Advertisement
Molding Systems

Liquid Injection Molding System

April 29, 2015 2:20 pm | by Shin-Etsu Silicones of America, Inc. | Product Releases | Comments

Shin-Etsu’s KEG-2000 series is supplied in two components, which are mixed in a 1:1 ratio to ensure easy and accurate blending with optimized physical and processing properties. Offering “Dynamic Viscosity”, KEG-2000 products exhibit higher viscosity under low shear...

LISTED UNDER: Molding Equipment | Molding Systems

Multi-Cavity Mold for Intricate Medical Devices

March 23, 2015 3:22 pm | by Eastman Chemical Company | Product Releases | Comments

Eastman Chemical Company and Prestige Mold Incorporated have collaborated to create a first-of-its-kind multi-cavity, hot runner mold for producing intricate medical parts. The specialty chemical company and precision mold manufacturer proactively created the 32-cavity mold specifically for...

LISTED UNDER: Molding Equipment | Molding Systems | Technology Development

Micro Vertical Injection Molding Machine

January 28, 2015 12:36 pm | by Sodick Plustech | Product Releases | Comments

Plustech, Inc., the North American branch of Sodick’s IMM Division, will be introducing the new HC03VRE Micro Vertical Molding Machine at NPE2015. Designed for the high-speed molding of precision micro parts, the HC03VRE achieves a dry cycle time of only 0.9 seconds. Short cycle times are made possible using a mold clamping system that closes and clamps in a single motion coupled with a bel...

LISTED UNDER: Molding Equipment | Molding Systems
Advertisement

Compact Dust and Fine Removal System

December 29, 2014 3:25 pm | by Size Reduction Specialists Corp. | Size Reduction Specialists Corp. | Product Releases | Comments

Size Reduction Specialists, known for the Bi-Cutter screenless granulator, announces the release of their latest DFS series Dust and Fine Removal System. The DFS Series is a line of innovative, compact dust and fine separation systems developed to enhance molding procedures by the removal of dust, powders and fines from regrind or v...

LISTED UNDER: Extrusion Equipment | Molding Equipment | Molding Systems

Standard and Custom Compression Molding

February 5, 2013 4:52 pm | by MDT Staff | Product Releases | Comments

Wabash MPI offers standard and custom compression molding, transfer molding, vacuum molding, ASTM, composite molding, laboratory and R&D presses, as well as a series of hydraulic, all electric and pneumatic compression presses.

LISTED UNDER: Molding Equipment | Molding Systems | Presses

Silicone Vulcanization Process

January 7, 2013 10:34 am | by MDT Staff | Product Releases | Comments

ENGEL North America will introduce their new UV vulcanization process for silicone molding at the upcoming Plastec West show, February 12th -14th, 2013 in Anaheim, CA. On display will be a 110 ton ENGEL emotion all-electric machine...

LISTED UNDER: Molding Equipment | Molding Systems | Silicone Molding

Cast Urethane Molding

March 16, 2012 5:58 am | Product Releases | Comments

RedEye On Demand, a rapid prototyping and direct digital manufacturing service provider, and business unit of Stratasys Inc., today announced it has added cast urethane molding...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Clean Room Liquid Silicone Rubber Molding and Assembly

February 22, 2012 5:22 am | Product Releases | Comments

Rogan Corporation, a leading molder of plastic components for more than seventy-five years, has added a 1,500 square foot new clean room to its manufacturing facility.

LISTED UNDER: Molding | Molding Equipment | Molding Systems
Advertisement

Metal Injection Molding

November 16, 2011 5:57 am | Product Releases | Comments

Parmatech Corporation, a leading provider of custom manufactured metal injection molding (MIM) components and services, announces that it will feature a range of its capabilities...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Metal Injection Molding and Micro-MIM

October 27, 2011 10:53 am | Product Releases | Comments

Advanced Powder Products, Inc. uses metal injection molding (MIM) and micro-MIM (µMIM) to produce precision parts for surgical, dental and implantation applications in a range of alloys...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Bondable LSR Overmolding Capability Demonstrated With a Free Widget

August 22, 2011 5:55 am | Product Releases | Comments

Rogan Corporation, a leading molder of plastic components for more than seventy-five years, is featuring its Bondable Liquid Silicone Rubber capability in a Free “WIDGET”...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Molding Services for Medical Device Components

June 15, 2011 7:07 am | Product Releases | Comments

The B. Braun OEM Division of B. Braun Medical Inc. offers injection molding, insert molding and over molding for the production and customization of medical device components.

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Custom Injection Molding, Dip Molding and Extrusion

June 2, 2011 11:32 am | Caplugs | Product Releases | Comments

Caplugs’ medical molding capabilities include custom injection molding, dip molding and Extrusion of a wide range of medical & FDA grade materials.

LISTED UNDER: Molding | Extrusion Equipment | Molding Equipment
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading