Advertisement
Other Testing Instruments

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable
Advertisement

NIR Spectrometer System

February 20, 2015 12:03 pm | by Krohne, Inc. | Product Releases | Comments

KROHNE, Inc. announces its new SpectroBAY process near-infrared (NIR) spectrometer system for efficient process control in the chemical industry. Improving chemical plant reliability and profitability through automated control, the SpectroBAY system is ideal for a range of applications, including fluids...

LISTED UNDER: Analyzers | Gauges, Meters, Monitors | Other Testing Instruments

Fully Automated WVTR Testing System

September 30, 2014 8:30 am | by MDT Staff | Mocon, Inc. | Product Releases | Comments

MOCON, Inc. is unveiling the first-ever, fully-automated water vapor transmission rate (WVTR) testing system for packaging and other barrier structures, the PERMATRAN-W Model 3/34 G. (WVTR is the steady state rate at which water vapor permeates through

LISTED UNDER: Other Testing Instruments | Product-Safety/Performance Testing

Energy Reduction Test Time Saver

September 9, 2014 8:30 am | by MDT Staff | Compliance West USA | Product Releases | Comments

Compliance West is pleased to introduce the D5-PF, specifically designed to provide a numeric display of the joules consumed in the energy reduction test, saving test time and ensuring accuracy...

LISTED UNDER: Other Testing Instruments | Product-Safety/Performance Testing

Compact RTS Production System, for Assembly and Testing

August 6, 2014 3:25 pm | by MDT Staff | Product Releases | Comments

At P-MEC 2014, Teamtechnik will be presenting production system platforms capable of taking on challenges ranging from start-up to high-speed manufacturing of medical devices...

LISTED UNDER: Automation Equipment | Process-Control Equipment | Robotic Systems

LabStrong Fi-Streem Water Distillation Systems

July 25, 2014 11:20 am | LabStrong Corporation | Products

Of all the water purification technologies available, distillation can remove a wider range of impurities than any other single form of water purification. LabStrong Fi-Streem Stills consistently produce high quality ASTM Type II water and can remove inorganic ions, dissolved gases, organics, particles, bacteria and pyrogens from water. LabStrong Fi-Streem Water Stills will meet your laboratory water needs while remaining budget-friendly.

LISTED UNDER: Other Testing Instruments
Advertisement

Liquid Cooled Electronic Load Series for Advanced Load Testing

June 3, 2014 12:34 am | by MDT Staff | Product Releases | Comments

Schaefer has unveiled the Second Generation of the LW 5100 Series of liquid cooled electronic loads featuring user-friendly touch screen panel and enhanced functionality. These built-to-project loads are housed in a compact case that provides high power density and ease of use...

LISTED UNDER: Other Testing Instruments

Prostat Electrostatic Testing and Measuring Instruments

May 1, 2014 3:15 pm | Prostat Corporation | Products

Prostat Corporation manufactures static measuring, testing and auditing instruments including the PRS-801 Resistance System, CVM-780 Contact Voltmeter, PGA-710 Autoanalysis System, PRS-812 Resistance Meter, PFK-100 Field meter set and the Q007 ESD Grounding Cube.

LISTED UNDER: Meters | Hand Held Instruments | Other Testing Instruments

Electrical Safety Compliance Test Systems

April 4, 2014 8:17 am | by MDT Staff | Product Releases | Comments

Announced today by Slaughter Company, Inc. is the release of their new line of electrical safety test systems that will perform the four most common safety tests, AC Hipot, DC Hipot...

LISTED UNDER: Analyzers | Other Testing Instruments | Product-Safety/Performance Testing

High Capacity Tension, Compression Force Tester

February 13, 2014 4:56 pm | by MDT Staff | Product Releases | Comments

Mark-10 has introduced their new Model ESM1500 force tester, a highly configurable single-column force tester for tension and compression measurement applications up to 1,500 lbF (6.7 kN). Suitable for laboratory and production environments, the ESM1500 may be used with an indicator-load cell combination or with a force gauge...

LISTED UNDER: Other Testing Instruments

Oxygen Transmission Rate Test System for Ultra-high Barrier Applications

January 14, 2014 10:36 am | by MDT Staff | Mocon, Inc. | Product Releases | Comments

MOCON has developed a new oxygen transmission rate test instrument which accurately and repeatedly measures barriers to 5x10-4 cc/ (m2 x day), ten times lower than previous levels. The OX-TRAN Model 2/21 10x system measures films or packages at precise temperature and relative humidity conditions.

LISTED UNDER: Other Testing Instruments

Economical 150MHz AWG Signal Generator

November 11, 2013 2:43 pm | by MDT Staff | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the AG4151 - an economical, feature-rich, dual-channel multi-function generator which combines arbitrary waveform and function generation using Direct Digital Synthesizer (DDS) technology to provide stable, precise, low distortion signals at up to 150MHz.

LISTED UNDER: Oscilloscope | Other Testing Instruments

Long Range Indicator Calibrator

November 11, 2013 1:46 pm | by MDT Staff | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal has introduced a new long range indicator calibrator, the OPTIMAR 25. A precision benchtop instrument, the OPTIMAR 25 can be used for the calibration of a wide variety of precision measuring instruments. Accurate to ±10 µin. (±0.3 µm) over its full 0 - 1 in. (25 mm) range...

LISTED UNDER: Measurement Instruments | Other Testing Instruments

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading