Advertisement

StarFiber

May 13, 2014 4:18 pm | Rofin-Baasel, Inc. | Products

StarFiber laser sources provide nominal power rates of 100 watts to 600 watts at fundamental mode beam quality. They can be operated in the pulsed and cw mode. The laser sources providing extremely small spot diameters realize welding speeds which are much higher than those of systems - at the same time there is less power necessary and it comes to less heat input, depending on the application. There is a wide spectrum of aplications for fine laser cutting like in the medical device technology for cutting of implants.

LISTED UNDER: Welders

StarPulse

May 13, 2014 4:14 pm | Rofin-Baasel, Inc. | Products

The StarPulse laser sources (40 – 500 W) providing high pulse-to-pulse stability are ideal for laser welding of narrow seam geometries at high welding speeds – also for highly reflecting materials with high melting temperatures. High precision power output provides for pulse energies down to only few microns for micro welds of very fine components. StarPulse lasers featuring excellent beam quality are first choice for the use of direct beam technology with large processing fields and small weld spot diameters at the same time. An extensive fiber kit allows flexiblity in positioning laser source and processing workstation and thus easy integration into production lines.

LISTED UNDER: Welders

LED Flood System

May 12, 2014 8:37 am | by MDT Staff | Product Releases | Comments

Dymax Corporation has introduced the new BlueWave LED Flood System which offers greater intensity and uniformity, contributing to faster and more repeatable cure times. With LED’s instant on/off capability, there are no mechanical shutter...

LISTED UNDER: Adhesive-Curing Systems
Advertisement

IV Catheter Assembly Systems

May 2, 2014 12:16 pm | Kahle Automation | Products

Kahle offers a complete IV Catheter Assembly Systems for both Standard and Safety Catheters, customizing our equipment designs to accommodate any requirements our customers might have. With over 90 IV Catheter Systems installed worldwide our experience and Kahle’s proprietary state-of-the-art high speed Catheter Tip Forming and Vision Inspection Technology we guarantee 100% product quality.

LISTED UNDER: Assembly Equipment

Glass Syringes / Prefill Assembly Technology

May 2, 2014 12:12 pm | Kahle Automation | Products

Kahle’s roots in the glass industry allow for a greater understanding of the handling, assembly, and inspection of all types of medical glass components. Kahle has experience in all areas of the manufacture and processing of Glass Syringes and Cartridges, including but not limited to integrity inspections of the product, integration into Vial and Syringe barrel washing, Needle assembly and bonding to the glass barrel, in addition to any peripheral assembly of components that a particular product design may require i.e. safety or specialty device features.

LISTED UNDER: Assembly Equipment

Tubing Processing and Assembly Machines

May 2, 2014 12:09 pm | Kahle Automation | Products

Kahle's Tubing Assembly Machines are available in a variety of machine platforms at various output requirements. The equipment can be supplied as a dedicated machine to supply a single product configuration, the equipment can have tooling options to assemble several product codes and configurations, or utilizing robot integrated assembly systems, we can manufacture more than 1,000 configurations of a Tubing Set on a single production line. The equipment can be designed to accommodate micro bore and large diameter tubing utilizing processing for all types of medical tubing materials.

LISTED UNDER: Assembly Equipment

Syringe Assembly Machines

May 2, 2014 12:06 pm | Kahle Automation | Products

Kahle offers a complete line of Continuous Motion, Rotary, Indexing, and Linear Assembly Systems to accommodate any type of syringe design, whether it's a standard design or a syringe with automatic or passive safety features, an autodestruct or specialty syringe. The Kahle equipment can be designed to assemble and inspect the final product at output rates exceeding 1,000 parts per minute.

LISTED UNDER: Assembly Equipment

Needle Assembly Machines

May 2, 2014 12:01 pm | Kahle Automation | Products

Needle Assembly Machines Kahle Needle Assembly Systems are available in various machine configurations, depending on product design and assembly requirements. Kahle’s precision systems are capable of assembling in excess of 50 needles at a time for outputs exceeding 1,600 parts per minute. The proprietary Kahle Needle Feeding and Bevel Orientation Technology can process needle sizes up to 32 gauge without any risk of damage to the needle.

LISTED UNDER: Assembly Equipment
Advertisement

ROBAR

May 1, 2014 1:59 pm | Innovatum, Inc. | Products

ROBAR family of Medical Device data management, label management, printing and GUDID upload products

LISTED UNDER: 21 CFR Part 11 Compliance | Compliance Software | Identification Products

Programmable HPLC Column Chiller/Heater

April 30, 2014 8:11 am | by MDT Staff | Product Releases | Comments

Torrey Pines Scientific, Inc. announces its new EchoTherm Model CO50 Programmable HPLC Column Chiller/Heater. The CO50 has a temperature range from 4.0°C to 100.0°C readable and settable to 0.1°C. The PID control software...

LISTED UNDER: Area (Surface) Heater | Chillers/Coolers

Metrology Software

April 25, 2014 8:10 am | by MDT Staff | Heidenhain Corp. | Product Releases | Comments

Now available, the latest release of Heidenhain’s PC-based IK 5000 QUADRA-CHEK metrology software (version 3.0.3) provides advanced functionality for both new and used quality control inspection equipment.  The IK 5000 can be used to retrofit...

LISTED UNDER: Testing Software | Measurement Instruments | Optical Inspection

Ductless Fume Hoods

April 24, 2014 8:13 am | by MDT Staff | Product Releases | Comments

The new Purair 5 Ductless Fume Hoods from Air Science USA feature a high level of operator protection where routine work is being carried out. The units exceed OSHA, ANSI and all relevant international standards. The Ductless design eliminates...

LISTED UNDER: Fume Hood

Benchtop Bottle/Vial Filler

April 23, 2014 8:10 am | by MDT Staff | Dispense Works, Inc. | Product Releases | Comments

The Dispense Works RP Series Robotic system will streamline your manual filling and capping operations with one precise and affordable bench top package. This system requires no PC for operation, and provides all preprogrammed software...

LISTED UNDER: Dispensers/Fillers

Class 100 Cleanroom Cabinet Oven

April 9, 2014 4:04 pm | by MDT Staff | The Grieve Corporation | Product Releases | Comments

No. 869 is an electrically-heated 500ºF (~260ºC) Class 100 cleanroom cabinet oven from Grieve, currently used for curing medical rubber products at the customer’s facility.  Workspace dimensions of this oven measure 36”W x 36”D x 27”H.  15KW are installed...

LISTED UNDER: Ovens

3-Facet Single Edge Blades

April 1, 2014 10:18 am | by MDT Staff | Personna | Product Releases | Comments

The 3-Facet is designed to meet rigorous clean, safety and sharpness standards particularly for cleanroom applications such as catheter processing. The GEM blades’ precision ground third angle increases sharpness for a precise initial cut...

LISTED UNDER: Catheter Manufacturing Equipment

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading