. Aimed at applications requiring a high performance DC-DC converter, the products feature industry standard pinouts and offer an increased efficiency, higher isolation...

LISTED UNDER: Transformers/Converters/Conditioners
Advertisement

Brushless Motors Specifications Guide

April 21, 2015 6:37 pm | by Crouzet Motors | Product Releases | Comments

Crouzet Motors has released a new 20 page specifications guide covering two series of its high performance DCmind Brushless Motors and gearmotors, all featuring integral electronic controls for industrial, medical, mass transportation and alternative energy applications...

LISTED UNDER: Brushless DC Motors

Multi Wheel Encoder

April 21, 2015 3:38 pm | by Elma Electronic | Product Releases | Comments

Elma Electronic Inc. now offers a miniature rotary encoder that includes an illuminated 8+1 joystick, enabling seamless, accurate control using just one finger. The new Multi Wheel Encoder features Hall effect sensed incremental encoder output and 12 detents with magnetic indexing to ensure proper alignment and positioning...

LISTED UNDER: Encoders

Two-Inch Wide Caster

April 21, 2015 10:39 am | by Caster Concepts | Product Releases | Comments

Caster Concepts has launched TWERGO Lite, the ultimate two-inch wide caster capable of carrying a heavy load without causing a strain on the body or the bank account. TWERGO Lite achieves an average of 20 percent reduction in initial push force on loads totaling 2600 pounds...

LISTED UNDER: Guide Rollers

Electro-Mechanical Box Build

April 21, 2015 10:38 am | by Aved Electronics, Inc. | Product Releases | Comments

Custom engineered, sourced, and manufactured electro-mechanical box build assemblies and integrated interconnecting cables for early stage companies are being introduced by Aved Electronics, Inc. of North Billerica, MA. Aved Electro-mechanical Box...

LISTED UNDER: Electromechanical/Mechanical Devices | Cable Assemblies

Ethernet Cabling System

April 17, 2015 11:10 am | by HARTING North America | HARTING North America | Product Releases | Comments

HARTING’s newly released Ha-VIS preLink is an ingenious, Ethernet cabling system for the full gamut of industrial applications. It is based on the simplicity of a termination block the user wires separately, then snaps securely into any one of seven mating profiles...

LISTED UNDER: Ethernet/Internet Connectivity Devices
Advertisement

Inverter Power Supplies

April 16, 2015 4:14 pm | by Amada Miyachi America | Product Releases | Comments

Miyachi America Corporation, a leading manufacturer of laser welding, laser marking and micro machining equipment and systems, announces its new IS-800CR and IS-1400CR mid-frequency inverter power supplies. These new power supplies are perfect for a wide range of aerospace, electronic automotive, battery, and appliance applications, including commutator fusing, copper wire to...

LISTED UNDER: Power Supplies

4-Channel Frame Grabber

April 16, 2015 2:13 pm | by Sensoray | Sensoray Company | Product Releases | Comments

Sensoray announces its new Model 2255 4-channel frame grabber, which captures uncompressed frames from four National Television System Committee (NTSC) or Phase Alternation by Line (PAL) video sources and sends them over USB 2.0 to a host computer. Frames are captured simultaneously from all channels. With exceptionally low latency...

LISTED UNDER: Displays

21.3” QXGA LCD with Super Fine TFT2

April 16, 2015 12:13 pm | by Tianma NLT America, Inc. | Tianma NLT America, Inc. | Product Releases | Comments

Leading LCD supplier Tianma NLT America is introducing a new 21.3” diagonal QXGA (Quad Extended Graphics Array) LCD prototype that features quantum dot technology with NLT Technologies’ proprietary new SFT2 (Super Fine TFT2) technology. SFT2 is NLT’s proprietary...

LISTED UNDER: Displays

Clamshell Spring Pin Socket for Power Transistors

April 15, 2015 8:00 pm | by Ironwood Electronics, Inc. | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics recently introduced a new QFN socket addressing high performance requirements for testing power transistor - CBT-QFN-7043. The contactor is a stamped spring pin with 19 gram actuation force per ball and cycle life of 125,000 insertions. The self inductance...

LISTED UNDER: Sockets

Motion Controller Chips

April 15, 2015 2:51 pm | by Nippon Pulse America, Inc. | Product Releases | Comments

Nippon Pulse has released its newest series of motion controller chips, the PCL61x4 Series. PCL61x4 is a series of two high-performance servo/stepper controller chips: the PCL6114 single-axis chip and the four-axis PCL6144 chip. The PCL61x4 series has some improved features over...

LISTED UNDER: Integrated Circuits | Motor Speed Controllers

LED Light Guide

April 15, 2015 11:18 am | by Global Lighting Technologies ( Glt), Inc. | Product Releases | Comments

Global Lighting Technologies (GLT), developer of edge-lit, LED-based light guides for general illumination, has introduced a new 4” x 4” LED-based light guide developed to demonstrate its efficiency, durability, long life, and low cost. GLT’s LED-based 4” x 4” square...

LISTED UNDER: Lamps and Lights

Photo Etch Specialty Stainless Steel

April 14, 2015 12:38 pm | by Tech-Etch, Inc. | Tech-Etch, Inc. | Product Releases | Comments

Tech-Etch manufactures precision thin metal parts from specialty stainless steel alloys like MP35N used in implanted medical devices, Elgiloy used in replacement heart valves, as well as 716 and 420 alloys used for surgical blades. Tech-Etch uses the photo etching process to,...

LISTED UNDER: Electromedical Contract Manufacturing | Seals and Gaskets | EMI/RFI Shielding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading