Advertisement

Multi-Axis Robots

June 30, 2005 7:23 am | Rixan Associates/Mitsubishi Robotics | Product Releases | Comments

The compact and powerful RV-3S (6-axis) and RV-3SJ (5-axis) Series robots offer speeds of up to 5,500 mm/sec, repeatability of &#1770.02 mm, a reach of 641 mm, and an improved range of motion over previous models. Cleanroom versions are available.

LISTED UNDER: Robotic Systems
Advertisement

Analysis Software

May 31, 2005 6:29 am | Solidworks Corporation | Product Releases | Comments

Cosmos 2006 software’s combination of new functionality and ease-of-use enables companies to improve their processes with time- and cost-saving analysis from a design’s inception right up to production.

LISTED UNDER: Validation Software

New Orthopedic Solution

May 31, 2005 6:12 am | Wright Medical Technology | Product Releases | Comments

Providing a fast cure for a common problem, Wright Medical Technology created an intramedullary fixation device for distal radius fractures in just nine months. This exclusive article takes a look at the technology behind this innovative design.

LISTED UNDER: Product Design & MFG Software | Casting

Laminar Flow Benches

May 3, 2005 8:23 am | Clean Air Products Corp. | Product Releases | Comments

Series 204 Horizontal Laminar Flow Clean Benches include an internal motorized filter unit for full filter coverage, and three-side access for easy cleaning. They come in several sizes ranging from two-by-two feet to two-by-six feet.

LISTED UNDER: Laminar Flow Hood

Automation System

May 3, 2005 8:23 am | Bosch Rexroth Corporation | Product Releases | Comments

Easy-2-Combine is the solution for multi-axis automation tasks with individual components that can be combined in simple, time-saving assembly steps. This means that the most common applications in assembly technology can now be done with standardized interfaces.

LISTED UNDER: Automation Equipment

Adhesive Dispense System

May 3, 2005 8:23 am | Product Releases | Comments

Each of the three Loctite Meter Mix Dispense Systems feature fixed and variable ratio units that can be customized with accessories to meet specific end user requirements. For precise ratio dispensing, the Loctite 1000 System features two positive displacement piston pumps.

LISTED UNDER: Adhesive Dispensers

MDT Exclusive: UV Curing System

May 3, 2005 8:13 am | Electro-Lite Corp. | Product Releases | Comments

The LED-100 is a UV curing system powered by an advanced light emitting diode that has an output of 600 mW/cm 2 at 365 nm. The compact hand held unit operates from a battery or from a 100-240 AC source.

LISTED UNDER: Adhesive-Curing Systems

Laser Coding System

May 3, 2005 8:13 am | Videojet Technologies Inc. | Product Releases | Comments

The Focus S25 laser coding system offers quality printing for applications that require clean, permanent coding at high production speeds. This high-resolution laser printer marks onto paperboard packaging, claycoat or secondary packaging, labels, PET, PVC, and other plastics.

LISTED UNDER: Marking Machines

Vertical Flow Filter Modules

April 1, 2005 6:01 am | Clean Air Products Corp. | Product Releases | Comments

The Series 116 Vertical Flow Filter Modules can install on top of a support frame or be hung below the cleanroom ceiling, drawing air from the room or a return air duct. They are self-contained with filters, lights, and blowers. Frefilters may be located on top or at the front of the units.

LISTED UNDER: Laminar Flow Hood

Design Software

April 1, 2005 6:01 am | Plassotech | Product Releases | Comments

The capabilities of this release of 3G.Design Simulation/Optimization Suite 2005 R1 include the

LISTED UNDER: Product Design & MFG Software

MDT Exclusive: Electronic DHR

April 1, 2005 5:33 am | Brooks Software | Product Releases | Comments

This real-time electronic device history record (eDHR) solution incorporates components of the company’s Factoryworks3 Manufacturing Execution System and AssurX Inc.’s CatsWeb Non-Conformance and Corrective/Preventive Action system.

LISTED UNDER: Compliance Software

Vacuum Cup Accessories

February 28, 2005 8:49 am | Vi-Cas Manufacturing | Product Releases | Comments

A wide variety of accessories are offered to make this company’s line of replacement vacuum cups more effective when used with lifter, manipulators, pick-and-place systems, packaging, label applicators, and other vacuum equipment.

LISTED UNDER: Automation Equipment

Refrigerated Dryer

February 28, 2005 8:46 am | Kaeser Compressors | Product Releases | Comments

The AS-T series rotary screw compressors are available in 20 and 25 hp models. The AS-T series feature integral refrigerated dryers and condensate drains to improve product quality and help reduce wear on production equipment.

LISTED UNDER: Enclosure Cooling | Compressor

Wipes

February 28, 2005 8:46 am | High-Tech Conversions, Inc. | Product Releases | Comments

VISION 1 wipes consist of premium quality virgin polyester fibers that are knitted on state-of-the art equipment especially for use in cleanrooms. This fabric undergoes a multitude of processes including cleaning, scouring, cutting, and a special proprietary cleaning process.

LISTED UNDER: Wipes and Swabs

Filtered Storage Cabinets

February 28, 2005 8:46 am | Clean Air Products Corp. | Product Releases | Comments

The Series 91HF Cleanroom Storage Cabinet uses an aluminum framed, motorized HEPA filter for nearly 100-percent interior cabinet ceiling coverage.

LISTED UNDER: Furniture

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading