Advertisement

Injection Press

December 10, 2007 9:53 am | Product Releases | Comments

The G9 Series of injection presses for rubber, TPE, and LSR products has been expanded. The showcase machine in this new generation is the V79, a 550-ton press with advanced design features in the mechanical, electronic, and hydraulic construction aspects.

LISTED UNDER: Molding Equipment

Engineered Purging Compounds

March 12, 2007 1:25 pm | Product Releases | Comments

One of 10 engineered purging compounds in the complete line of Dyna-Purge products, the enhanced formulation of Dyna-Purge M provides dual-scrubbing action to purge faster and clean more effectively than other types of commercial purging products.

LISTED UNDER: Molding Equipment

Membrane Resin Dryer

March 12, 2007 1:23 pm | Product Releases | Comments

A membrane resin dryer is available in models designed especially for injection molders of micro and precision components for medical devices. The company’s NovaDrier system dries virtually any type of resin. Throughput capacities of 7 to 150 lbs.

LISTED UNDER: Molding Equipment
Advertisement

Dryers

September 7, 2006 8:32 am | Product Releases | Comments

A complete line of high-performance, four-bed dryers (HP4-X) are designed specifically for the medical products industry. Because cleanliness is critical in this field, extra precautions have been taken to eliminate contamination from rust or corrosion during the drying process.

LISTED UNDER: Molding Equipment

Blender

September 7, 2006 5:49 am | Product Releases | Comments

While the MicroPlus blender accommodates processing machine throughputs of 100 to 350 pounds per hour instead of the 100-pound maximum of the widely used MicroBlender, it provides the same user-friendly features for reducing downtime during color or job changeovers.

LISTED UNDER: Molding Equipment | Flow

Vertical-Vertical Injection Machines

July 7, 2006 8:43 am | Product Releases | Comments

Magna V vertical-insert injection molding machines are offered in a vertical-vertical configuration for process-specific situations, resulting in significant increases in productivity.

LISTED UNDER: Molding Equipment | Injection Molding

Electric Injection Molding Machine (3159)

July 7, 2006 8:43 am | Product Releases | Comments

The MEtII series all-electric injection molding machine further responds to demands for high precision, high cycle molding. As in its predecessor, the MEt, a variety of durable construction features enhance the precision of the MEtII Series.

LISTED UNDER: Molding Equipment | Injection Molding | Micro Molding

Automated IMM

July 7, 2006 8:43 am | Product Releases | Comments

This fully automated standard injection molding cell for small parts is the result of the cooperation between three highly specialized companies.

LISTED UNDER: Molding Equipment | Injection Molding | Insert Molding
Advertisement

Melt-Disk Hot Runner System

February 8, 2006 6:40 am | Product Releases | Comments

The Melt-Disk hot runner system provides simple, versatile horizontal hot tip processing for direct side gating applications. The key to Melt-Disk’s excellent processing performance is the controlled heating element on the disk portion that ensures optimal heat control in the gate area.

LISTED UNDER: Molding Equipment | Heating Elements

Injection Machine

August 9, 2005 6:56 am | Product Releases | Comments

Combining a rigid clamping system with high-pressure injection capability as standard features, both the 165 and 275 Roboshot models deliver the performance needed for tight tolerance molding with large molds and small shot sizes.

LISTED UNDER: Molding Equipment | Injection Molding

Blow Molding System

December 6, 2004 7:30 am | Product Releases | Comments

These turnkey co-injection blow molding systems are designed specifically to produce multiplayer bottles and packaging for medical/pharmaceutical applications.

LISTED UNDER: Molding Equipment | Injection Molding | Micro Molding

Electric Injection Molding Machine

November 2, 2004 5:41 am | Product Releases | Comments

The MEII series electric injection molding machine instantly reaches maximum injection speeds to accurately mold thin-wall and fine-precision parts. A belt-less electric injection drive servometer is behind the excellent performance of the MEII series.

LISTED UNDER: Molding Equipment | Injection Molding

Vacuum Rubber Injection Machine

September 3, 2004 5:50 am | Product Releases | Comments

Using the company's patented vacuum molding system, the Vacu-Jet&#153 Vacuum Rubber Injection Molding System eliminates or minimizes the entrapment of air or gases that cause defects in molded products.

LISTED UNDER: Molding Equipment | Injection Molding

Hot Runner Nozzles

March 4, 2004 5:50 am | Product Releases | Comments

Gate-Mate Lite offers an economical solution for thin-walled parts, direct part gating, and high-cavitation molding. Available in 10 nozzle lengths from 42 through 130 mm, Gate-Mate Lite is suitable for multi-cavity molds.

LISTED UNDER: Molding Equipment

Lifter System

December 4, 2003 7:07 am | Product Releases | Comments

D-M-E doubles undercut capability in plastic molds with the VectorForm&#153 Lifter System. An innovation of Takao Injection Mold Engineering, the innovative lifter system offers design flexibility to OEMs and mold designers.

LISTED UNDER: Molding Equipment

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading