These Force Gauges combine a rugged, compact design to provide a complete force testing instrument...
North Star Imaging Inc. (NSI) manufactures industrial 2-D digital x-ray and 3-D x-ray computed...
These advanced motorized, programmable force test stands combined with our line of top quality...
Announced today by Slaughter Company, Inc. is the release of their new line of electrical safety test systems that will perform the four most common safety tests, AC Hipot, DC Hipot...LISTED UNDER: Analyzers | Other Testing Instruments | Product-Safety/Performance Testing
Reference Conical fittings/Gauges with a 6% (Luer) taper are designed and manufactured according to ISO 594-1:1986 & ISO 594-2:1998 for testing the Syringes, Luer Hub: Needles, Catheters, Filters, Adaptors, Connectors and certain other medical equipments including Infusion Set, Transfusion Set & Three Way Stopcock.LISTED UNDER: Gauges, Meters, Monitors | Product-Safety/Performance Testing
Heidenhain is now providing the most comprehensive line of inspection and gauging products available today. Products are available for both end-users and OEMs alike. Ranging from in-process fixture inspection requiring multiple gauging configurations, to 2-D and 3-D inspection machine encoders and digital readouts...LISTED UNDER: Analyzers | Coordinate measuring machine | Gauges, Meters, Monitors
These advanced motorized, programmable force test stands combined with our line of top quality force gauges; provide a complete force measurement system capable of handling the most precise testing applications. Programming capabilities provide the versatility to tackle a multitude of applications. Two modes of operation, single or continuous cycling allow for a single precise test or repetitive, consistent results. User selectable high and low force set points through RS232 interface or directly through the force gauge allows the test stand to stop at specific force loads while displaying and outputting the displacement.LISTED UNDER: Measurement Instruments | Product-Safety/Performance Testing | Seal-Strength Testing
These Force Gauges combine a rugged, compact design to provide a complete force testing instrument and are utilized in a variety of applications such as, incoming quality inspection, finished goods testing and R&D. On-board statistical calculations provide fast access to max., min., ave. and standard deviation data. Units include the free software and USB cable allowing further data analysis on a PC. The 1,000 point memory allows for data exporting in real time or after testing is complete. In addition, the RS-232C and analog outputs provide maximum communication flexibility. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable both compression and tension applications in any direction.LISTED UNDER: Gauges, Meters, Monitors | Hand Held Instruments | Measurement Instruments
The Series FGS-100E vertical, motorized force test stands combined with the SHIMPO line of superior quality force gauges create a complete force measurement system capable of handling the most precise testing applications. The test stand’s all steel construction makes them remarkably rugged while performing with precision, providing the reliability to tackle a multitude of applications. The FGS-100E’s possess simplified operation with their 7 button key-pad and emergency stop button, eliminating lengthy training typical of similar test stands. With four modes of operation (manual, jog, single cycle, continuous) various single tests or repetitive tests can be achieved and selected with the push of a button.LISTED UNDER: Measurement Instruments | Product-Safety/Performance Testing | Seal-Strength Testing
Compliance West USA, a leading provider and manufacturer of hipot and surge testing equipment, announced the introduction of its Megapulse D5-P:2011 V2, an upgraded version of its surge tester designed to meet and exceed new industry requirements in IEC 60601-2-25:2011 and -27:2011.LISTED UNDER: Product-Safety/Performance Testing
Polymicro Technologies, a subsidiary of Molex Incorporated, has successfully developed a broad spectrum optical fiber with a low -OH pure silica core that demonstrates significantly reduced content of UV defects and other UV absorption centers.LISTED UNDER: Fiber Optics | Wire and Cable | Other Testing Instruments
Instron, a leading provider of testing equipment solutions designed to evaluate mechanical properties of materials and components, introduces the BioCoat: a polyurethane protective cover designed for Instron Series 5940 single column testing systems.LISTED UNDER: Measurement Instruments | Other Testing Instruments | Product-Safety/Performance Testing
MOCON, Inc., the world’s leading manufacturer of package integrity instrumentation, is announcing three new accessories for its breakthrough OpTech® oxygen test system for food and pharmaceutical applications.LISTED UNDER: Analyzers | Measurement Instruments | Product-Safety/Performance Testing
North Star Imaging Inc. (NSI) manufactures industrial 2-D digital x-ray and 3-D x-ray computed tomography systems. The company is a leading American manufacturer of x-ray/CT systems and also provides services, training, and other NDT equipment. NSI's inspection services group provides x-ray scanning services for product development, failure analysis, rapid prototyping, 3-D metrology, QA/QC, and more.LISTED UNDER: Measurement Instruments | Other Testing Instruments | Product-Safety/Performance Testing
Recent empirical testing of FerriShield Ferrites shows that there is a notable increase in Ohms of impedance when compared to the exact same competitive alternative.LISTED UNDER: Ferrites | Product-Safety/Performance Testing