Advertisement
Rapid Prototyping Equipment

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable
Advertisement

MDX-40A CNC Mill/CNC Machine

May 9, 2013 5:25 pm | Roland DGA Corporation | Products

The Roland MDX-40A CNC machine combines the advanced capabilities of a Subtractive Rapid Prototyping® (SRP) system with the ease-of-use of a benchtop CNC mill to provide product engineers and designers with a powerful 3D milling device. Offered at less than half the cost of additive systems, MDX-40A CNC mill produces affordable and highly accurate prototypes from a wide variety of non-proprietary materials with greater precision and excellent surface finish. Unlike other CNC machines used for rapid prototyping, the compact design of the MDX-40A is the perfect fit for any office and classroom space. It can even function as a CNC engraving machine.

LISTED UNDER: Rapid Prototyping Equipment

MDX-540 Benchtop Milling Machines

May 9, 2013 5:23 pm | Roland DGA Corporation | Products

Any way you look at it - the MDX-540 Subtractive Rapid Prototyping (SRP) System is a winner. One of the fastest and most accurate rapid prototype machines on the market, the MDX-540 has a price tag that is less than half the cost of most additive systems. A 4-axis desktop CNC device, the MDX-540 is complete with powerful CAM software that quickly and easily produces everything from functional and snap-fit parts and prototypes to light metal molds and custom jewelry.

LISTED UNDER: Rapid Prototyping Equipment

Polymer Laminate Technology Enables Rapid Prototyping of Bio Microfluidic Devices

February 17, 2011 6:34 am | ALine Inc | Product Releases | Comments

ALine's Polymer Laminate Technology (PLT) enables rapid prototyping and volume manufacture of bio microfluidic devices. PLT allows lab-on-a-chip functionality, supporting the next generation of products...

LISTED UNDER: Rapid Prototyping Equipment | Prototyping | Laminates

Rapid Prototyping System

April 18, 2006 6:57 am | Stratasys, Inc. | Product Releases | Comments

The Arcam EBM S400 is a rapid manufacturing and prototyping system that makes 100% solid metal parts. The highly efficient system produces metal parts three to five times faster than other additive fabrication methods.

LISTED UNDER: Rapid Prototyping Equipment | Prototyping | Rapid Prototyping

3D Printer

February 6, 2006 10:29 am | Product Releases | Comments

ZPrinter 310 Plus creates the most detailed parts in its price class at high speed. It is an example of the company’s ongoing effort to incorporate high-end 3D printing capabilities into its entry-level products.

LISTED UNDER: Rapid Prototyping Equipment
Advertisement

Prototype Printer

July 5, 2005 6:08 am | Product Releases | Comments

The Spectrum Z510 full color system produces high-definition, full-color 3D prototypes quickly and affordably.

LISTED UNDER: Rapid Prototyping Equipment

Rapid Protyping System Transforms Hearing Aid Development

December 6, 2004 6:45 am | Product Releases | Comments

The Project: To design, optimize, and produce better fitting hearing aids in less time. The Solution: Use CAD/CAM and 3D computer imaging to create custom devices in audiologist offices. These images show various angles of two hearing aid shells. One shell is on top of the other.

LISTED UNDER: Rapid Prototyping Equipment | Prototyping | Rapid Prototyping
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading