Pull Test Device for Measurement

August 12, 2008 8:14 am | Product Releases | Comments

PullTester 20 is a motorized, bench-top unit designed to measure pull-test forces for a variety of applications. The most common are wire crimp and ultrasonic metal welding connections. Standards specify that the device pulls at a consistent rate.

LISTED UNDER: Measurement Instruments

Six Micron Measurement System

February 15, 2008 10:10 am | Lumetrics Inc. | Product Releases | Comments

Manufacturers of precision medical components such as coated stents, balloons, and catheters require diligent quality control to ensure uniform thickness of these products. The DI-6 OptiGauge, a non-contact optical measurement system, can gauge coatings and walls down to six microns thick.

LISTED UNDER: Measurement Instruments

Hand-Held Scale

September 10, 2007 6:53 am | Product Releases | Comments

The OHAUS HH320 hand-held scale operates on two AAA alkaline batteries, has a sealed keypad with buttons for on/off, weighing units, zero, and backlighting the large LCD display. Featuring a 320 gm capacity with 0.1 gm readability and &#1770.

LISTED UNDER: Measurement Instruments

Photomultiplier Tubes

September 10, 2007 6:53 am | Product Releases | Comments

The R9800, R9420, and R9779 photomultiplier tubes (PMTs) each feature an extremely short transit time spread that is uniform across the entire effective area of the photocathode. The photocathode is bialkali material with a spectral response range of 300 to 650 nm.

LISTED UNDER: Measurement Instruments

Load Cells

May 8, 2007 11:29 am | Product Releases | Comments

A family of load cells will allow design engineers to use direct force measurement in many OEM applications where the technology had previously been too expensive. Microfused load cells are manufactured at a fraction of traditional cost.

LISTED UNDER: Measurement Instruments

Surface Finish Gage

April 9, 2007 5:56 am | Product Releases | Comments

The Pocket Surf PS1 portable surface finish gage weighs in at just 14 oz and can measure more than 24 surface finish parameters with its high resolution inductive probe.

LISTED UNDER: Measurement Instruments


January 18, 2007 11:36 am | Product Releases | Comments

The MarForm MMQ 400 formtester is a ground up design that is robust, less sensitive to environmental influences, fast, flexible, and accurate.

LISTED UNDER: Measurement Instruments

Load Cell

January 18, 2007 11:36 am | Product Releases | Comments

The LCB500 is designed for possible use as a rod end load cell with mounting plates. This tension/compression load cell is typically used in inline actuators and hydraulic jacks with male/female threads.

LISTED UNDER: Measurement Instruments | Actuators | Actuators

Coordinate Measuring Machine (3341)

September 6, 2006 7:11 am | Product Releases | Comments

The Contura G2 coordinate measuring machine provides a particularly affordable means of entering the world of scanning technology for production and progress inspection of single processing stages.

LISTED UNDER: Measurement Instruments

Telecentric Measuring Lenses

September 6, 2006 7:10 am | Edmund Optics | Product Releases | Comments

TML-HP (high power) telecentric measuring lenses correct perspective errors that yield variations in magnification through the depth of field. Therefore, these lenses are ideal for both on-line and off-line production environments that require accurate measurements.

LISTED UNDER: Measurement Instruments

Measurement System (3301)

August 8, 2006 12:51 pm | Product Releases | Comments

The MMQ 34 Formtester measures roundness, cylindricity, straightness, flatness, concentricity, coaxiality, radial run-out, total radial run-out, axial run-out, total axial run-out, parallelism, perpendicularity and angularity.

LISTED UNDER: Measurement Instruments

Internal Form and Finish Critical to Manufacture of Heart Pump

August 4, 2006 7:17 am | Product Releases | Comments

The Project: Verify that geometry and surface texture of the housing for a heart pump will facilitate smooth functioning while not adversely affecting blood. The Solution: Use extremely accurate instrumentation to measure form and surface to ensure they are compliant with specifications.

LISTED UNDER: Measurement Instruments | Biocompatibility Testing | Microbiology/Chemical Testing

UV-C Detector

July 18, 2006 6:27 am | Product Releases | Comments

The low drift solid-state ROD-360-UV18 detector has been developed specifically for the measurement of effective ultraviolet germicidal irradiance applied in air and water sterilization applications employing low and medium pressure Hg or pulsed Xenon lamps.

LISTED UNDER: Measurement Instruments

Coordinate Measuring Machine (2983)

April 18, 2006 6:57 am | Product Releases | Comments

The Legex 574 CNC coordinate measuring machine combines state-of-the-art design, electronics, computing, sensors, and materials to offer substantially enhanced performance while at the same time providing a significant price advantage.

LISTED UNDER: Measurement Instruments

Measuring Unit

March 9, 2006 12:10 pm | Product Releases | Comments

With an industry leading ultra-low measuring force of 0.01 N (1 gf), Litematic high resolution precision digital contact instruments are ideally suited for high precision measurement of fragile, easily deformable workpieces. The instruments offer an extremely high resolution of 0.01/0.1/1.

LISTED UNDER: Measurement Instruments


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.