UV Laser

October 15, 2004 7:06 am | Product Releases | Comments

The Paladin 355-8000 is a quasi-CW laser that delivers 8 W of output at 355 nm. The increased power enables faster throughput and higher resolution for commercial applications.

LISTED UNDER: Production Tools

Free Software Evaluation

October 15, 2004 6:40 am | Zontec, Inc. | Product Releases | Comments

Zontec, Cincinnati, OH, is offering a free evaluation of its Synergy 2000 statistical process control software for quality assurance professionals. Synergy 2000 is used in quality management applications to monitor and react to process variation during production and inspection.

LISTED UNDER: Process-Control Equipment

Building Automation Into Outsourcing

October 15, 2004 5:30 am | Product Releases | Comments

Not only can automation save valuable time and money, but it can also keep product manufacturing inside the U.S. This exclusive report explores how automation is keeping medical devices closer to home. Eighty percent of the manufacturing cost is built into the product in the initial design.

LISTED UNDER: Automation Equipment | Prototyping | Full Service Contract Manufacturing

Collaboration Shortens Orthopedic Instrument's Design Cycle

October 15, 2004 5:30 am | Product Releases | Comments

The Project: To develop a torque-limiting wrench for a new cervical spine system under time and money constraints. The Solution: Use 3D CAD software and the Internet to communicate design concepts by e-mail and then turn the 3D model into an exact replica of the part in a few hours.

LISTED UNDER: CAD | Prototyping | Rapid Prototyping

Curing Light (1167)

September 3, 2004 5:50 am | Product Releases | Comments

Loctite&reg 7700&#153 Hand Held LED Light Source is a high-powered, portable curing system that consistently cures many UV/visible light curing adhesives in seconds. Featuring patent pending LED curing technology, the 7700 offers a typical output of 500 mW/cm 2 at a wavelength of 405 nm.

LISTED UNDER: Adhesive-Curing Systems

Conveyor (1185)

September 3, 2004 5:50 am | Product Releases | Comments

This unique "open side" low-profile conveyor offers the fastest belt change in the industry&#151two minutes or less on small to medium-size conveyors. On large conveyors, the quick-change design allows 95% or better time savings.

LISTED UNDER: Automation Equipment

Filter End Cap Potting

September 3, 2004 5:50 am | Product Releases | Comments

The DL3-PC utilizes a Posiflow rotary pump design which has no gears to wear and is resistant to abrasive fillers. Both pumps are driven by brushless AC motors. A key feature is touch pad programming of mix ratio and flow rates.

LISTED UNDER: Dispensers/Fillers


September 3, 2004 5:50 am | Product Releases | Comments

The Unistat 291w circulator offers highly efficient heating and cooling from -90&#176C to 200&#176C. It has cooling capabilities up to 19 kW with 24 kW of heating.

LISTED UNDER: Thermoelectric Modules

Cabinets (1037)

September 3, 2004 5:30 am | Product Releases | Comments

Extremely flexible and space efficient, the Series 9000 cabinets can be tailored for a wide variety of applications including the laboratory, R & D center, assembly facility, and manufacturing floor.


Modular Hardwall Cleanrooms

September 3, 2004 5:30 am | Product Releases | Comments

The Series 558 Vertical Flow Hardwall Modular Cleanrooms are available in Class 100 to Class 10. They are manufactured from heavy-duty 16 gauge cold-rolled steel, with a white baked-enamel or powder coat finish.

LISTED UNDER: Modular Cleanrooms

Adhesive Melters (1015)

August 4, 2004 8:16 am | Product Releases | Comments

DuraBlue 50 adhesive melters deliver simplicity, reliability, durability, and performance to product assembly, packaging, and paperboard converting operations. The incorporation of this technology allows optimization of productivity by simplifying installation, operation, and routine maintenance.

LISTED UNDER: Assembly Equipment

Fiber Cutter

August 4, 2004 8:16 am | Product Releases | Comments

The palm-sized Fiber Cutter is designed exclusively for cutting or stripping plastic optical fiber and flexible light pipe cabling. Molded from ABS plastic, the miniature HandyPro Fiber Cutter&#153 measures only 1.75 in. x 1.12 in. and accurately cuts 1.0 mm and 2.

LISTED UNDER: Wire & Cable Cutters

Swabs (987)

August 4, 2004 8:16 am | Qosina | Product Releases | Comments

These lightweight, yet durable swabs help reduce and dissipate static electricity while attracting dirt and dust. Lint-free and non-abrasive, these swabs are gentle enough for even the most delicate surfaces.

LISTED UNDER: Wipes and Swabs

Benchtop Dispenser

July 8, 2004 11:39 am | Product Releases | Comments

The Ultra&#153 2800 DispensLink&#153 system uses positive displacement technology to produce consistent, volumetric shots of epoxies, adhesives, and many other assembly fluids&#151regardless of changes in fluid volume, viscosity, or temperature.

LISTED UNDER: Adhesive Dispensers

Clean Room Chairs

July 8, 2004 11:39 am | Product Releases | Comments

AM Series heavy-duty ergonomic chairs are designed to help clean room personnel remain fresh and productive throughout the workday.



You may login with either your assigned username or your e-mail address.
The password field is case sensitive.